Done / Completed TASM2 Suit Kit *closed*

[kiyominai]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

So the webbing will be printed, but 2D? Sounds good to me.

I do apologize for not being able to offer 3D printing but it looks like my shop has been contracted.

I do recommend El Fett's services however. I loaned him my production glove piece that way he could update his webbing formula to better match the screen production webs in both dimension and color.

 

[RiotJavelinDX]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

I do apologize for not being able to offer 3D printing but it looks like my shop has been contracted.

I do recommend El Fett's services however. I loaned him my production glove piece that way he could update his webbing formula to better match the screen production webs in both dimension and color.

For sure, I prefer the puff paint method anyways. I think using puff paint with your fabric will look damn near perfect.

 

[ichidave]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

if you cannot do the screen printing of the webbing? you asre just giving blue lycra with the bricks and the red with the bricks only?

 

[kiyominai]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

if you cannot do the screen printing of the webbing? you asre just giving blue lycra with the bricks and the red with the bricks only?

The red parts will have the web pattern as well.

 

[isunk]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

The red parts will have the web pattern as well.

So since you have the production pieces, have you matched the brick patterns on the red fabric? As well as the web patterns from all the pieces?

 

[ichidave]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

he only has two pieces of production a hand and chest piece...

 

[kiyominai]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

So since you have the production pieces, have you matched the brick patterns on the red fabric? As well as the web patterns from all the pieces?

he only has two pieces of production a hand and chest piece...

isunk Yes I have.
ichidave. I actually now have all of them (including the blue). I just haven't taken a photo of all the pieces because I only have a phone camera.

 

[Lunaman]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

@isunk Yes I have.
@ichidave. I actually now have all of them (including the blue). I just haven't taken a photo of all the pieces because I only have a phone camera.

 

[RiotJavelinDX]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

So $950 for enough fabric for a whole suit?

 

[isunk]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

@isunk Yes I have.
@ichidave. I actually now have all of them (including the blue). I just haven't taken a photo of all the pieces because I only have a phone camera.

http://media.giphy.com/media/rq47PJe34Dj4k/giphy.gif

So $950 for enough fabric for a whole suit?

So you're saying...you have all the pieces...is...your pattern...THE pattern?

 

[kiyominai]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

So $950 for enough fabric for a whole suit?

So you're saying...you have all the pieces...is...your pattern...THE pattern?

@RiotJavelinDX Yes. All the red pieces will fit on 2 yards of fabric and the blue fabric will be on a 24 X 36 inch sheet (5 sheets) so all you'll have to do is trace out a pattern that matches your size and sew the pieces up.
@isunk I'm not saying it's not the pattern

Also for everyone else, the red pattern will be available in three sizes: Small, Medium, Large. It's a similar route to the SpideyPlanet kit.

 

[ichidave]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

how long before you put together a prototype suit so ppl can see what it would look like before buying a kit??

 

[kiyominai]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

how long before you put together a prototype suit so ppl can see what it would look like before buying a kit??

The pattern just has to be printed and sewn together now. I'm not sure if I can find a seamstress in time since I leave to work on Doctor Strange soon but I will have a partner of mine sew it while I'm gone.

 

[kiyominai]

Re: TASM2 - Screen Printed Suit UPDATE: Brick Printing Finalized*

Due to unforseen circumstances with machines being broken, this project will be halted.

I apologize for any inconvenience.

 

[kiyominai]

Re: TASM2 Suit Kit *Run now Resumes*

Back up and running folks. Thank you for your patience.

 

[ichidave]

Re: TASM2 Suit Kit *Run now Resumes*

look forward to seeing a prototype

 

[funkster]

Re: TASM2 Suit Kit *Run now Resumes*

Well as I have blue, be rude not to get the red.

Sent you a PM

 

[thejakemoore]

Re: TASM2 Suit Kit *Run now Resumes*

That acid dyed fabric is B-E-A-UTIFUL!

 

[RiotJavelinDX]

Re: TASM2 Suit Kit *Run now Resumes*

Wow. Completely missed this massive update. So, the red suit is patterned and seems easy to assemble, but the blue has no patterning for assembly?

 

[jarradfx]

Did anyone ever get around to sewing all the pieces together? I would love to see it in full force