The Amazing Spider-man 2 - 3D Print Files/Pattern - FREE

[ANBUspidey]

So I don't know if anyone is using Shapeways or if this has already been mentioned but they have a Elasto Plastic option for their 3D printing. I used that option for the finger pads and button pads and as soon as I get them in I will let you guys know the results. Here is a video of what the plastic is like. Also thanks for the free files [MENTION] kenlandrum [/MENTION]

 

[dcutugno]

Revised the "Mask Only" file to match the New CMYK V.2 suit, thinner webbing, slightly darker bricks.
Available in the first post as usual...
View attachment 346906

enjoy!

Hi Ken, sorry to point out on a problem that i found it seems the webs aren't centered as in the original file, you can see the comparison i did; follow the lines from the mask center and they finish on two different position any comment?

 

[kenlandrum]

Hi Ken, sorry to point out on a problem that i found it seems the webs aren't centered as in the original file, you can see the comparison i did; follow the lines from the mask center and they finish on two different position any comment?
View attachment 347934

It's cool. The edges are not cut edges therefore they do not have to align perfectly... as long as the webbing is centered with the bricks vertically I think all will be good.

 

[kenlandrum]

So I don't know if anyone is using Shapeways or if this has already been mentioned but they have a Elasto Plastic option for their 3D printing. I used that option for the finger pads and button pads and as soon as I get them in I will let you guys know the results. Here is a video of what the plastic is like. Also thanks for the free files kenlandrum http://www.therpf.com/member.php?u=21957

http://youtu.be/bjNRgqAokiY

Sounds perfect for the pads! I wonder if it would be a good choice for the soles. Probably cost a fortune...

 

[WebHead101]

Hey guys has anyone else had problems uploading to FOD I went to upload my file and it would not upload can anyone help? Btw it was not kenlandrums file. Sorry if this is the wrong place...


All the best!
-Aaron

 

[ichidave]

not the right place .. you also did not leave enough info for anyone to answer your question . what file what was the file type you were trying to upload...

 

[JayAims]

So I don't know if anyone is using Shapeways or if this has already been mentioned but they have a Elasto Plastic option for their 3D printing. I used that option for the finger pads and button pads and as soon as I get them in I will let you guys know the results. Here is a video of what the plastic is like. Also thanks for the free files kenlandrum http://www.therpf.com/member.php?u=21957

http://youtu.be/bjNRgqAokiY

how much is that going to cost? because i have uploaded ken's sole.obj file (after i resized it) and its like $117...

 

[JayAims]

ok.. so for the soles I'm having an issue.. when i scale ken's sole.obj file to my size like i have shown below:

everything is sized correctly. but when i load up the file into shapeways it switches the dimensions around to this:

i've tried to resize the file in netfabb basic but when i take off the scaling ratio check box it messes up the model when i put everything how shapeways wants me to put it.
thus it results in a $117 single shoe sole.

any help would be greatly appreciated

 

[kenlandrum]

ok.. so for the soles I'm having an issue.. when i scale ken's sole.obj file to my size like i have shown below:
View attachment 348198
everything is sized correctly. but when i load up the file into shapeways it switches the dimensions around to this:
View attachment 348199
i've tried to resize the file in netfabb basic but when i take off the scaling ratio check box it messes up the model when i put everything how shapeways wants me to put it.
thus it results in a $117 single shoe sole.

any help would be greatly appreciated

when you upload to shapeways and it then asks what unit of measurement...mm, inches etc, keep trying different selections till you get on that works. I have found the when I upload to them I need to choose inches even though the model was built in mm.... Weird

 

[JayAims]

when you upload to shapeways and it then asks what unit of measurement...mm, inches etc, keep trying different selections till you get on that works. I have found the when I upload to them I need to choose inches even though the model was built in mm.... Weird

all of them keep at the same price still... if that is true a size 10 shoe sole is $117. WOW!

 

[spidey4ever]

Quick question, when I print the lenses and they eye frames; what materials do I use in Shapeways?
Like is Black Glossy Ceramics the one to use for the frames?

I don't want to sound incompetent, this is going to be my first one and I want it to look well.. Amazing

 

[kenlandrum]

all of them keep at the same price still... if that is true a size 10 shoe sole is $117. WOW!

I just resized the sole file to 30mm/12" and it was gonna cost $98.41 in plastic.... yes, I agree WOW. As in WOW what a rip.
There are other alternatives to Shapeways... have you tried a local college or asking around in the junkyard here?

 

[PhantomForge]

In photoshop, what measurement scale do you use to measure and resize the pattern?

 

[kenlandrum]

In photoshop, what measurement scale do you use to measure and resize the pattern?

In the "Search this thread" box type "Re-size"...should get you all you need to know.

 

[rfortin]

Hi Guys.. it's the second time i try to 3D print with shapways the Ken's file for the Finger pads and the palm pads shooter... but shapeways tell me they are to thick to print... do you know if i do something wrong... do you have OK file??? Need help rush!

Thanks

 

[kenlandrum]

Hi Guys.. it's the second time i try to 3D print with shapways the Ken's file for the Finger pads and the palm pads shooter... but shapeways tell me they are to thick to print... do you know if i do something wrong... do you have OK file??? Need help rush!

Thanks

I believe someone on here used Shapeways "Print Anyway" feature and what they were printing cam out just fine...
Try starting here: http://www.therpf.com/f78/amazing-s...dex58.html?highlight=print+anyway#post3333121

 

[rfortin]

thanks ken... but do you have a fingers pads thicker file?? they have only palm pads!

 

[kenlandrum]

thanks ken... but do you have a fingers pads thicker file?? they have only palm pads!

No, but I could make one.. I should probably update the file anyhow... you are not the first to mention its too thin

K

 

[rfortin]

If you can i really appreciate ... And all of the members too

 

[kenlandrum]

If you can i really appreciate ... And all of the members too

The file has been updated to 3mm thick.

Enjoy!