Page 4 of 4 FirstFirst 1234
Subscribe
  1. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    Jul 3, 2018, 7:29 PM - Re: Yes, another BTTF2 nike footwear bag build #76

    MitasTouch said: View Post
    They could be anything really. But i think what would look best would be the ends of pins you put in a cork board.
    https://images-na.ssl-images-amazon....AC_SL1500_.jpg
    Thats a pretty good guess. I do realize mine are too big so I plan on changing it later


    Sent from my iPhone using Tapatalk
  2. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    Jul 3, 2018, 7:32 PM - Re: Yes, another BTTF2 nike footwear bag build #77

    cavx said: View Post
    In high rez close up, these bumps are small and yellow. Almost like 3mm LEDs had been glued in from the inside panel.

    Maybe it is time for that dedicated thread.
    I think it is too! Definitely would hell to get more people to help out


    Sent from my iPhone using Tapatalk
  3. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    Jul 3, 2018, 7:38 PM - Re: Yes, another BTTF2 nike footwear bag build #78

    joshslayton said: View Post
    I think it is too! Definitely would hell to get more people to help out


    Sent from my iPhone using Tapatalk
    OK I will start it.

    And done.

    LINK
    Last edited by cavx; Jul 3, 2018 at 7:55 PM.
  4. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    Jul 9, 2018, 10:54 AM - Re: Yes, another BTTF2 nike footwear bag build #79

    Update:

    https://instagram.com/p/BlBCl_QggUF/

    Got around to mounting the end nozzles to the main body to see how it would function and it still needs a bit of work. Its not a practical design for a bag as its quite difficult to open and close in general. It also wants to buckle and twist on me but I have some ideas on how to fix that like reinforcing the main body from warping and figuring out a way better solution to mount the end nozzles.

    Im also casting more parts for more bags as now im afraid of ruining the prototype so making sure I have extras


    Sent from my iPhone using Tapatalk
  5. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    Jul 9, 2018, 8:18 PM - Re: Yes, another BTTF2 nike footwear bag build #80

    joshslayton said: View Post
    Update:

    https://instagram.com/p/BlBCl_QggUF/

    Got around to mounting the end nozzles to the main body to see how it would function and it still needs a bit of work. Its not a practical design for a bag as its quite difficult to open and close in general. It also wants to buckle and twist on me but I have some ideas on how to fix that like reinforcing the main body from warping and figuring out a way better solution to mount the end nozzles.

    Im also casting more parts for more bags as now im afraid of ruining the prototype so making sure I have extras


    Sent from my iPhone using Tapatalk
    Looking really good. I did notice how the lids slide a bit along the length. This is why I came up with the runner system I'll build into mine. It means the lids can't move in that direction and would still work even if an end cap falls off.
  6. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    Jul 10, 2018, 6:24 PM - Re: Yes, another BTTF2 nike footwear bag build #81

    cavx said: View Post
    Looking really good. I did notice how the lids slide a bit along the length. This is why I came up with the runner system I'll build into mine. It means the lids can't move in that direction and would still work even if an end cap falls off.
    Yeah, itís because the main body tends to warp when trying to move the sliding doors. I have to find a definitive way to mount the nozzles to the main body as in something low profile and sturdy enough


    Sent from my iPhone using Tapatalk
  7. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    Jul 12, 2018, 1:55 AM - Re: Yes, another BTTF2 nike footwear bag build #82

    joshslayton said: View Post
    Yeah, it’s because the main body tends to warp when trying to move the sliding doors. I have to find a definitive way to mount the nozzles to the main body as in something low profile and sturdy enough


    Sent from my iPhone using Tapatalk

    Are the end caps glued on yet?

    My lids don't slide because I made a small lip at 90 degrees to the end that is trimmed to fit just between the internal arches that they run on.
  8. Grenex's Avatar
    Member Since
    Apr 2013
    Messages
    142
    Jul 16, 2018, 6:58 AM - Re: Yes, another BTTF2 nike footwear bag build #83

    I'm in if you do a run! Looks great!!

    Sent from my SM-G965U1 using Tapatalk
  9. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    Jul 16, 2018, 12:34 PM - Re: Yes, another BTTF2 nike footwear bag build #84

    Grenex said: View Post
    I'm in if you do a run! Looks great!!

    Sent from my SM-G965U1 using Tapatalk
    I am doing a run!

    BTTF2 nike footwear bag
    https://r.tapatalk.com/shareLink?sha...8&share_type=t


    Sent from my iPhone using Tapatalk
  10. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    Jul 16, 2018, 6:58 PM - Re: Yes, another BTTF2 nike footwear bag build #85

    joshslayton said: View Post
    I am doing a run!

    BTTF2 nike footwear bag
    https://r.tapatalk.com/shareLink?sha...8&share_type=t


    Sent from my iPhone using Tapatalk
    I would hope so. You don't spend that much on molds and such for a one off.
  11. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    4 Weeks Ago  Jul 23, 2018, 12:25 PM - Re: Yes, another BTTF2 nike footwear bag build #86

    Finally time for an update.

    Pretty much been spending time tweaking the bag here and there to try to get the bag from buckling up and twisting or the sliding doors coming loose on the end nozzle. I added a strip of styrene at one end of both sliding doors to make the tolerances smaller.

    I also added magnets inside the handle so that when itís closed everything will kinda snap into place where itís supposed to be and I added a tiny styrene stopper to stop the sliding doors from sliding out of place



    Hereís a quick test video showing the functionality of the bag.
    https://instagram.com/p/BllQuDcFKWv/

    I think itís fully functional now! Now I can start cleaning all the parts up and get everything ready for paint!


