Limited Run === G R A F L E X === Flashgun Gen.2 ... now taking PRE-ORDERS!!! New Pics Oct. 5

Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Does anyone know offhand if the glass eye is made of brass?

I need to trim down the knurling to convert it to a TFA saber and wany to know if the brass will be under the plating.
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

DARTH SABER said:
Does anyone know offhand if the glass eye is made of brass?

I need to trim down the knurling to convert it to a TFA saber and wany to know if the brass will be under the plating.
Click to expand...

Yes sir :)

glseye_RE.jpg
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

I turned down the knurling on my Roman's Graflex replica glass eye.
This is also what those shiny brass pins look like after sitting in ammonia fumes for about 4 hours:
Roman_Graflex01.png

Graflex_Closeup01.jpg

I also replaced my ears and screw with a vintage set. :)

Thanks again Roman!
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Got mine in today as well (January order). Honestly, it's about as perfect replica I've ever seen. The ONLY way I could tell real fast compared to my real one is only becuase my real one has a bit more wear.

Great job Roman, and I've sent you a message about a small error in my order.

-Gary
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Pixelpiper said:
Which are closest to, and can they be interchanged with, vintage?
Click to expand...

The lever that comes on the flash is closer to the real thing. But the bars on the standalone clamp look closer to the real ones, the flash version has little notches cut out of the corners of the bars where they are bent and the real one doesnt have those.
 
Last edited:
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Are the belt tabs that support the ears cracked in that photo? It looks like the metal is cut on the back side.
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

They only look like that at the corners, not all the way across.
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Romans Empire said:
Correct. Two different vendors.

My stand alone clamps were made from the vendor that wanted to make the Graflex from Stainless Steel.
Click to expand...

Would they just NOT make them from nickel plated brass for some reason?
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

They arrived safe and sound!!!!!!!!!!!!!!!:D:D:D
Roman You're the man!!! You did it very close to the 29th of December, my birthday as well!! What a present!!!:cool

Regards,

Alberto
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Pixelpiper said:
Are the belt tabs that support the ears cracked in that photo? It looks like the metal is cut on the back side.
Click to expand...

Kylash said:
They only look like that at the corners, not all the way across.
Click to expand...


If they have a begining crack already, they probably are not a good start to make a saber version with bent back tabs (like the Vader ROTJ, for example). Those tabs are already stressed and prone to breaking without having those cracks. Bending them back flat easily makes them break off.
 
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Also curious how others are grinding the knurling off their glass eye and keeping it smooth. Just go at it with a dremel?
 
Last edited:
Re: === G R A F L E X === Flashgun ... NOW SHIPPING!!!

Today is my expected delivery day as well!
 
You must log in or register to reply here.

Similar threads

guabe
Limited Run Monarchy: a Laredo Sabers Original
Replies
1
Views
544
guabe
guabe
silkscreener
Limited Run Superman MOS Shield Emblems @$75
Replies
2
Views
698
chadcham
C
lukyanov
«SQUID» Sol's lightsaber from "Acolyte" replica (by Lukyanov) [pre-orders]
2 3 4
Replies
60
Views
9,037
subaru
subaru
derekwest1989
  • Sale
Vintage Graflex 2 cell and other hilts
Replies
4
Views
749
derekwest1989
derekwest1989
Zlurpo
Interest GotG vol 2 Jacket: A New Production Run
Replies
1
Views
617
DaftJester
D
Back
Top