My Builds: The growing of an eclectic collection
- Thread starter Mara Jade's Father
- Start date
Mara Jade's Father
Master Member
just an update to show off the googles with a much more accurate cap.
I recently sanded off the white paint from the rubber gasket To remove the loose flakes. I had hand painted the area but I am considering trying spray paint instead. Kind of looks cool as is but not sure I’ll keep it.
I recently sanded off the white paint from the rubber gasket To remove the loose flakes. I had hand painted the area but I am considering trying spray paint instead. Kind of looks cool as is but not sure I’ll keep it.
Mara Jade's Father
Master Member
Once again... why isn’t anything ever easy?
After years of just leaving well enough alone, I decided it would be cool to add a logo to my Rogue One rebel soldier helmet.
Trooper_trent made me a great stencil..
So I went to put it one an noticed that everyplace the rubber band hit or the items under the band seemed to be marred...
I’m not sure how to describe it. The paint did not come off. There is nothing on the items I removed. It is more like the items ate away at the shell. Either way, I need to repair it.
I am going to sand down the area and repaint. If there are some scratches left, that’s oky, I just want to get the finish even again. But once I am done, I may not be adding the band, box, and rods again as I do not know how to prevent this from happening. I fear it may not be a paint issue but something with the plastic the shell is made from.
After years of just leaving well enough alone, I decided it would be cool to add a logo to my Rogue One rebel soldier helmet.
Trooper_trent made me a great stencil..
So I went to put it one an noticed that everyplace the rubber band hit or the items under the band seemed to be marred...
I’m not sure how to describe it. The paint did not come off. There is nothing on the items I removed. It is more like the items ate away at the shell. Either way, I need to repair it.
I am going to sand down the area and repaint. If there are some scratches left, that’s oky, I just want to get the finish even again. But once I am done, I may not be adding the band, box, and rods again as I do not know how to prevent this from happening. I fear it may not be a paint issue but something with the plastic the shell is made from.
Mara Jade's Father
Master Member
So I didn’t have to redo the entire shell. I sanded the surface through the acrylic black wash down to the petroleum (green/blue) coat. Got most of the marring look removed. So I just redid the black wash.
I then used the stencil and used Rustolum spray Tuscan Sun yellow. After it dried, I weathered the insignia with some sandpaper and added a black wash of acrylic black. I still want to add a matte clear coat but here it is.
I either want to find a better band or will modify the one I have.
Thanks again to Trooper_trent for the great stencil. Very easy to work with.
I then used the stencil and used Rustolum spray Tuscan Sun yellow. After it dried, I weathered the insignia with some sandpaper and added a black wash of acrylic black. I still want to add a matte clear coat but here it is.
I either want to find a better band or will modify the one I have.
Thanks again to Trooper_trent for the great stencil. Very easy to work with.
Mara Jade's Father
Master Member
I replaced the two wide bands with one single simple rubber band I had laying around. I wish I had another. I think the other ones were too tight and it was screwing up the shell.
After taking photos today, the marring on the shell was more prominent than I thought. At some point in the future, I am going to have to sand the affected areas to get rid of them. The other thing I need to do after looking at on screen images, is add some more bare metal weathering.
Mara Jade's Father
Master Member
So a new chapter in my prop building life has started... I got a 3D printer for Father's Day.
Most of these are files from Thingiverse with some exceptions.
Here is what I have done so far...
Some pendants I made for myself and my daughter. I made the adjusters o the Rose version.
imperial credits
Kyber crystal rack
Beskar ingots
idealized pilot ID plate.
Little nub that fills in the odd open spot of the activation switch of this Savi (Galaxy's Edge) hilt.
Halo Cortana chip variants for my son.
Jurassic Park III 3D printed raptor resonance chamber.
Most of these are files from Thingiverse with some exceptions.
Here is what I have done so far...
Some pendants I made for myself and my daughter. I made the adjusters o the Rose version.
imperial credits
Kyber crystal rack
Beskar ingots
idealized pilot ID plate.
Little nub that fills in the odd open spot of the activation switch of this Savi (Galaxy's Edge) hilt.
Halo Cortana chip variants for my son.
Jurassic Park III 3D printed raptor resonance chamber.
Mara Jade's Father
Master Member
Been working on Sabine’s spray paint gun. Hoping to have it finished this weekend now that I have all the parts printed.
Mara Jade's Father
Master Member
Finished Sabine’s paint gun. I am very happy with how it came out.
Also painted another beskar ingot I had printed a while back. Still looking for a better way to print that has less print line issues. I think I may have to print each side separately and glue together.
Also painted another beskar ingot I had printed a while back. Still looking for a better way to print that has less print line issues. I think I may have to print each side separately and glue together.
Mara Jade's Father
Master Member
Not a prop replica but I felt the need to 3D print something and found this mythosaur skull pendant online. I reprinted the adjusters I designed for the Tico pendant to add some character.
The actual item looks a lot better than this photo. In person, the print lines are not visible. I also distinguished the look between the skull and the horns. One the skull, after I weathered it, I went over it with high grit wet auto sandpaper and some polish to give it a slight luster.
The actual item looks a lot better than this photo. In person, the print lines are not visible. I also distinguished the look between the skull and the horns. One the skull, after I weathered it, I went over it with high grit wet auto sandpaper and some polish to give it a slight luster.
Last edited:
Mara Jade's Father
Master Member
I have been playing with an existing Thingiverse design that can hold the Galaxy’s Edge kyber crystal and tweaking it. You can see my remix of the design here…
Galaxy's Edge Kyber Crystal Chamber Pendant by marajadesfather
UPDATE 17NOV21I made a change to the upper piece and have uploaded it as LIGHT_Top_Kyber_pendant.stl. The section above the threads has been increased by 1% to allow for just enough room to insert a battery operated LED. The exact LED lights I use can be found...
www.thingiverse.com
Last edited:
Mara Jade's Father
Master Member
A couple of recent 3D printed prop replica projects. Both are future gifts for my kids. Both are files found on Thingiverse.
The first is a blade plug I made for a hilt that will also be a gift for my daughter.
The first is a blade plug I made for a hilt that will also be a gift for my daughter.
Last edited:
Mara Jade's Father
Master Member
Next is a Jurassic Park item for my son. The claw is printed and the display is made from clay.
You can see the creator’s tutorial for the display and how to add the texture to the claw here…
You can see the creator’s tutorial for the display and how to add the texture to the claw here…
Mara Jade's Father
Master Member
Forgot to post this. I recently made a slight tweak to the kyber crystal chamber pendant file to allow it to hold a light source.
Last edited:
Mara Jade's Father
Master Member
Mara Jade's Father
Master Member
Here is a quick one I did today, comlink as seen on Rebels. No paint except for a little black wash to make the grill pop. The ends are silver PLA and the body is black PLA. All pressure fit.
Similar threads