    Sent from my iPhone using Tapatalk
  12. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    4 Weeks Ago  Jul 23, 2018, 6:10 PM - Re: Yes, another BTTF2 nike footwear bag build #87

    Looking good.

    That strip can come all the way to the runner. I ended cutting mine back and have a new thing done that does the same job, but also allows me to pop the lids in and out. This means that I can fuse the end caps to the body first, then slide and clip the lids in place.

    I'll post some images of how I did this in the official thread.
  13. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    3 Weeks Ago  Jul 30, 2018, 4:10 PM - Re: Yes, another BTTF2 nike footwear bag build #88

    Just a quick small update to show where itís at now.

    Giving it the ole spot putty treatment of cleaning up the casts and removing any imperfections. So just a few more passes of spot putty and filler then it will be ready for paint.

    One challenge is to figure out a way to actually paint these pieces. Iíll have to build each part theyíre own dedicated paint stands.









    Sent from my iPhone using Tapatalk
  14. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    3 Weeks Ago  Jul 30, 2018, 5:21 PM - Re: Yes, another BTTF2 nike footwear bag build #89

    When you get on to the production run, will you not be able to pigment the resin?
  15. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    3 Weeks Ago  Jul 30, 2018, 6:16 PM - Re: Yes, another BTTF2 nike footwear bag build #90

    cavx said: View Post
    When you get on to the production run, will you not be able to pigment the resin?
    I might be able to but even so I still would need to do some work to hide the seam lines


    Sent from my iPhone using Tapatalk
  16. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    2 Weeks Ago  Jul 31, 2018, 7:35 AM - Re: Yes, another BTTF2 nike footwear bag build #91

    joshslayton said: View Post
    I might be able to but even so I still would need to do some work to hide the seam lines


    Sent from my iPhone using Tapatalk
    Are you using polyester or polyurethane? I am guessing your resin is not clear like the stuff I was using?
  17. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    1 Week Ago  Aug 9, 2018, 8:44 PM - Re: Yes, another BTTF2 nike footwear bag build #92

    Okay BIG update now!

    Finally got around to painting all the pieces and painting the Nike logo and the ďFOOTWEARĒ letters. I first gave everything a few coats of a matte black. I will later go back and give everything a coat of 2k matte clear



    I used a silhouette to cut out the designs out of vinyl. I had to make my own Nike logo as one from google images just wasnít clean enough. Then onto painting the design.








    Iím loving the end results! Tomorrow Iíll give it a coat of 2k matte clear and then when it cures Iíll start glueing and assemble everything!





    Sent from my iPhone using Tapatalk
  18. Member Since
    May 2013
    From
    Los Angeles
    Messages
    52
    1 Week Ago  Aug 9, 2018, 8:56 PM - Re: Yes, another BTTF2 nike footwear bag build #93

    awesome work so far
  19. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    1 Week Ago  Aug 10, 2018, 4:17 AM - Re: Yes, another BTTF2 nike footwear bag build #94

    The yellow lettering so makes these tube bags. Looks great.

    Sent from my CPH1701 using Tapatalk
  20. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    1 Week Ago  Aug 11, 2018, 1:07 PM - Re: Yes, another BTTF2 nike footwear bag build #95

    The Nike bag paint is finished! Iím really happy with the results, it came out beautifully to me at least.









    Now all that is left to do is make the inside look pretty. Stay tuned!


    Sent from my iPhone using Tapatalk
  21. RPF Premium Member cavx's Avatar
    Member Since
    Oct 2011
    From
    Brisbane, Australia
    Messages
    12,260
    1 Week Ago  Aug 11, 2018, 7:12 PM - Re: Yes, another BTTF2 nike footwear bag build #96

    Looks great. What are you doing for the windows on the ends?

    Sent from my CPH1701 using Tapatalk
  22. RPF Premium Member EmmaInCandyland's Avatar
    Member Since
    Dec 2012
    From
    France & Scotland
    Messages
    4,808
    6 Days Ago  Aug 14, 2018, 6:51 AM - Re: Yes, another BTTF2 nike footwear bag build #97

    Looks good, but I think your end cap are a bit too thick ^^

    Click image for larger version. 

Name:	60323280-ee81-4e41-bdcf-3b7250d95ba1.jpg 
Views:	10 
Size:	65.7 KB 
ID:	836745Click image for larger version. 

Name:	f8bd9753-93d5-44a3-80ec-c4f06bb2eb1b.jpg 
Views:	13 
Size:	213.8 KB 
ID:	836746
  23. RPF Premium Member
    Member Since
    Nov 2012
    Messages
    291
    5 Days Ago  Aug 14, 2018, 10:08 PM - Re: Yes, another BTTF2 nike footwear bag build #98

    EmmaInCandyland said: View Post
    Looks good, but I think your end cap are a bit too thick ^^

    Click image for larger version. 

Name:	60323280-ee81-4e41-bdcf-3b7250d95ba1.jpg 
Views:	10 
Size:	65.7 KB 
ID:	836745Click image for larger version. 

Name:	f8bd9753-93d5-44a3-80ec-c4f06bb2eb1b.jpg 
Views:	13 
Size:	213.8 KB 
ID:	836746
    I notice that too. Looks like Iíll have to remake that part sometime in the future


    Sent from my iPhone using Tapatalk

Similar Threads

  1. The BTTF Nike Footwear Bag.
    Mcfly, Replica Props
    Replies: 46
    Last Post: Sep 21, 2015, 1:13 AM
  2. Replies: 9
    Last Post: Oct 16, 2012, 4:10 AM
  3. anyone have bttf2 Nike footwear bag?
    JLeezy23, Production Made Costumes and Props
    Replies: 9
    Last Post: Apr 21, 2011, 11:07 PM