Unlimited Run Hasbro Millennium Falcon 3D printed upgrades

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


FZ6

Sr Member
RPF PREMIUM MEMBER
If you have bought a new Hasbro Falcon, you will need a big bunch of upgrades to convert this toy in a Studio Scale model.
It has the correct size and proportions, and with my upgrades you will have an authentic Studio Scale Falcon!

I've designed a big bunch of 3D printed upgrades. Just take a look and, if you want, just order on-line.

To see all my 3D printed Hasbro falcon upgrades, go to:


https://www.shapeways.com/shops/308bits?section=Falcon+HSBRO&s=0

And here the direct links to my Hasbro upgrades:

-Complete cabin cockpit for the standard cone
https://www.shapeways.com/model/2787872/millennium-hsbro-cabin-cockpit.html?li=shop-results&materialId=60

-Cabin back wall and upper wall for the standard cone
https://www.shapeways.com/model/2797824/millennium-hsbro-set-cabin-cockpit-walls.html?li=shop-results&materialId=61

-Cabin door
https://www.shapeways.com/product/ZUCB7YG8H?li=shop-results&optionId=55521869

-Cabin cone long
https://www.shapeways.com/model/2907516/millennium-hsbro-cabin-cone-long.html?li=shop-results&materialId=60

-Cockpit for the cabin cone long:
https://www.shapeways.com/product/QK8WENGPC?li=shop-results&optionId=43516364

-Cabin upper and back wall for the cabin long:
https://www.shapeways.com/product/EWSLNG5YC?li=shop-results&optionId=42290798

-Complete set of external sidewalls (6)
https://www.shapeways.com/model/2874212/millennium-hsbro-sidewall-esb-left-back.html?li=shop-results&materialId=61
https://www.shapeways.com/model/2885141/millennium-hsbro-sidewall-esb-right-rear.html?li=shop-results&materialId=61
https://www.shapeways.com/model/2888852/millennium-hsbro-sidewall-esb-right-middle.html?li=shop-results&materialId=60
https://www.shapeways.com/model/2818767/millennium-hsbro-sidewall-esb-right.html?li=shop-results&materialId=61
https://www.shapeways.com/model/2856897/millennium-hsbro-sidewall-esb-left-front.html?li=shop-results&materialId=61
https://www.shapeways.com/model/2860094/millennium-hsbro-sidewall-esb-left-middle.html?li=shop-results&materialId=61

-Internal mandibles sidewalls
https://www.shapeways.com/model/2946388/millennium-hsbro-mandibles-sidewalls-esb.html?li=shop-results&materialId=61

-Turret well
https://www.shapeways.com/model/2943049/millennium-hsbro-turret-well.html?li=shop-results&materialId=61

-Turret well window
https://www.shapeways.com/model/2942780/millennium-hsbro-turret-well-window.html?li=shop-results&materialId=61

-Laser cannons
https://www.shapeways.com/model/2767979/millennium-hsbro-lasers.html?li=shop-results&materialId=60

-Laser cannons yoke
https://www.shapeways.com/model/2860858/millennium-hsbro-yoke-lasers.html?li=shop-results&materialId=60

-Radar dish 67mm and Radar dish support structure
https://www.shapeways.com/model/2983470/millennium-hsbro-set-radar-67-mm-and-support.html?li=shop-results&materialId=61

-Engine louver arms
https://www.shapeways.com/model/3005588/millennium-hsbro-engine-louver-arm-32-inch.html?li=shop-results&materialId=61

-Front landing gear set
https://www.shapeways.com/model/2816466/millennium-hsbro-front-landing-gear-set.html?li=shop-results&materialId=60

-Rear landing gear set
https://www.shapeways.com/model/2895854/millennium-hsbro-set-rear-landing-gear.html?li=shop-results&materialId=61

-Quad radar dish from Episode VII
https://www.shapeways.com/model/2904821/millennium-hsbro-radar-dish-ep-vii-69-mm.html?li=shop-results&materialId=61


Many thanks for watching!
 
Last edited by a moderator:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

FZ6

Sr Member
RPF PREMIUM MEMBER
Just to let you know about the quality of these parts.

My upgrades have been used by Marc Elkins to modify four Hasbro Falcons.

You can see my parts featured on the Modeler Magic article:

http://www.modelermagic.com/?p=65981

Just watch the photos of my upgrades.


Many thanks for watching
 

FZ6

Sr Member
RPF PREMIUM MEMBER
Another reputed artist that is using my Hasbro upgrade parts is Randy Cooper.

You can see my parts on his Facebook page!

RANDY COOPER USES MY HASBRO PARTS.jpg

On the image you can see my cockpit parts, upper and back wall, cockpit and cone.

Many thanks for watching!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

FZ6

Sr Member
RPF PREMIUM MEMBER
Looking great! Do you have a kit price (every part included)?

Hi Nils.

Many thanks for your interest!

For the 3D printed parts, they're sold individually, but can be ordered all at once, only a part or only a few. As you want.

