PredatrHuntr
Master Member
Looking good Lee! And thank you for tipping the bottle over for the little guy!
P2 Closed Mouth Build. Raw Latex 1St Pull P24 24/11/11
- Thread starter Usurper
- Start date
Darth Pinhead
Active Member
Dude, if YOU drank as much as a bathtub would hold, you'd be passed out, too, LOL...
Love watching the build up of clay. It's pretty cool to see how your mind works as far as which part to build up next...
Love watching the build up of clay. It's pretty cool to see how your mind works as far as which part to build up next...
no its just clay im using for the P2, i told ya i get easily distracted, even more so when ive had a few drinks hehe. 
I am hopefully going to do some more today, i intend on working the brow/eye/nose mouth area today, ( i am fed up of blocking. )
I have a couple of pictures of the look i am going for , i wil post them up later so you can help me see where i am going wrong.
I am hopefully going to do some more today, i intend on working the brow/eye/nose mouth area today, ( i am fed up of blocking. )
I have a couple of pictures of the look i am going for , i wil post them up later so you can help me see where i am going wrong.
another day with not much on, so this afternoon it has been throwing clay at this again.
again i used the worms for rough placement of things on the mouth, along with trimming the brow down,popping in some eyes and fleshing the upper cheaks slightly.
Then i started to again roughly place the crown horns, you can see small hole i dug, i found this helps me ( probably just me ) by securing the horns inplace when pushing them into shape ( i am also clumsy )
When i had done that , i have now spent about 30 mins flattening out some chunks of clay into slabs, i guess i could have done it quicker if i heated them, but its kinda theraputic working the clay into a soft state just via your hands, and besides i am in no rush. ( you can just see them at the bottom of the pic ) I will use these to rough out the outer size of the head, slabs make it real quick to work with. ( even hard clay like this ) I should be done with that fairly quick, and i will post quick pics when i have.
Again this is all just real rough, and i have not begun to check symetry yet ( although i am never overly worried about perfect symetry, as its pretty rare to find real symetrical stuff in nature )
Tools used= only fingers at this point still, apart from the horn holes.
again it still looks like ****, but hopefully that will change in the next couple of days.
again i used the worms for rough placement of things on the mouth, along with trimming the brow down,popping in some eyes and fleshing the upper cheaks slightly.
Then i started to again roughly place the crown horns, you can see small hole i dug, i found this helps me ( probably just me ) by securing the horns inplace when pushing them into shape ( i am also clumsy )
When i had done that , i have now spent about 30 mins flattening out some chunks of clay into slabs, i guess i could have done it quicker if i heated them, but its kinda theraputic working the clay into a soft state just via your hands, and besides i am in no rush. ( you can just see them at the bottom of the pic ) I will use these to rough out the outer size of the head, slabs make it real quick to work with. ( even hard clay like this ) I should be done with that fairly quick, and i will post quick pics when i have.
Again this is all just real rough, and i have not begun to check symetry yet ( although i am never overly worried about perfect symetry, as its pretty rare to find real symetrical stuff in nature )
Tools used= only fingers at this point still, apart from the horn holes.
again it still looks like ****, but hopefully that will change in the next couple of days.
well im done for today, i am not sure when i will get time again, but i am nearly done with the basic shape. it obviously needs refining and the symetry work done, but i think it is not far off the basic shape i am after. i can now start tightening up the shapes and smoothing/filling in the small gaps etc.
I have to change the inner crown as it is too round looking and needs to be longer going up the forehead. although it is not as bad as the photos make it look, it still needs adjusting.
i am only using my iphone at present, i will use a proper camera with plain background from now on, but it would have been a pain in the ass and back to move this with the small updates i am trying to do, as it is now weighing in at 38.06 LB.
Measurement wise is it 13inches at the widest part of the head and 21 inches long from crown to chin.
i have started to work the mouth detail now , as again i wanted a change of view or i would have got bored. I will be working on the eyes/mouth and dred edges when i can, then i will probably finish off the back of the head before working my way around to the closed mandibles area and neck somewhere in the middle ( when i get bored again )
I have to change the inner crown as it is too round looking and needs to be longer going up the forehead. although it is not as bad as the photos make it look, it still needs adjusting.
i am only using my iphone at present, i will use a proper camera with plain background from now on, but it would have been a pain in the ass and back to move this with the small updates i am trying to do, as it is now weighing in at 38.06 LB.
Measurement wise is it 13inches at the widest part of the head and 21 inches long from crown to chin.
i have started to work the mouth detail now , as again i wanted a change of view or i would have got bored. I will be working on the eyes/mouth and dred edges when i can, then i will probably finish off the back of the head before working my way around to the closed mandibles area and neck somewhere in the middle ( when i get bored again
) 
Plasmapredator
New Member
Lookin nice
cant wait to see the painting start though!
cant wait to see the painting start though!
Darth Pinhead
Active Member
Gigitty, gigitty, looking good, brother! This is definitely fun to watch, not to mention, quite helpful to us noobs...
Xterminatus
New Member
Great Work Lee it will be fantastic
predator666
New Member
Epicness at it's finest!
PredatrHuntr
Master Member
Shape is coming along nicely...
MEANGENE83
Sr Member
YUMMY. I can't wait to see you start to detailing the sculpt.
