What's on your workbench? (no Star Wars, Marvel or DC stuff)
- Thread starter moffeaton
- Start date
Re: What's on your workbench?
I've been making molds...
Lots of molds...
When I counted, it turns out I had 15 large-ish molds and 3 smaller molds in progress simultaneously. This is a new record for me. I burned through 12 gallons of silicone in 2 days!
Once I'm finally allowed to talk about this project, it's going to be pretty darned cool.
I've been making molds...
Lots of molds...
When I counted, it turns out I had 15 large-ish molds and 3 smaller molds in progress simultaneously. This is a new record for me. I burned through 12 gallons of silicone in 2 days!
Once I'm finally allowed to talk about this project, it's going to be pretty darned cool.
gyoung2993
Sr Member
Just started my posting on this project ......been slowly getting there ,but I am halfway now....coming along day by day.....
http://www.therpf.com/members/gyoun...omplete-dissasembly-alot-work-still-ahead.jpg
AND after that project ,is my long awaited arc reactor project ,had all this time until all the parts were gathered to build, almost there.......lol.......
http://www.therpf.com/members/gyoun...15573-laser-cut-parts-machined-parts-base.jpg
http://www.therpf.com/members/gyoun...omplete-dissasembly-alot-work-still-ahead.jpg
AND after that project ,is my long awaited arc reactor project ,had all this time until all the parts were gathered to build, almost there.......lol.......
http://www.therpf.com/members/gyoun...15573-laser-cut-parts-machined-parts-base.jpg
Last edited:
Delmustator
Sr Member
Been wanting to do a Capt. Mal pistola. But I actually want mine to fire live ammo.
Canobi
Sr Member
Re: What's on your workbench?
I promised I'd make my young padowan's some lightsabres a while back, so in between polishing the masters for my other project, I made a start on them
I've ordered EL tape for the blades as there is just enough room in the hilts for an inverter and batteries.
I promised I'd make my young padowan's some lightsabres a while back, so in between polishing the masters for my other project, I made a start on them
I've ordered EL tape for the blades as there is just enough room in the hilts for an inverter and batteries.
swissmom8873
Active Member
I am working on Meg Masters Necklace from Season 6-7, I got most of the components, I am teaching myself how to solder right now to make the framed pendant. And I am also going to learn how to cast resin, to make the buddha bead more opaque looking like glass.
Here is what I got so far and what she wears.
[/IMG]
here are the buddha beads I am going to cast from:
[/IMG]
Here is the metal plaque she wears and then the one I found.
[/IMG]
Input greatly appreciated.
Here is what I got so far and what she wears.
here are the buddha beads I am going to cast from:
Here is the metal plaque she wears and then the one I found.
Input greatly appreciated.
slave1pilot
Sr Member
Got something new on my workbench, but it isn't a prop
Re: What's on your workbench?
Oooh nice!! :love
Oooh nice!! :love
Got something new on my workbench, but it isn't a prop
Re: What's on your workbench?
Technically it is my kitchen counter, but here is $35 of rubber curing away.
Somewhere in there is a nosecone shaped block of balsa. When I get home from work I'll find out if I made a mold or a mess. The first half look good so I'm fairly confident. Famous last words?
This was MoldStar 30 just after I poured it, and even though MoldStar does not require it looking at that really makes me want to get a vacuum pump and chamber.
Technically it is my kitchen counter, but here is $35 of rubber curing away.
Somewhere in there is a nosecone shaped block of balsa. When I get home from work I'll find out if I made a mold or a mess. The first half look good so I'm fairly confident. Famous last words?
This was MoldStar 30 just after I poured it, and even though MoldStar does not require it looking at that really makes me want to get a vacuum pump and chamber.
Just finished my helmet motorization for ironman pep. Check out my video on YouTube
The Best Motorized Ironman Helmet Ever! - YouTube
The Best Motorized Ironman Helmet Ever! - YouTube
MetalMangler
New Member
BrianCoyDesign
New Member
Re: What's on your workbench?
All I can say is WOW!
Made a deal with a buddy.....
All the hard work is done. Just down to the details and I think I can handle that :lol
All I can say is WOW!
BrianCoyDesign
New Member
Namssorg
New Member
Re: What's on your workbench?
This just finally came OFF my workbench, after about a year. I feel like there are probably a lot of these on the forum, but it's my first real attempt at a prop replica, and I'm pretty happy with how everything turned out.
Full build thread is over at gbfans.
This just finally came OFF my workbench, after about a year. I feel like there are probably a lot of these on the forum, but it's my first real attempt at a prop replica, and I'm pretty happy with how everything turned out.
Full build thread is over at gbfans.
Re: What's on your workbench?
My second variation of this...
My second variation of this...
robkashikoi
New Member
Re: What's on your workbench?
I don't know if it is ever really completely off the workbench but I recently weathered it a little more. Seems like there is always something else to do on these.
I don't know if it is ever really completely off the workbench but I recently weathered it a little more. Seems like there is always something else to do on these.
boochieboy
Member
Re: What's on your workbench?
The green/brown areas are where I started adding some Bondo-Glass.
The green/brown areas are where I started adding some Bondo-Glass.
Last edited:
robkashikoi
New Member
Re: What's on your workbench?
I really need to learn how to do that.
The green/brown areas are where I started adding some Bondo-Glass.
I really need to learn how to do that.
Similar threads