As the parts are 3D printed individually for you when you order them, you can make a purchase whenever you want, and the amount you want. So you can plan to buy the parts gradually on line. In 15 days -or less- the parts are at your door.

On other hand, me and Mike Salzo we are preparing too a resin kit based on these 3D printed high detailed parts, and it will be available very soon. I will post here.

If you have further questions don't hesitate to get back to me.
Many thanks again for your interest.

Best
 

FZ6

Sr Member
RPF PREMIUM MEMBER
You can see an example of the quality detail of my sidewalls.

MILLENNIUM FALCON HASBRO SIDEWALLS.jpg

All the upgrades that I've designed are totally accurate with the 32" Falcon. So you can convert the Hasbro on a Studio Scale model. Every little detail of the original studio filming model has been reproduced on my parts.

In fact, my cockpit has more detail than the Studio Scale Falcon...

You can have a Studio Scale Falcon for a fraction of the cost of an original Studio Scale Falcon. People is asking $4.000 bucks for one SS model! You can have one for less than $700.

Many thanks for watching!
 

FZ6

Sr Member
RPF PREMIUM MEMBER
To design the Hasbro sidewalls upgrades, I've used the original shots of the 32" studio filming Falcon, and the measurements taken for my friend Jedi Dade on his Studio Scale Master Replica Falcon.
With his help and his very accurate measurements, I've designed the sidewalls.

So the sidewalls are a real replica of the original falcon. Nobody is offering such accurized parts for the Hasbro.

FALCON MEASUREMENTS.jpg


Many thanks for watching!!!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

FZ6

Sr Member
RPF PREMIUM MEMBER
The back wall of the cabin has been designed following the original 1:1 studio filming model.
On the back wall I've designed approximately 150 holes, so it's fiber optics ready!!!

On this image, courtesy of Marc Elkins -shown on Modeler Magic (many thanks Kuhn!)- http://www.modelermagic.com/?p=65981 you can see the size and the high detail.

IMG_13441.jpg

Many thanks for watching!
 

FZ6

Sr Member
RPF PREMIUM MEMBER
Josh, one of the guys here at RPF, has published a shot of my back wall with fiber optics lighting. Thanks Josh!

You can put more than 300 fiber optics wires on my cabin walls!!!!

Are you ready for this? Are you skilled enough for this? :cool :D


MF HASBRO CABIN WALLS FIBER OPTICS.jpg

Many thanks for watching!
 

FZ6

Sr Member
RPF PREMIUM MEMBER
The laser cannons, the quad laser, have the same design than the original cannons seen on the studio filming model.

Of course, these cannons have more detail and better proportions than the Hasbro cannons.

A good upgrade, a must have.

Thanks to Leyrich for the shot!

MILLENNIUM FALCON HASBRO LASERS 2.JPG

Many thanks for watching!
 

FZ6

Sr Member
RPF PREMIUM MEMBER
The quad laser upgrade looks nice!!!

A very big improvement over the standard Hasbro cannons!

I've designed the cannons following the original studio filming model. And the result I think that's quite good!

Many thanks to Leyrich form the shot.


MILLENNIUM FALCON HASBRO LASERS hand.JPG

Many thanks for watching!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

FZ6

Sr Member
RPF PREMIUM MEMBER
Here you can see an astronaut showing you my turret well window. As you probably know, the turret window well of the Hasbro is blind. So you can have a new window just cutting the old one, and replacing it with my very detailed window.

The window fits perfectly the size of the Hasbro kit. It's just plug&play, as you can see on the image -courtesy of Leyrich! Thanks!-.

I've designed the window following closely the original part of the studio filming model.

If you want to check all my Hasbro upgrades, just visit:

https://www.shapeways.com/shops/308bits?section=Falcon+HSBRO&s=0

MILLENNIUM FALCON HASBRO TURRET WINDOW.JPG

Many thanks for watching!
 

FZ6

Sr Member
RPF PREMIUM MEMBER
Another shot to see the turret well window.

You can see also the mandibles inner side walls, highly detailed, a replica of the ones seen on the 32" studio filming Falcon.


MILLENNIUM FALCON HASBRO MANDIBLES SIDEWALLS TURRET WINDOW.JPG


Many thanks for watching -and many thanks to Leyrich for the shot!-
 

FZ6

Sr Member
RPF PREMIUM MEMBER
A photo worth more than a million words...


MILLENNIUM FALCON HASBRO LASER.JPG

My 3D printed laser cannons on the left. The Hasbro ones, at the right..

Many thanks to Leyrich for the shots!


And many thanks for watching!
 

FZ6

Sr Member
RPF PREMIUM MEMBER
More details, this time from the inner mandibles sidewall parts.

The inner part has been designed following the original 32 incher. A quasi perfect replica.

Note that the two parts are different, not a simpler mirrored part. Each side is different. Of course, thanks to Leyrich for the shots.

MILLENNIUM FALCON HASBRO INNER MANDIBLES SIDEWALL.JPG


Many thanks for watching!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top