Limited Run RUN CLOSED * DL-44 ESB Blaster Machined Parts Set * RUN CLOSED

[DakGibralter]

Hi everyone!

I've got an order in with the illustrious Boba Debt but sadly, because of my own (non-Boba) debt, I have to cancel my order. I've got a full set of Hoth parts on order:

Hoth Flash Hider (2 Knurled Bands)
Hoth Scope Bracket
Hoth Scope Bracket Disk
Hoth Scope Bracket Spacer
Accurized Denix Mauser with ESB Machine Work (Hoth)

So if you missed the boat on this run, my loss can be your gain. Send me a PM and I'll have the fine gentleman transfer my order to you.

Boba Debt has reminded me to remind you that my Mauser is still on order and still needs machining, so these will ship to you at the same time they were going to ship to me - which is to say, not quite yet.

Thanks!

 

[boochydog]

is it possible to still get the brass scope and pistons for this at this point, along with any of the added misc. options to the mauser? if so, i may be in for this.

Hi everyone!

I've got an order in with the illustrious Boba Debt but sadly, because of my own (non-Boba) debt, I have to cancel my order. I've got a full set of Hoth parts on order:

Hoth Flash Hider (2 Knurled Bands)
Hoth Scope Bracket
Hoth Scope Bracket Disk
Hoth Scope Bracket Spacer
Accurized Denix Mauser with ESB Machine Work (Hoth)

So if you missed the boat on this run, my loss can be your gain. Send me a PM and I'll have the fine gentleman transfer my order to you.

Boba Debt has reminded me to remind you that my Mauser is still on order and still needs machining, so these will ship to you at the same time they were going to ship to me - which is to say, not quite yet.

Thanks!

 

[DakGibralter]

is it possible to still get the brass scope and pistons for this at this point, along with any of the added misc. options to the mauser? if so, i may be in for this.

I had been planning to get them, but had not yet paid for them. Availability is a question for Mr. Boba Debt.

 

[boochydog]

ok then, put me down as buying into this contingent on being able to still get the brass scope and piston. i have tried to run through all the other options tonight but 41 pages is a lot. as long as i still have the other options still open to me to purchase into at this point, i will do this. perhaps we can confirm tomorrow and i can send payment to my new friend Mr. Boba Debt.

I had been planning to get them, but had not yet paid for them. Availability is a question for Mr. Boba Debt.

 

[Boba Debt]

I have 9 extra brass scopes but I can not sell them until all of them have been machined.

These are difficult to machine and if I pre-sold all 9 of the extra scopes and lost any during the machining process someone would be upset.

The scopes are the next item to get machined but the shop is swamped with mega orders so we are kind of the back burner at the moment. They are also having fixture issues that they need to resolve and that is a secondary reason for the delays.


BUT if you want a scope email me at bobadebt@ec.rr.com with your info and I will add you to the waiting list.



Subject Like - Replica Brass M-19 Scope

In the body please put the following info

RPF ID
Full Name
Address
Paypal email




Thanks

 

[boochydog]

Just to confirm, I can be put on the waiting list for both the scope and the piston set, correct? The previous response only mentioned the scope, but I am thinking your meant to say pistons when referring to the fixture issues. Hoping that's the case. I appreciate your working with us on this and as soon as this is confirmed, I wills end money via PP. Thanks.

 

[Boba Debt]

At this time I do not have any brass pistons

I am going to ash Vince to cast some black resin piston for those that missed out on the run

 

[boochydog]

OK, I will take this and take Dak's place. I will send payment tomorrow. Thanks.

At this time I do not have any brass pistons

I am going to ash Vince to cast some black resin piston for those that missed out on the run

 

[Hostamon]

OK, I will take this and take Dak's place. I will send payment tomorrow. Thanks.

Boochydog,
I ordered three sets of pistons but may end up only using one or two. PM me if you are interested and we will work out the details. I'd probably have BobaDebt mail me the part along with my order to keep things simple. I would then send the pistons on to you within a day or two.

 

[boochydog]

cool deal! that sounds like the easiest way as well. i will PM and we can set that up. i appreciate it!

Boochydog,
I ordered three sets of pistons but may end up only using one or two. PM me if you are interested and we will work out the details. I'd probably have BobaDebt mail me the part along with my order to keep things simple. I would then send the pistons on to you within a day or two.

 

[boochydog]

hey Dak, payment has been made to take your place for your Hoth blaster. I am now on this list with BD. BD, i will go through this thread to see what else I need to know for the future options and final purchase. Go ahead and add my e-mail to your group mailing list as well. I sent a WL request for the brass scope as well. Thanks!

ok then, put me down as buying into this contingent on being able to still get the brass scope and piston. i have tried to run through all the other options tonight but 41 pages is a lot. as long as i still have the other options still open to me to purchase into at this point, i will do this. perhaps we can confirm tomorrow and i can send payment to my new friend Mr. Boba Debt.

 

[boochydog]

Re: DL-44 ESB Blaster Machined Parts Set $100 JUNE 30 CUTOFF

feezle-nuts is it still possible to order these plaques from you? if so, i will take one for the hoth version. thanks!

Do you guys like this logo better? I think it would look cooler. Darker silver on bare silver usually pops.

http://i196.photobucket.com/albums/... Project Han ESB 2015 Blaster_zpssbhk2dsc.jpg

 

[Boba Debt]

Boochydog,
I ordered three sets of pistons but may end up only using one or two. PM me if you are interested and we will work out the details. I'd probably have BobaDebt mail me the part along with my order to keep things simple. I would then send the pistons on to you within a day or two.

I will be glad to remove 1 set of pistons from your order and add them to Boochydog to save on shipping.

I would just need an email from both of you for my records

 

[boochydog]

Works for me. Hostamon, does that work for you? I can send an e-mail from my end. Thanks!

I will be glad to remove 1 set of pistons from your order and add them to Boochydog to save on shipping.

I would just need an email from both of you for my records

 

[Hostamon]

Works for me. Hostamon, does that work for you? I can send an e-mail from my end. Thanks!

E-mail sent this morning. :thumbsup

 

[boochydog]

Sending e-mail now. Thanks!!

E-mail sent this morning. :thumbsup

 

[cjchiu]

Re: DL-44 ESB Blaster Machined Parts Set $100 JUNE 30 CUTOFF

feezle-nuts is it still possible to order these plaques from you? if so, i will take one for the hoth version. thanks!

I recently bought into the run as well. Feezle-Nuts says there should be no problems getting a plaque. I'd email him to let him know.

 

[boochydog]

Re: DL-44 ESB Blaster Machined Parts Set $100 JUNE 30 CUTOFF

hey, thanks. i will send him a PM.

I recently bought into the run as well. Feezle-Nuts says there should be no problems getting a plaque. I'd email him to let him know.

 

[Boba Debt]

The jig is complete and they have started machining the feet on the scopes.


They will work on the scope lens rings next and once they are done they can machine the ends of the scope for the lenses and lens rings.

It’s good to see some movement on this part of the project

 

[jontom]

I just want to give a shout out to Boba Debt for the great job he's doing managing this project and keeping us all informed. We're getting closer every day!

Thanks!