Pulse Rifle 3d print Files, SPAS cage/Remington/clam shell shroud, racking etc,,

[Seananigans]

One question about the files, I don't see the spas cage or the internals for the rem trigger?

Thanks for the tip fella, I’ve emailed you the link and the missing files, I’ve also thrown you a few extra goodies.

 

[rorschach999]

Thanks for the tip fella, I’ve emailed you the link and the missing files, I’ve also thrown you a few extra goodies.

hi,

Any chance you can email me the missing files to Please,
Email in PM

 

[2keepandbear]

SO I have run into a little issue - 100% my fault, but In printing the upper receiver, the slot for the bolt handle got screwed up in printing. I printed the receiver with the top laying on the print bed and supports for only what touches the build plate (using cura). Just curious on what your settings are and/or how you print the receiver.

 

[Flip]

Thanks for the quick response and for the extras, the parts look awesome!!!!

 

[Seananigans]

Thanks for the quick response and for the extras, the parts look awesome!!!!

You’re welcome mate

 

[Seananigans]

New Mk3 shroud nearly ready for resin printing then mould making, it’s going to be cast in tough urethane resin, will come in both Aliens and Alien3 commando versions. Accepts a real spas12 heat shield and a real or Airsoft Thompson and my printed variants.
Recess for a metal plate(s) in the mag well for that metal on metal sound when the magazine is inserted.

 

[Flip]

Sorry I have another question. Do you know the size and type of screws used in the build? Also the L bracket do you use only half of it or do you layer them on top of each other?

 

[Seananigans]

Sorry I have another question. Do you know the size and type of screws used in the build? Also the L bracket do you use only half of it or do you layer them on top of each other?

Just buy a multi sized pack of hex button head bolts mate and pick out what fits, same with the springs...I think I used the brand Ronson off Amazon

 

[Seananigans]

SO I have run into a little issue - 100% my fault, but In printing the upper receiver, the slot for the bolt handle got screwed up in printing. I printed the receiver with the top laying on the print bed and supports for only what touches the build plate (using cura). Just curious on what your settings are and/or how you print the receiver.

Support set at 80, pla+ nozzle temperature 235, bed 60, same orientation in your pic with a brim.

 

[Mozzie]

damn missed the wetransfer link again, just expired

 

[Seananigans]

damn missed the wetransfer link again, just expired

damn missed the wetransfer link again, just expired

I’ll pop another link up this coming week mate

 

[Flip]

Sorry to bother, but I am having an issue with the MK2 Rem trigger, does it work with the Mk1 Rem assemble? I either have to push it into far so the slide doesn't get stuck under the hammer and then it doesn't snap forward because it is to wide to fit into the back of the rem assemble or to far back and the slide won't work with it? Do you have any pictures so I can see how the trigger is put together with the main body?

 

[Acidburn]

Hi sent you some coffee money via your PayPal for the files

 

[Punisher4u]

Excellent work. Any chance of reuploading the files?

 

[Kroenen77]

Wow looks great...is it possible to download the files?

 

[2keepandbear]

Hey! Finally getting around to properly printing these files on my Voron... the only issues I have is the Mk2 files I have don't have a two piece SPAS cage and my printer isn't big enough to accommodate the full cage. Any chance you have a two piece design for the spas cage?