-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run De Agostini Millennium Falcon 3D printed upgrades
- Thread starter FZ6
- Start date
-
- Tags
- star wars a new hope
I know right... Dang you Tom and your sexy alluring Jedi mind tricks of perfection! Just one thing thou (as my ocd starts to rear it's ugly head), I was just talking about the main console piece itself that the sticker is laid onto. Just taht one part with the holes where the original piece are (for the parts that come in for it later), just with raised buttons (and maybe the rear chairs too... those are just too darn cool!)
Happy that you liked it!!!
Thanks!
- - - Updated - - -
You better start saving the lunch and coffee money!!! Hahahahaha :lol
CelticWarrior
Well-Known Member
Wow, missed the cockpit. Thats my next buy. The sticker on the Deago version is pretty rubbish. I also don't like the computer in the hall section either, Any plans for that? I've added greebles to mine but it's not sitting right with me. Infact im prety let down with all the interior hall parts so far.
Hi Celtic.
Thanks for the suggestion. I will try to design it too.
I will start grabbing info from the net...
Many thanks for your support!!!
CelticWarrior
Well-Known Member
There's a couple of reference pics in this thread although I don't know how accurate they are., clicking on top picture takes yo to some more interior renders...
http://forum.buildmillenniumfalcon.com/forums/topic/brians-build-log/page/23/
http://forum.buildmillenniumfalcon.com/forums/topic/brians-build-log/page/23/
From what I've seen of the interior back wall close to the hallway behind t he seats, it does look a bit rubbish. Something a bit more authentic would make for a better look and feel of that area, I agree!
Trying to figure out what to do with my extra Deag parts after getting all of Tony's ?????????
I really just wanted a better console, as mentioned the sticker is, well a sticker.
Now I want the entire cockpit and back wall/upper wall, then I really need the cone that goes with it.
Then I end up with an entire Cockpit Cone from the Deag.
Coolio!!!!!!!!!!!!!!!! Extra parts to display.
Seriously I love Tony,....and kinda hate him.
I really just wanted a better console, as mentioned the sticker is, well a sticker.
Now I want the entire cockpit and back wall/upper wall, then I really need the cone that goes with it.
Then I end up with an entire Cockpit Cone from the Deag.
Coolio!!!!!!!!!!!!!!!! Extra parts to display.
Seriously I love Tony,....and kinda hate him.
New stuff!!!
You know my new cockpit, now you can have also the cabin cone and the cabin walls.
The cone has been ultradetailed on the inside, with the back of the window frames full of the original greeblies, hoses, boxes and panels. It has also built in side consoles.
All the kit has been designed to come together, so they won't work with the original cockpit, cone and walls of the De Agostini kit.
The cabin cone
https://www.shapeways.com/product/3U5DDXDEQ?li=shop-results&optionId=56054639
The cabin walls
https://www.shapeways.com/product/XUK3YDB6D?li=shop-results&optionId=56047375
Many thanks for watching!
You know my new cockpit, now you can have also the cabin cone and the cabin walls.
The cone has been ultradetailed on the inside, with the back of the window frames full of the original greeblies, hoses, boxes and panels. It has also built in side consoles.
All the kit has been designed to come together, so they won't work with the original cockpit, cone and walls of the De Agostini kit.
The cabin cone
https://www.shapeways.com/product/3U5DDXDEQ?li=shop-results&optionId=56054639
The cabin walls
https://www.shapeways.com/product/XUK3YDB6D?li=shop-results&optionId=56047375
Many thanks for watching!
And another release!
This time is a new hall navigation console for the hall.
With this consoles you can play with fiber optics or a back led, because it has built in more than 80 pre drilled holes, and more than 120 raised buttons.
Of course, the console is a very close replica from the original studio filming model seen on ESB.
https://www.shapeways.com/product/VR4AND43R?li=shop-results&optionId=56077264
Many thanks for watching!!
This time is a new hall navigation console for the hall.
With this consoles you can play with fiber optics or a back led, because it has built in more than 80 pre drilled holes, and more than 120 raised buttons.
Of course, the console is a very close replica from the original studio filming model seen on ESB.
https://www.shapeways.com/product/VR4AND43R?li=shop-results&optionId=56077264
Many thanks for watching!!
