-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Iron Man/War Machine Repulsor Kits - Now on Sale!!! 10/5/2015
- Thread starter darkside501st
- Start date
Re: Darkside501st's Iron Man/War Machine Repulsor Kits - Update 8/3 - New Full Video
Just wanted to share a picture of the latest repulsor prototype circuit. There is just one little issue left to figure out and they we are good to go.
Just wanted to share a picture of the latest repulsor prototype circuit. There is just one little issue left to figure out and they we are good to go.
sylvester86
Active Member
Re: Darkside501st's Iron Man/War Machine Repulsor Kits - Update 8/3 - New Full Video
it's looking good :thumbsup
it's looking good :thumbsup
Re: Darkside501st's Iron Man/War Machine Repulsor Kits - Update 8/3 - New Full Video
We will be checking into having the boards manufactured so I will keep you all updated as more progress is made. I don't have any dates yet.
We will be checking into having the boards manufactured so I will keep you all updated as more progress is made. I don't have any dates yet.
Mr Tallpirate
Member
Re: Darkside501st's Iron Man/War Machine Repulsor Kits - Update 8/3 - New Full Video
Greatly looking forward to the v2.0 repulsors!
Greatly looking forward to the v2.0 repulsors!
Re: Darkside501st's Iron Man/War Machine Repulsor Kits - Update 8/3 - New Full Video
A little update for you all. Unfortunately Finding a suitable replacement for the LED switch has been harder than we thought! We’ve been doing a lot of research trying to find a part that will work. We have ordered a few different ones and those parts should be here on soon.
We are also trying to solve a little issue with the voltage regulator and have been working with the manufacturer to resolve it.
We are so close to being done but these last couple things are standing in the way. We will find the answers so just keep your fingers crossed that it will happen sooner rather than later.
A little update for you all. Unfortunately Finding a suitable replacement for the LED switch has been harder than we thought! We’ve been doing a lot of research trying to find a part that will work. We have ordered a few different ones and those parts should be here on soon.
We are also trying to solve a little issue with the voltage regulator and have been working with the manufacturer to resolve it.
We are so close to being done but these last couple things are standing in the way. We will find the answers so just keep your fingers crossed that it will happen sooner rather than later.
SupremeOrigin
New Member
Re: Darkside501st's Iron Man/War Machine Repulsor Kits - Update 8/3 - New Full Video
Subbed for the 3rd run..
Subbed for the 3rd run..
Re: DarkMatterProps Iron Man/War Machine Repulsor Kits - Update 2/9/2015
Ok, awesome news. We found the parts we need to make the circuit work. We have made the changes to the board design and we are sending it in for what will hopefully be the last prototype for this design. We am really trying to refine the design on this and I think you all will be very happy. Stay tuned for more info. After we get it assembled and tested then I will make a video to demo it and will get a price together for the kit.
Ok, awesome news. We found the parts we need to make the circuit work. We have made the changes to the board design and we are sending it in for what will hopefully be the last prototype for this design. We am really trying to refine the design on this and I think you all will be very happy. Stay tuned for more info. After we get it assembled and tested then I will make a video to demo it and will get a price together for the kit.
soxbaseball0802
New Member
Re: DarkMatterProps Iron Man/War Machine Repulsor Kits - Update 2/9/2015
I've had my project on ice for over a year now, but I'm back. US Marines and all.
Anyways... are you still making these available for a future run?
I've had my project on ice for over a year now, but I'm back. US Marines and all.
Anyways... are you still making these available for a future run?
Re: DarkMatterProps Iron Man/War Machine Repulsor Kits - Update 2/9/2015
Yes, we got the new prototype boards in and are just waiting on a few parts to finish assembling it. Then once we have verified that everything works we will be ordering a run of boards. Stay tuned for more updates.
Yes, we got the new prototype boards in and are just waiting on a few parts to finish assembling it. Then once we have verified that everything works we will be ordering a run of boards. Stay tuned for more updates.
THOMPSONLEE
New Member
Re: DarkMatterProps Iron Man/War Machine Repulsor Kits - Update 2/9/2015
I am interested as well
I am interested as well
Re: DarkMatterProps Iron Man/War Machine Repulsor Kits - Update 2/9/2015
Ok everyone. We are nearing the end of our journey! Our last prototype was a giant success. It has been quite an experience getting to this point but the final result is well worth it. I will be taking some images and a video of the new and improved repulsor circuit.
We have looked into having the boards preassembled so that we can get them out faster and in larger quantities but this would add almost $100 to the price for a set of boards. So we decided that we will handle the board assembly in house. We learned quite a bit from the first couple runs we did and this time around we will be getting some real professional equipment that will be used to improve the assembly process. We have already placed an order for the boards and will be ordering all the parts soon. Our initial order is for 100 boards and parts for them. That will make 50 repulsor kits. I have enough capitol to order everything I need so that I will not need to pre-sell them. We will make the boards and when we have a batch of them ready to go then I will list them for sale.
Stay tuned for more updates that will be coming soon.
DD
Ok everyone. We are nearing the end of our journey! Our last prototype was a giant success. It has been quite an experience getting to this point but the final result is well worth it. I will be taking some images and a video of the new and improved repulsor circuit.
We have looked into having the boards preassembled so that we can get them out faster and in larger quantities but this would add almost $100 to the price for a set of boards. So we decided that we will handle the board assembly in house. We learned quite a bit from the first couple runs we did and this time around we will be getting some real professional equipment that will be used to improve the assembly process. We have already placed an order for the boards and will be ordering all the parts soon. Our initial order is for 100 boards and parts for them. That will make 50 repulsor kits. I have enough capitol to order everything I need so that I will not need to pre-sell them. We will make the boards and when we have a batch of them ready to go then I will list them for sale.
Stay tuned for more updates that will be coming soon.
DD
Re: DarkMatterProps Iron Man/War Machine Repulsor Kits - Update 2/9/2015
Alright, I have some great news. Two different things actually. First, we finalized the programming on the boards and now everything is ready to do the demo. I just need to find some time to get that done. Second, there was some kind of error when they gave us the quote for assembling the boards. It looks like we will have the boards assembled by a circuit manufacturing company after all! This means we will get all the boards at the same time and then all we have to do is attach the wires, sensors, battery packs, and program the microcontrollers in order to get them ready to ship. This will be a huge time saver and it also means we will have a more reliable and consistent product in the end.
Stay tuned for more updates.
PS- did you all see my new Iron Man fingers? I am taking orders on raw cast kits again for fingers, gloves, and gauntlets.
http://www.therpf.com/f75/tony-stark-iron-man-war-machine-gloves-gauntlets-open-run-199540/
Alright, I have some great news. Two different things actually. First, we finalized the programming on the boards and now everything is ready to do the demo. I just need to find some time to get that done. Second, there was some kind of error when they gave us the quote for assembling the boards. It looks like we will have the boards assembled by a circuit manufacturing company after all! This means we will get all the boards at the same time and then all we have to do is attach the wires, sensors, battery packs, and program the microcontrollers in order to get them ready to ship. This will be a huge time saver and it also means we will have a more reliable and consistent product in the end.
Stay tuned for more updates.
PS- did you all see my new Iron Man fingers? I am taking orders on raw cast kits again for fingers, gloves, and gauntlets.
http://www.therpf.com/f75/tony-stark-iron-man-war-machine-gloves-gauntlets-open-run-199540/
Last edited by a moderator:
RustyPonds
New Member
Re: DarkMatterProps Iron Man/War Machine Repulsor Kits - Update 2/9/2015
...
...
...
...
Similar threads
- Sale
