-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run === G R A F L E X === Flashgun Gen.2 ... now taking PRE-ORDERS!!! New Pics Oct. 5
- Thread starter Romans Empire
- Start date
ichnob
Sr Member
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
YMMV, but this worked for me. Bought it at Harbor Freight for $5. Worked on my Romans and 2.0, but it's not something I'd constantly remove and replace. http://www.harborfreight.com/16-piece-precision-screwdriver-set-4143.html
YMMV, but this worked for me. Bought it at Harbor Freight for $5. Worked on my Romans and 2.0, but it's not something I'd constantly remove and replace. http://www.harborfreight.com/16-piece-precision-screwdriver-set-4143.html
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
1/8" or 3mm hex driver. Personally I like the 1/8th ones but 3mm should work, its a difference of 7 thou (0.007")
TGS ones are nice but $20 plus shipping is steep. Any quality 1/8" nut driver would be good to pick up if you plan on taking them out more than once. You can find them on amazon, ebay and hobby shops (for RC cars)
Alot of people have had success with the ones you find in the kit at Harbor freight or Walgreens like Ichnob pictured.
1/8" or 3mm hex driver. Personally I like the 1/8th ones but 3mm should work, its a difference of 7 thou (0.007")
TGS ones are nice but $20 plus shipping is steep. Any quality 1/8" nut driver would be good to pick up if you plan on taking them out more than once. You can find them on amazon, ebay and hobby shops (for RC cars)
Alot of people have had success with the ones you find in the kit at Harbor freight or Walgreens like Ichnob pictured.
kman
Well-Known Member
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
I believed I watched a YouTube video at one point with a guy who noted that standard nut drivers aren't deep enough, but you can carefully drill a deeper socket into them sometimes, if it's something you'll be doing often enough to justify modding a tool for the purpose.
I believed I watched a YouTube video at one point with a guy who noted that standard nut drivers aren't deep enough, but you can carefully drill a deeper socket into them sometimes, if it's something you'll be doing often enough to justify modding a tool for the purpose.
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
i searched harbor freights website but this didnt come up, i ordered one that tom suggested last night, but I'm going to pick up this set as well, cheap enough. thank you very much
- - - Updated - - -
thank you very much tom!!
i searched harbor freights website but this didnt come up, i ordered one that tom suggested last night, but I'm going to pick up this set as well, cheap enough. thank you very much
- - - Updated - - -
thank you very much tom!!
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
If you have other hobbies that require small drivers, I highly recommend buying the Wiha precision nut driver sets. you can find them on Amazon. I bought the standard and metric sets, love them.
If you have other hobbies that require small drivers, I highly recommend buying the Wiha precision nut driver sets. you can find them on Amazon. I bought the standard and metric sets, love them.
luke182w
Active Member
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
Are most of you putting the grips on just by using the adhesive backing or are people screwing them in place as well?
If screwing, is it best to stick them in place first and then screw the holes with them in place?
Can anyone point me in the direction of a template for the ESB model? I'm really worried about screwing up the placement.
Are most of you putting the grips on just by using the adhesive backing or are people screwing them in place as well?
If screwing, is it best to stick them in place first and then screw the holes with them in place?
Can anyone point me in the direction of a template for the ESB model? I'm really worried about screwing up the placement.
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
http://wannawanga.com/tutorials/luke-esb-tutorial/
Sent from my SM-J700P using Tapatalk
Check out Roy's tutorial on how to do an ESB graflex
http://wannawanga.com/tutorials/luke-esb-tutorial/
Sent from my SM-J700P using Tapatalk
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
Thanks to everyone who supported this project!!! The Graflex is now SOLD OUT. :ninja
Thanks to everyone who supported this project!!! The Graflex is now SOLD OUT. :ninja
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
Wow! Thank you for doing everything you have done. You are a true asset to this community
All hail Roman!
Sent from my iPhone using Tapatalk
Wow! Thank you for doing everything you have done. You are a true asset to this community
All hail Roman!
Sent from my iPhone using Tapatalk
Lichtbringer
Master Member
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
Thanks again for your engagement. :thumbsup
Thanks again for your engagement. :thumbsup
russellsch
Master Member
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
Truly an amazing & masterful work sir.
Thank you!
:cheers
Truly an amazing & masterful work sir.
Thank you!
:cheers
Endless Wonder
Sr Member
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!
I literally just ordered one three days ago. Glad I did! Can't wait to get it.
Are you ever going to restock, or was this it?
I literally just ordered one three days ago. Glad I did! Can't wait to get it.
Are you ever going to restock, or was this it?
Re: === G R A F L E X === Flashgun ... SOLD OUT... for now...
FYI, run #2 is not out of the question... that is all.
FYI, run #2 is not out of the question... that is all.
Re: === G R A F L E X === Flashgun ... SOLD OUT... for now...
theres one in the junkyard as we speak, seller is panaflex
theres one in the junkyard as we speak, seller is panaflex
Similar threads