Some of you asked me to make a new part for the cone, the upper controls.
So here it is:
https://www.shapeways.com/product/LQ374U96P?li=shop-results&optionId=56095163
The blue part is the new upgrade. Just to be glued to my cabin cone, taking in account the upper wall. Very simple. I haven't tested it on the standard DeAgo cone, but maybe it can be adapted for it.
I've designed the same part for the Hasbro kit.
Many thanks for watching!
So here it is:
https://www.shapeways.com/product/LQ374U96P?li=shop-results&optionId=56095163
The blue part is the new upgrade. Just to be glued to my cabin cone, taking in account the upper wall. Very simple. I haven't tested it on the standard DeAgo cone, but maybe it can be adapted for it.
I've designed the same part for the Hasbro kit.
Many thanks for watching!
Tony is it possible to make all the bits and bobs and tables from your cockpit cone seperate to fit the Deago Cockpit Cone??
I really don't want to get another cockpit cone. I really like the base color and paint job of the Deago and just plan to add to it as far as weathering, damage, etc.
Also is it possible to make the chairs and dash seperate?? I really love your dashboard and what not but I don't want to replace everything. Still need all your New Hasbro 29" parts and Legacy parts as well It's really adding up.
I really don't want to get another cockpit cone. I really like the base color and paint job of the Deago and just plan to add to it as far as weathering, damage, etc.
Also is it possible to make the chairs and dash seperate?? I really love your dashboard and what not but I don't want to replace everything. Still need all your New Hasbro 29" parts and Legacy parts as well
It's really adding up.
Tony is it possible to make all the bits and bobs and tables from your cockpit cone seperate to fit the Deago Cockpit Cone??
I really don't want to get another cockpit cone. I really like the base color and paint job of the Deago and just plan to add to it as far as weathering, damage, etc.
Also is it possible to make the chairs and dash seperate?? I really love your dashboard and what not but I don't want to replace everything. Still need all your New Hasbro 29" parts and Legacy parts as well
Hey Tom!
Yes, it is. As soon as I get my De Agostini standard cone, I will be able to do that.
I can separate the main console, side consoles and seats. No problem pal!
Yes, you will be able to keep your standard cone. Don't worry my friend!
Many thanks for your help and support!!!
Cheers
Correction: I've checked my De Agostini standard cockpit and I think that my cockpit bits will fit inside the standard cone. Maybe some slight sanding and you're done.n Going to release that!
Last edited:
More and more upgrades!!!
I've designed a new set of cockpit parts, just in case you want to keep your original De Agostini cone.
So now I've made available my cockpit main console without the floor, together with the two pilot seats and nav seats, plus the two side consoles. 7 parts in total that you can glue on the De Agostini original floor. These parts will fit, more or less the room of the original De Agostini cabin cone. Maybe you will need a light sanding and, of course, drill some holes on the floor for the seats.
https://www.shapeways.com/product/SNGXEJG9A?li=shop-results&optionId=56101562
Many thanks for watching!
I've designed a new set of cockpit parts, just in case you want to keep your original De Agostini cone.
So now I've made available my cockpit main console without the floor, together with the two pilot seats and nav seats, plus the two side consoles. 7 parts in total that you can glue on the De Agostini original floor. These parts will fit, more or less the room of the original De Agostini cabin cone. Maybe you will need a light sanding and, of course, drill some holes on the floor for the seats.
https://www.shapeways.com/product/SNGXEJG9A?li=shop-results&optionId=56101562
Many thanks for watching!
Hi Scott.
Sounds strange, but's true.
Some guys asked me to keep the original cone but with my inner parts...
Just releasing what people is asking me...
Many thanks for your interest!
Tony, any chance you could offer this option with the floor? I want your entire cockpit interior including the side consoles. The only way I can get the side consoles without the cone is this option, but this option does not include the floor.
The way you currently have your parts offered I would have to buy the cone just to get the side consoles.
I don't want the cone just all the interior parts.
Last edited:
Hi Zen.
Yes, of course.
I will make the kit and I will upload it to the shop ASAP.
Many thanks for your interest!
Best
