Screen Accurate Iron Man Parts
- Thread starter jackieisrockin
- Start date
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Haha i thought about it already but it seemed really difficult. Buy perhaps later on, ill do it
Haha i thought about it already but it seemed really difficult. Buy perhaps later on, ill do it
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Hey guys. I was asked to make iron man missiles of various suits so i decided to start with the little tiny forearm missles from the mark VI suit. Each one is about an inch and a half long but they were very difficult to model becuase of the tiny small details and it was also hard to get the proportions just right.
It is now in my shop and instead of having the option of printing it in red like the other pieces, i put up frosted ultra detail as an option. I recommend that one if you really want the little details to show up good since each one is very small and the details are even smaller.
Missile: View attachment 97494
Ref. pic: View attachment 97495
Thats it for now!
Hey guys. I was asked to make iron man missiles of various suits so i decided to start with the little tiny forearm missles from the mark VI suit. Each one is about an inch and a half long but they were very difficult to model becuase of the tiny small details and it was also hard to get the proportions just right.
It is now in my shop and instead of having the option of printing it in red like the other pieces, i put up frosted ultra detail as an option. I recommend that one if you really want the little details to show up good since each one is very small and the details are even smaller.
Missile: View attachment 97494
Ref. pic: View attachment 97495
Thats it for now!
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Hey everyone! Update! I finished the shoulder missile-pods for the mk II, III, IV and VI suits!
Here's the mk II and III missile pod: View attachment 97690
ref pic: View attachment 97691
and the mk IV and VI missile pod (the same as above but without the little things sticking out): View attachment 97689
ref pic:
More to come soon!
Hey everyone! Update! I finished the shoulder missile-pods for the mk II, III, IV and VI suits
!Here's the mk II and III missile pod: View attachment 97690
ref pic: View attachment 97691
and the mk IV and VI missile pod (the same as above but without the little things sticking out): View attachment 97689
ref pic:
More to come soon!
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Pretty big update today, everyone.
I literally had NOTHING to do all day today so i saw it as a chance to 3D model like crazy so i got to work.
I finished quite a lot for one day and its time to add them to my shapeways shop!
I did a forearm missile for the mk II/III, updated hip pod for mk IV/VI (more accurate), elbow and shoulder joints for mk II/III, and the joints for the boots (hero and CG) for mk II/III and IV/VI suits, which should fit into Zabana's wonderful boot model when scaled at 1.000000.
hip pod (my old one had circle holes. Looking at more pictures, i realized that the holes are rectangle):View attachment 97823
Ref. pic: View attachment 97824
Mk II/III elbow: View attachment 97822
Shoulder: View attachment 97819
Ref. pic: View attachment 97821
Boot joint (hero): View attachment 97815
Ref. pic: View attachment 97820
Boot joint (CGI): View attachment 97814
Ref. pics: View attachment 97817 View attachment 97816
And finally, the Mk II/III arm missile: View attachment 97818
Ref. pic: View attachment 97813
p.s. I had noticed that the hero version of the arm missile is quite different that the CG missile.
Hero: View attachment 97813
CG: View attachment 97825.
Does anyone, by chance, have ANY other pictures of the CG missile??? Thats the only one ive found and it, as you can see, barely gives off the shape of the missile let alone the details. If anyone has another picture(s) of it, that would help a lot for modeling reference and would also be greatly appreciated
Pretty big update today, everyone.
I literally had NOTHING to do all day today so i saw it as a chance to 3D model like crazy so i got to work.
I finished quite a lot for one day and its time to add them to my shapeways shop!
I did a forearm missile for the mk II/III, updated hip pod for mk IV/VI (more accurate), elbow and shoulder joints for mk II/III, and the joints for the boots (hero and CG) for mk II/III and IV/VI suits, which should fit into Zabana's wonderful boot model when scaled at 1.000000.
hip pod (my old one had circle holes. Looking at more pictures, i realized that the holes are rectangle):View attachment 97823
Ref. pic: View attachment 97824
Mk II/III elbow: View attachment 97822
Shoulder: View attachment 97819
Ref. pic: View attachment 97821
Boot joint (hero): View attachment 97815
Ref. pic: View attachment 97820
Boot joint (CGI): View attachment 97814
Ref. pics: View attachment 97817 View attachment 97816
And finally, the Mk II/III arm missile: View attachment 97818
Ref. pic: View attachment 97813
p.s. I had noticed that the hero version of the arm missile is quite different that the CG missile.
Hero: View attachment 97813
CG: View attachment 97825.
Does anyone, by chance, have ANY other pictures of the CG missile??? Thats the only one ive found and it, as you can see, barely gives off the shape of the missile let alone the details. If anyone has another picture(s) of it, that would help a lot for modeling reference and would also be greatly appreciated
Re: Iron Man Detail Pieces
Hey there! I've finished my cuts and I'm about to start putting my helmet together. Two pieces that might be nice to have for builders would be the "ears" and "teeth".
Hey there! I've finished my cuts and I'm about to start putting my helmet together. Two pieces that might be nice to have for builders would be the "ears" and "teeth".
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
I will work on that. Anybody interested in the same parts for War machine (teeth and ears)?
I will work on that. Anybody interested in the same parts for War machine (teeth and ears)?
Re: Iron Man Detail Pieces
There's already a seller on Shapeways selling the teeth if you're intertested
Iron Man Detail Kit by Dubean33 on Shapeways
He's a member here
Hey there! I've finished my cuts and I'm about to start putting my helmet together. Two pieces that might be nice to have for builders would be the "ears" and "teeth".
