Gorgot3000
Sr Member
It's not 100% screen accurate but it's the closest I could find .... and it's comfortable for the wrist because it's made of rubber :lol
Evil Dead II/Army of Darkness replica chainsaw
- Thread starter jimmydellamorte
- Start date
It's not 100% screen accurate but it's the closest I could find .... and it's comfortable for the wrist because it's made of rubber :lol
tuskentrooper
Sr Member
Gave this old thread an "Ash" Wednesday shout-out on the RPF Facebook page!
ob1al
Sr Member
Drac - eBay is your best bet for a base chainsaw. They do come up from time to time.
Almost finished mine, finally. I'm just waiting on one of PeteVenkman's grills to finish it with, plus maybe adding some fake blood:
Cutting the engine down was a bit of a chore, but it's comfortable enough inside now. The hand opening is still a tight fit, but it's fine once it's 'on', if you know what I mean.
Almost finished mine, finally. I'm just waiting on one of PeteVenkman's grills to finish it with, plus maybe adding some fake blood:
Cutting the engine down was a bit of a chore, but it's comfortable enough inside now. The hand opening is still a tight fit, but it's fine once it's 'on', if you know what I mean.
Drac
Sr Member
nice work there m8 Deathstalker II
Well-Known Member
You guys are doing kick ass work.
One of you intrepid, artful humans should toss your fuel and oil caps into some silicone. I've a saw that needs a set...
One of you intrepid, artful humans should toss your fuel and oil caps into some silicone. I've a saw that needs a set...
Drac
Sr Member
Howlrunner
Master Member
Looking good. Any plans to swap out the face with one of Bruce's lifecasts?
Howlrunner
Master Member
Yeah. I did very little "sculpting" to it though - just opened up the eyes (so sculpted eyelids), sculpted scars, added lifecasts of my ears, and bulked out the back of the head with carved floral foam and plaster bandages. It was a one off though - didn't even think to cast it. Haunted Studios has the best price for the Bruce lifecast(s).
PeteVenkman
Well-Known Member
Mannequin is looking sharp!
jimmydellamorte
Well-Known Member
![IMG_2494[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5623-b3115088effba7ace46b884ada410611.jpg "IMG_2494[1].JPG")
Been in the institution for a stint... Had a mental breakdown and tried to off myself... TMI hahaha but yea, figured I'd post my saw pics on here since I kind of started this post.
It's about 95% done.
Just need to take pics of it as it is right now (fixed the top plate bolts/made a new setup for the inside/painted some more oil distressing and so forth) and to complete it, I need to plasti-dip the side handle and then add the gore fx.
I'm so in love with my chainsaw... Think I did a pretty damn good job for a "mask maker". My first real prop project that's worth a damn.
Anyhoo, I will get more progressive pictures of the beast soon, for now there's these:
![IMG_2511[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5625-87ba40523104e2b829254f4ea1fbc884.jpg "IMG_2511[1].JPG")
![IMG_2510[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5626-99e00a0c088bcbf541fcdded74ab31d8.jpg "IMG_2510[1].JPG")
![IMG_2509[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5628-82d6c0da04bd1dd096ec57c8b03efda6.jpg "IMG_2509[1].JPG")
![IMG_2508[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5629-6f7305adf0c1f4b6d2db9651f3a7f3be.jpg "IMG_2508[1].JPG")
![IMG_2507[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5630-c95209e3e7cba6de2c88375169d4fffa.jpg "IMG_2507[1].JPG")
![IMG_2506[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5631-d9cbb6042487d227965114adbecb57cb.jpg "IMG_2506[1].JPG")
![IMG_2505[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5632-8d0146e61b679b7f75dc70e20355b761.jpg "IMG_2505[1].JPG")
![IMG_2504[1].JPG](https://therpf-f28a.kxcdn.com/forums/data/attachments/5/5633-c97c9e794e923fb111e82eb58bd24a24.jpg "IMG_2504[1].JPG")
jimmydellamorte
Well-Known Member
Thinking about showing off my "final work" even though it seems this is one of those projects you seem to constantly tweak.
Gonna be putting together a Dr. Philip K. Decker from Nightbreed costume this year so this project seems about la fin.
If anyone wants my saw for their personal collection shoot me an email and I just may consider selling it. Otherwise it's going on my wall and going to be forgotten about other than horror memorabilia decor. I can also do any silicone/resin pulls of parts and pieces you guys may need to complete your saws.
Going to start a Decker thread soon so anyone of you that want to help me accumulate the props and accurate pieces mosey on over there when I link you to it via final saw pics post.
I want to thank all of you for your enthusiasm and support as a heads up.
Gonna be putting together a Dr. Philip K. Decker from Nightbreed costume this year so this project seems about la fin.
If anyone wants my saw for their personal collection shoot me an email and I just may consider selling it. Otherwise it's going on my wall and going to be forgotten about other than horror memorabilia decor. I can also do any silicone/resin pulls of parts and pieces you guys may need to complete your saws.
Going to start a Decker thread soon so anyone of you that want to help me accumulate the props and accurate pieces mosey on over there when I link you to it via final saw pics post.
I want to thank all of you for your enthusiasm and support as a heads up.
