The Wand Company TOS Tricorder is coming!

[FANATICO]

Well I didnt really find it because it can be seen in the tear-down video, but he doesnt mention it, so heres a better look:



This is behind the 3 buttons/lights. He didnt remove this one and I dont blame him. I think to get it out you would need to separate the aluminum front from the plastic housing, and Im sure there held together with some double-sided tape or adhesive. Too much work to remove it just to see the whole thing IMO

Yeah … I agree, you’ve tore down as comfortably as your willing to go.

It sucks not being able to find the display module yet. Perhaps, one day….

The info gained from a pin2pin would help to know the assignment’s for software/firmware hacks (not my wheelhouse)

Of course this is your call….if you want to stop and start to reassemble that’s fine. You gave it the Ol reverse engineering try it’s much Appreciated!

You went further than the last two YouTube teardown guy’s….that’s gotta mean something.

We all learned along the way…perhaps not in our favor, but nevertheless……..Thank You!

It appears Wand wins for now….

What’s important is that your Tricorder works correctly right after the last screw is screwed…

 

[FANATICO]

Well I didnt really find it because it can be seen in the tear-down video, but he doesnt mention it, so heres a better look:



This is behind the 3 buttons/lights. He didnt remove this one and I dont blame him. I think to get it out you would need to separate the aluminum front from the plastic housing, and Im sure there held together with some double-sided tape or adhesive. Too much work to remove it just to see the whole thing IMO

Below is my Epiphany……..blind ambition for an unattainable goal……it hit me like a wall of bricks.

Can you see the dilemma of why a physical hardware hack to tap into the tric display is futile?

Let me know when you stop laughing…..

( )

 

[Leinads]

Just swap displays lol

 

[Leinads]

Below is my Epiphany……..blind ambition for an unattainable goal……it hit me like a wall of bricks.

Can you see the dilemma of why a physical hardware hack to tap into the tric display is futile?

View attachment 1957338

Let me know when you stop laughing…..

What dilemma are you seeing

 

[FANATICO]

What dilemma are you seeing

Give a few others to possibly reply…..

It’s a question of logic and deduction…keep staring and thinking….

 

[Leinads]

Wireless transmission to display

 

[2vix]

MY guess is how the hell am i going to get my display ribbon cable thru that opening

 

[Leinads]

View attachment 1957346

MY guess is how the hell am i going to get my display ribbon cable thru that opening

View attachment 1957347

 

[Leinads]

logic and deduction

The two things that are sorely lacking in this thread!

 

[FANATICO]

View attachment 1957346

MY guess is how the hell am i going to get my display ribbon cable thru that opening

View attachment 1957347

Besides needing access to route additional cables…..the hood may never rotate again….

 

[Leinads]

We will never get that 1/2 hour back
Strike that. Full hour. Hahaha!

 

[FANATICO]

We will never get that 1/2 hour back
Strike that. Full hour. Hahaha!

That leaves only a software/firmware hack through the USB-C…..

 

[2vix]

 

[FANATICO]

View attachment 1957358

Excellent!!!

For your continued mission ….you’ll have the opportunity to sift through all 3353 pages downloadable PDF of the ARM’s manufacturers FULL STM32H750 Reference Manual…found here …… RM0433 Reference manual.

Should you accept your mission, GOOD LUCK WITH THAT!!

Otherwise, I’d be thinking .. I hope I remember where all the screws go…hmmmm ..

 

[Simonized]

View attachment 1957346

MY guess is how the hell am i going to get my display ribbon cable thru that opening

View attachment 1957347

Dremmel, file ... angle grinder
C'mon ... admit it guys, we all went through our toolboxes in our minds searching for the most unnecessary overkill tools we have haha!