This is for a run of a 10 kits of my complete sound and lights kits for a Rocketeer Cirrus X3 Rocketpack.
***UPDATE** This kit is now being COMPLETELY REDESIGNED. The new kit will be smaller, Arduino-based, and MUCH MORE functional. READ THROUGH THE ENTIRE THREAD FOR UPDATES***
The heart of this kit is custom sound board that puts out the actual sound effects captured from the film. The board also triggers lights when a switch is depressed. Here's video of how it all works:
https://youtu.be/VGiWicQVhns
The kit comes with everything you need to have movie-accurate sound effects and bright LED light on your replica Rocketpack and super easy instructions.
Functionality of the kit is as follows:
On button push: Ignition sound ... followed by thrust ... lights go on. Thrust sound continues until you release the button
On button release: The engine wind-down sound, lights go out.
The Rocketeer Electronics Kit would include:
The kit is easy to install. No soldering on the main chip, it just clicks onto the chassis. Wires secure with screws. There will be limited basic soldering of speaker wires and switch wires.
Cost for the kit is $215 shipped in the US.
PM me for an international shipping quote.
Now accepting payment in full via Paypal to valorreplicas@gmail.com.
1) rocketeer25 (int)
2) DKnight23 (PAID)
3) venkman71 (int)
4) venkman71 (int)
5) Evolver79 (DEPOSIT)
6) jschlosser (PAID)
7)circa1964 (PAID)
8)nickfolkesstudio (int)
9)
10)
11)
12)
***UPDATE** This kit is now being COMPLETELY REDESIGNED. The new kit will be smaller, Arduino-based, and MUCH MORE functional. READ THROUGH THE ENTIRE THREAD FOR UPDATES***
The heart of this kit is custom sound board that puts out the actual sound effects captured from the film. The board also triggers lights when a switch is depressed. Here's video of how it all works:
https://youtu.be/VGiWicQVhns
The kit comes with everything you need to have movie-accurate sound effects and bright LED light on your replica Rocketpack and super easy instructions.
Functionality of the kit is as follows:
On button push: Ignition sound ... followed by thrust ... lights go on. Thrust sound continues until you release the button
On button release: The engine wind-down sound, lights go out.
The Rocketeer Electronics Kit would include:
- Custom Sound Module loaded with the sounds for ignition, thrust, wind-down
- A Screw Terminal to mount the sound Module to.
- A baseplate
- Momentary push button to start the lights and sounds (this can also be mounted to a Rocketeer glove)
- 80mm LED Light rings (2) for installation in the rocket bells.
- 4” speaker for installation in the center vent of the pack
- 5-wire cord for running to the push button
- Battery holder for 8 AA batteries (powers the lights)
- Battery holder for 2 AA batteries (powers the sound chip
- 22GA wire (enough to complete the system)
- Instructions for connecting the system together
The kit is easy to install. No soldering on the main chip, it just clicks onto the chassis. Wires secure with screws. There will be limited basic soldering of speaker wires and switch wires.
Cost for the kit is $215 shipped in the US.
PM me for an international shipping quote.
Now accepting payment in full via Paypal to valorreplicas@gmail.com.
1) rocketeer25 (int)
2) DKnight23 (PAID)
3) venkman71 (int)
4) venkman71 (int)
5) Evolver79 (DEPOSIT)
6) jschlosser (PAID)
7)circa1964 (PAID)
8)nickfolkesstudio (int)
9)
10)
11)
12)
Last edited by a moderator:
