Limited Run Studio Scale Y-wing - kitbashed castings - Part 2

[sjanish]

1/600 Otaki Yamato - 14 parts - $25

1/600 Mauretania - 4 parts - $6
1/500 Nichimo Hyuga - 2 parts - $5
1/72 Airfix Phantom - 3 parts - $5
1/12 Tamiya McClaren M23 - 6 parts - $10
1/16 Bandai Stug - 2 parts - $5
1/35 Tamiya Hanomag - 2 parts - $3
Singles - 6 parts - $9 set or $2 each
-- 1/76 Airfix Thunderstreak
-- 1/72 Airfix Focke Wulf
-- 1/72 Airfix Junkers Ju88
-- 1/130 Frog Shell Welder
-- 1/48 Bandai Shwimmwagen
-- 1/200 Nichimo U-boat Type IX-B - * see notes below

1/72 Hasegawa Sherman M3A4 - 10 parts - $12
1/76 Fujimi JagDPanther - 2 parts - $3
1/48 Tamiya Lancaster - 2 parts - $4
-- not pictured -gunner's bubble for Red Jammer - add $1 to the set price or $2 single
1/24 Airfix Hurricane - free if you bought Hurricane parts from my last set. ** see notes below

1/48 Bandai Panther G - 6 parts - $15
1/1200 Airfix Hood - 3 parts - $5
1/35 Tamiya Command Post car - 4 parts - $7
1/72 Handley Page - 2 parts - free *** - see notes below
1/48 Bandai King Tiger - 3(+1) parts - $7
-- 1/76 Fujimi Elephant part included ($2 if you only want the Elephant part)

These sets are for what I think are needed per Y-wing. If I have made a mistake on the number needed or have forgotten to include a part in a set let me know and I will try to make the numbers right or line things up in a future offering. The Otaki Yamato set does not include the gangway part that Studio Kitbash just ID'ed. I think that part is only used on Red Jammer, if you want it let me know and I will include it in the next mold I make.

I have done some cleanup on the pictured parts. The parts you receive will require clean up of flash and sprue.

I would rather not break up sets, but will on a couple of conditions. The minimum order is $10. Each single part will be $3. There are a couple of exceptions. I will break the Singles set for $2 each. At this time I do not plan on breaking up the Otaki Yamato set.

* The 1/200 Nichimo U-boat part will be cut in half. The Y-wing only requires half and that mold will not last long. Each half is $2 as a single part.

** 1/24 Hurricane - If you bought a set of Hurricane parts from me in my previous run I will send these along to you for free if you buy anything from this current offering or if you pay for shipping. If you want a full set of Hurricane parts email me. I can set you up, but those molds are wearing out and some of the parts will require extra work. If you just want these parts, not the full Hurricane set, the $3 singles pricing applies.

** Handley Page - I am not happy with how these turned out. I will offer a set of 2 for free, while supplies last, if you buy $10+ of other parts.

I can still make most of the parts from my previous Y offering. You can still search out my old thread for pictures. Let me know if you would like more information.

In the US I ship USPS Priority mail unless you want to ship via some other method. If you are outside of the US I will need your shipping address to get you a shipping quote.

Thanks

 

[Corellianexports]

I will take all of them.

 

[Lee S]

Are these still available?

 

[sjanish]

Are these still available?

I *think* I still have a couple sets, I will have to dig them out to be sure. If not I can dig out the molds and make more next time I am pouring resin.

 

[sjanish]

I looked through things and have just about everything pictured. Let me know what exactly you would be interested in.

I have also done another round of Y parts since then. Let me know if you see any you need. If I don't have it on hand I can still make all of these.

I haven't thought much about pricing. Should be similar to pricing above.

I also have lots of other parts from the following models: ESB AT-ST, Jedi Remote, TIE Bomber, Slave I, Skyhopper, Probe Droid, Probe Droid Pods, and Jedi Welder Droids.

These Handley Page grills are much better than my first attempt, but will still require some cleanup.

I have since molded the other part from the Shiden but haven't taken pictures.

Haven't figured out for sure which of the Matilda pieces get used, mold both.

I have a couple Centurion parts not pictured and one known part to still mold. If you are looking for something yet to be ID'ed on the Y look hard at the Centurion.