-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Dawn of Justice Batman Vs. Superman.. Cowl, Emblem, Gauntlets, Belt *new pics #262*
- Thread starter TheRocketeer
- Start date
mrnaderdude
New Member
Re: Ben Affleck Batman Cowl from Dawn of Justice 3D print
I'm interested
sign me up
I'm interested
sign me up
TheRocketeer
Master Member
Re: Ben Affleck Batman Cowl from Dawn of Justice 3D print
On the list, and yes I am trying my best to make it fit a 24" head.. PM sent
Thanks listed
Everything will be as screen accurate as I can make it.. Out of curiosity where did you get a cowl already?
Thank you so much, I try my best and you are listed sir
Yep as stated above I will try my best to make it fit a 24" head
Thanks
Added to the list
Thanks marked down
Signed up
On the list, and yes I am trying my best to make it fit a 24" head.. PM sent
Thanks listed
Everything will be as screen accurate as I can make it.. Out of curiosity where did you get a cowl already?
Thank you so much, I try my best
and you are listed sir Please put me on the list... you know I am good for it
I have more than enough experience with your amazing work and your cowls to be able to tell everyone here to get on this now!
Yep as stated above I will try my best to make it fit a 24" head
I'll take the cowl as long as it fits a 24" noggin
Thanks
Added to the list
Thanks
marked downSigned up
I'm interested
Phantom2040
New Member
Re: Ben Affleck Batman Cowl from Dawn of Justice 3D print
You got me. I'm in for everything.
You got me. I'm in for everything.
TheRocketeer
Master Member
Re: Ben Affleck Batman Cowl from Dawn of Justice 3D print
Sounds good on the list.
Sounds good
on the list. 
TheRocketeer
Master Member
Re: Ben Affleck Batman Cowl from Dawn of Justice 3D print
OK they will be available after the initial run is done
OK they will be available after the initial run is done
TheRocketeer
Master Member
Re: Ben Affleck Batman Cowl from Dawn of Justice 3D print
Yes as I stated in the first post these are Work In Progress pictures. And everything will be as screen accurate as I can make them with the reference I have.
Yes as I stated in the first post these are Work In Progress pictures. And everything will be as screen accurate as I can make them with the reference I have.
TheRocketeer
Master Member
Re: Ben Affleck Batman Cowl from Dawn of Justice 3D print
Down for one of each
Down for one of each
I'm interested in a cowl and an emblem. Put me down for 1 each, please.
bolinmedia
Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
Definitely in for all three. Want to see the emblem with the detailing on it. Can't freaking wait!! I'll have a movie accurate suit in my short film 2 years before the actual film releases!!! Now I just have to find fabric that is stretchy-ish that's ribbed like the suit...
Definitely in for all three. Want to see the emblem with the detailing on it. Can't freaking wait!! I'll have a movie accurate suit in my short film 2 years before the actual film releases!!! Now I just have to find fabric that is stretchy-ish that's ribbed like the suit...
bolinmedia
Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
It just needs the crows feet in the corners of the eyes to be screen accurate I think
Maybe a slightly more peaked eyebrow arch?
It just needs the crows feet in the corners of the eyes to be screen accurate I think
Maybe a slightly more peaked eyebrow arch?
bolinmedia
Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
TheRocketeer
Master Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
This is not a build thread. Like I said. I will make as screen accurate as my abilities allow... If I put all the details...like crows feet and leather texture in the print it would be lost with primer/putty etc.... Please trust that I know what I'm doing.
This is not a build thread. Like I said. I will make as screen accurate as my abilities allow... If I put all the details...like crows feet and leather texture in the print it would be lost with primer/putty etc.... Please trust that I know what I'm doing.
bolinmedia
Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
I'm sorry. Didn't mean anything, just trying to help out.
sorry
I'm sorry. Didn't mean anything, just trying to help out.
sorry
TheRocketeer
Master Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
No problem just wait till you see some progress. then you can decide if it's gonna be accurate enough.
No problem
just wait till you see some progress. then you can decide if it's gonna be accurate enough.
bolinmedia
Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
Judging by the work of yours that I have seen, I have no doubt it will amaze! I can't wait personally. But I guess we all have to. Excellent work thus far for sure
Judging by the work of yours that I have seen, I have no doubt it will amaze! I can't wait personally. But I guess we all have to.
Excellent work thus far for sure
TheRocketeer
Master Member
Re: Batman V SupermanBen Affleck Batman Cowl (Dawn of Justice)
Funny you should ask... so I hit print and then I trimmed and primed the print so work has started.. and if you look there are crowsfeet.. just wasnt so obvious in the black render.
And yes this will have the leather texture and all the trimmings for all you good people here
Funny you should ask... so I hit print and then I trimmed and primed the print
so work has started.. and if you look there are crowsfeet.. just wasnt so obvious in the black render.And yes this will have the leather texture and all the trimmings for all you good people here
Judging by the work of yours that I have seen, I have no doubt it will amaze! I can't wait personally. But I guess we all have to.