There's already a seller on Shapeways selling the teeth if you're intertested
Iron Man Detail Kit by Dubean33 on Shapeways
He's a member here
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Hey guys!
I took a break from 3D modeling for a few days to finish up my loki helmet and now that im done, i can get back to it!
I made an Iron Man and War Machine ear and a WM Shoulder joint.
IM Ear:
View attachment 98617
WM Ear:
View attachment 98619
Ref. Pic:
View attachment 98618
WM Shoulder:
View attachment 98620
Ref. Pic:
View attachment 98621
Thats all for now! Im trying to figure out a way to model the hands but ill give it a shot soon
More to come!
Hey guys!
I took a break from 3D modeling for a few days to finish up my loki helmet and now that im done, i can get back to it!
I made an Iron Man and War Machine ear and a WM Shoulder joint.
IM Ear:
View attachment 98617
WM Ear:
View attachment 98619
Ref. Pic:
View attachment 98618
WM Shoulder:
View attachment 98620
Ref. Pic:
View attachment 98621
Thats all for now! Im trying to figure out a way to model the hands but ill give it a shot soon
More to come!
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Thanks for the tip but i think ill have to make it completely from scratch because that hand doesnt look proportionate to a real human hand
Thanks for the tip
but i think ill have to make it completely from scratch because that hand doesnt look proportionate to a real human hand
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
That would be 50 kinds of awesome, considering I am pepping Zabana's hand right now.
They say the definition of insanity is doing the same thing over and over exepecting different results. I say it's trying to pep two hands and two boots from Zabana's pep files.
That would be 50 kinds of awesome, considering I am pepping Zabana's hand right now.
They say the definition of insanity is doing the same thing over and over exepecting different results. I say it's trying to pep two hands and two boots from Zabana's pep files.
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Ill work on it some more later on today and show some more pictures so you guys can see what it is
Ill work on it some more later on today and show some more pictures so you guys can see what it is
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Hey everyone little update.
Recently, someone had contacted me about the 3d printing part of my models. His thoughts, and this is just his opinion from his personal experience and i am are not trying to tell you what to buy or do, are that the White Strong & Flexible material is not the best thing to 3d print with.
According to him, its not very paintable, too brittle to wear, and not good for molding.
I am currently waiting on information about which material is good/better to 3d print with so if anyone is going to buy from my shapeways shop, i would suggest to wait a little bit until i get the right information. Once i am informed, i will add that material(s) to my models in my shapways shop, however i will still keep the White Strong & Flexible option up just in case anyone still likes to use that material to print with
Thats it for now!
Hey everyone little update.
Recently, someone had contacted me about the 3d printing part of my models. His thoughts, and this is just his opinion from his personal experience and i am are not trying to tell you what to buy or do, are that the White Strong & Flexible material is not the best thing to 3d print with.
According to him, its not very paintable, too brittle to wear, and not good for molding.
I am currently waiting on information about which material is good/better to 3d print with so if anyone is going to buy from my shapeways shop, i would suggest to wait a little bit until i get the right information. Once i am informed, i will add that material(s) to my models in my shapways shop, however i will still keep the White Strong & Flexible option up just in case anyone still likes to use that material to print with
Thats it for now!
Last edited:
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Hey guys!
I think i have something you've been wanting...
View attachment 98976 View attachment 98977
Its the upper palm!
I am currently working on the rest of the hand and once i am done, i will upload all of the parts to my shop and then ill start work on the fingers
I plan on making the lower palm connected to the knuckles part and have the "thumb guard" separate for, in theory, more thumb movability like this
View attachment 98980 View attachment 98981
Im working on the lower palm/ knuckles right now so i might be done with it in a day or two
More to come soon
Hey guys!
I think i have something you've been wanting
...View attachment 98976 View attachment 98977
Its the upper palm!
I am currently working on the rest of the hand and once i am done, i will upload all of the parts to my shop and then ill start work on the fingers
I plan on making the lower palm connected to the knuckles part and have the "thumb guard" separate for, in theory, more thumb movability like this
View attachment 98980 View attachment 98981
Im working on the lower palm/ knuckles right now so i might be done with it in a day or two
More to come soon
Re: Iron Man Detail Pieces
That is awesome. Any idea what we're looking at cost wise?
That is awesome. Any idea what we're looking at cost wise?
jackieisrockin
Well-Known Member
Re: Iron Man Detail Pieces
Well thats the thing. For some reason on 123d, it wouldnt allow me to hollow out the model so i had to do it all by hand. I got out as much plastic as i could but there is kind of alot left. With this piece (hopefully the hollowing feature works on the other parts) there is kind of alot of jagged shapes on the inside of the piece to where i dont think itll be wearable. In order to wear it, you would need to sand/ dremel the inside a little bit or mold it and cast it. However because it is a little big, im thinking probably about $33 for this upper palm part from shapeways.
Well thats the thing. For some reason on 123d, it wouldnt allow me to hollow out the model so i had to do it all by hand. I got out as much plastic as i could but there is kind of alot left. With this piece (hopefully the hollowing feature works on the other parts) there is kind of alot of jagged shapes on the inside of the piece to where i dont think itll be wearable. In order to wear it, you would need to sand/ dremel the inside a little bit or mold it and cast it. However because it is a little big, im thinking probably about $33 for this upper palm part from shapeways.
Similar threads
