Rey - Star Wars: The Force Awakens Build (open for everyone!)

Whew. Just finished reading everything. Everyone here is so amazing, thank you all so much for working hard to find things for everyone. For every costume I make, I splurge on one item. I'm trying to decided if that will be the staff kit or the boots. Maybe I missed it in the shuffle somewhere but has any one posted a list of hardware store parts they've used for the staff?
 
There is someone who is selling the 3D plans for the staff and depending on the printer you choose to use you might be able to get it printed and built for less than $75. So I would splurge on the boots before splurging on the staff
 
Julietrose said:
There is someone who is selling the 3D plans for the staff and depending on the printer you choose to use you might be able to get it printed and built for less than $75. So I would splurge on the boots before splurging on the staff
Click to expand...
Yes! Now that you mention it I remember seeing that. Whew, now to try to find that post again. Haha
 
06 (1).jpg
07.jpg
010.jpg

First post on this thread.
But, I hope this can help someone.
 

Attachments

  • 00216.jpg
    00216.jpg
    889.4 KB · Views: 234
Last edited:
So I just received my signal satchel in the mail- currently letting it air out! I'm pretty sure I saw on here someone mentioned how to get some of the writing off the bag but I've been looking through and can't find it :( There's just a tiny bit of writing on the top, not bad, but if anyone has a good technique for removing it I'd appreciate it!
 
OMG you guys are amazing. I started at the first page and finally made it to the end. I'm looking to make her costume for MegaCon coming up in May.

Below are some things I found to help you complete your costume without having to make. (Sorry if it has been posted already. There was a lot of reading.)

Her leather cuff
https://www.etsy.com/listing/261335338/rey-inspired-leather-wrist-cuff

Her belt
https://www.etsy.com/listing/261513870/rey-inspired-belt

The doll that was spotted in her place
https://www.etsy.com/listing/263173228/x-wing-pilot-doll

The NN-14 Blaster
https://www.etsy.com/listing/263373120/reys-nn-14-blaster-kit-star-wars-force

After reading everything, I seem to miss the link of where some of you bought the bag and modified into hers. That will be much appreciated.

Is there also a link where I can by the 3D print of her staff?

Mahalo plenty
 
akitzman said:
OMG you guys are amazing. I started at the first page and finally made it to the end. I'm looking to make her costume for MegaCon coming up in May.

Below are some things I found to help you complete your costume without having to make. (Sorry if it has been posted already. There was a lot of reading.)

Her leather cuff
https://www.etsy.com/listing/261335338/rey-inspired-leather-wrist-cuff

Her belt
https://www.etsy.com/listing/261513870/rey-inspired-belt

The doll that was spotted in her place
https://www.etsy.com/listing/263173228/x-wing-pilot-doll

The NN-14 Blaster
https://www.etsy.com/listing/263373120/reys-nn-14-blaster-kit-star-wars-force

After reading everything, I seem to miss the link of where some of you bought the bag and modified into hers. That will be much appreciated.

Is there also a link where I can by the 3D print of her staff?

Mahalo plenty
Click to expand...

I'm ordering from this guy. He's the only one I found that is still doing runs.
http://www.therpf.com/showthread.php?t=253182
 
After reading everything, I seem to miss the link of where some of you bought the bag and modified into hers. That will be much appreciated.
Click to expand...
not sure if you mean the authentic signal satchel, but this is the bag i used:
http://www.amazon.com/Rothco-O-D-Ammo-Shoulder-Bag/dp/B0013O579G/ref=sr_1_1?ie=UTF8&qid=1453253015&sr=8-1&keywords=rothco+ammo+bag

The NN-14 Blaster
https://www.etsy.com/listing/2633731...tar-wars-force
Click to expand...

has anyone here purchased one of these? Wondering how the quality is and if the size is accurate.
 
Last edited by a moderator:
Im confused about the bags too. Maybe I'm getting my Reys mixed up but she has 2 bags? One on her hip and a carry bag? To be honest I have been putting off thinking out the bag because I wanted to figure out the different parts first but I saw this one and thought that maybe it could be altered for the hip bag.
https://www.amazon.com/gp/aw/d/B00D..._UL100_SR100,100_&refRID=FGXZSNCB64HVF30FYZ2K
Please correct me if its way off, too big, wrong color. I do everything from my phone and I get confused. :)
 
ForceAfterCoffe said:
I remember a while back someone mentioned maybe using these pants. I'm wondering if they did and how it turned out? I keep going back and forth wondering if they'll need to be dyed, did we decide if the pants are grey or tan?
https://www.amazon.com/gp/aw/d/B00Z63NNUA/ref=ox_sc_act_image_1?ie=UTF8&psc=1&smid=A2BD19IN7FS1OG
Click to expand...

I purchased these pants. They are one size fits all and on the smaller side, so if you are slender and average height, they would work, but I'm not sure I'd recommend them. They are a bit clingy. The fabric is soft and silky, but I don't think it is right. The fabric on hers seems rougher. Her actual pants seem to be a greyish tan color. I would recommend getting beige or white and dying it.

color.jpg
 
Last edited:
ForceAfterCoffe said:
I cruised through some of your pics on Twitter! Everything is looking really great! Nice job!
Click to expand...

Thank you! The bracer and belt were my first time working with leather in, oh, twenty-five years or so, so I'm pretty pleased they came out as well as they did. The tabards are a little too tan, but I can fix that. ;) I'm tickled with my bag and staff strap for a total of $20 at the surplus store.

Next up? The shirt, pants, and arm wraps!

Thanks again!
 
Mithril Designs said:
I purchased these pants. They are one size fits all and on the smaller side, so if you are slender and average height, they would work, but I'm not sure I'd recommend them. They are a bit clingy. The fabric is soft and silky, but I don't think it is right. The fabric on hers seems rougher. Her actual pants seem to be a greyish tan color. I would recommend getting beige or white and dying it.

View attachment 579691
Click to expand...

Which dye did you use? The pearl grey? I'm average height with a 30 waist. Maybe not a great fit for me. I'll keep looking. Thank you so much for the tip!
 
jackwabbit said:
Thank you! The bracer and belt were my first time working with leather in, oh, twenty-five years or so, so I'm pretty pleased they came out as well as they did. The tabards are a little too tan, but I can fix that. ;) I'm tickled with my bag and staff strap for a total of $20 at the surplus store.

Next up? The shirt, pants, and arm wraps!

Thanks again!
Click to expand...

I have got to get to the surplus store! It's about 40 minutes from me so I'm hoping to get a full shopping list set aside so I only have to go once and hope I can get it all. I can't wait to see your whole costume when you finish it. It's going to look great.
 
You must log in or register to reply here.

Similar threads

madphisto
Costume Research/Development: Morgan Elsbeth's Magistrate Guard/Militia (The Mandalorian S2)
Replies
7
Views
5,117
Bradberry00
Bradberry00
BobaFuss
Luke Skywalker from The Force Awakens
2
Replies
35
Views
9,336
Ridire Firean
R
brickchick1
Kylo Ren Costume-fabric, belt, helmet, etc
Replies
2
Views
3,440
brickchick1
brickchick1
S
Gandalf the Grey
2
Replies
21
Views
37,683
kawabunga
kawabunga
Flagwaver
Who’s afraid of the big, bad Shistavanen Wolfman?
Replies
11
Views
6,346
Daemonhyde
D
Back
Top