Nike Mag V2 Mod Discussion (Page 58 Shopping List)
- Thread starter Taff83
- Start date
-
- Tags
- back to the future
- Status
nitrox
Sr Member
Yup the velcro came away from the strap on the very first use. Not to worry though as that can easily be repaired!
I just cant use that shell don't mean to sound snobby but i got to re do the whole thing i have one question WHERE CAN I FIND THE WHITE LACE ELASTIC STRIPS like the RD mags all i can find is standard //not the ones like markpoons lace elastic straps can anyone help.? i tried cloneprops but no answer he is the only one i have seen with the actual real ones and markpoons was super close. but as of now i cant find this missing peace so i cant put together my shells with out them im stuck.
Taff83
Sr Member
You want to do a search on eBay for "bra elastic" http://bit.ly/12m68XM something along these lines
FYI... everything else is ready to go from /Clear re done soles / cloneprops re molds . cups/ and ankle bubbles in A5 medium softness re fabrication new strong non wrinkle toe front/ shaved sole lower back/ new pop out L.E.D light casing new genuine wht leather /no Velcro sticthless uppers new paint...plus more...60 days is my expected time of complement
Taff83
Sr Member
My link was an example, when me and cloneprops were doing our builds we tried to source the exact elastic as the RD, I finally found a place in the UK that was exactly the same but I couldn't find it now.. Hopefully my example link above can set you on the right path to finding it, also I can't wait to see your finished mags 
Thanks guys for the extra push! Rome wasn't built in a day but when is was finished / it was Glorious / correction /a Spectacular Monumental peace of history. thats what im aiming for here so i cant let you down everything has to be A1 elite/ from the smallest detail to the biggest flaw im re doing it the right way ..i repeat the way they should of did it in the first place .. but were would all the fun be if it was done right the 1st time...... until next time guy all the best of luck on your builds .
airair
Sr Member
good job.
if you find any decent glue or adhesive to glue the fabric back to the grey soles that will be great as I havent had much luck so far!
need a strong glue for the fabric to grey soles, and something for the heel back to the grey soles.
Funny to say i had the same prob but i found that the less expensive works best funny right i used///// furniture super glue ////the little dollar store glue... it works and is good for everything//i put it in a squeez gule bottle with the thin tip / to seal and its good for the edge work for all corners///// and for the lower canvas i used contact cement brush stroke over lower sole then apply shell ///for the clear sole i used loctite all purpose G02 glue extra durable & versatile crystal clear.glue must have clamps to hold soles in place for attachment.
Do people out there still want led NIKE logo straps and uppers with tunge included all one color wht real leather like the RD.making the vinyl cut nike logos as we speak on my cricut. will post picks of finish work ////caption we have lift off.
http://cdn.solecollector.com/media/u/images/SC Mag 4.jpg
http://cdn.solecollector.com/media/u/images/SC Mag 4.jpg
Lucky 13
New Member
yes! my project has hit a stop at the moment due to the straps,, firstly the logos as a minimum and secondly the strap itself just seems too short in length to be worn without it being under alot of tension....
what exactly are you offering?...
nitrox
Sr Member
So today I finished up the toebox on both shoes and I'm really happy with how they came out. I used Loctite superglue to glue the fabric back in place and as I was unable to find the finishing glue Jedifyfe used I had to look for an alternative. In the end I found this stuff and it turned out great!
My EL sheet is available for pickup tomorrow so I'm going to pick that up and start on the straps tomorrow night.
When it comes to putting the EL in the soles I have a few questions:-
1. Do you guys have exact measurements of the halfmoon shapes for the EL sheet?
2. Where are you placing the inverter in the sole and are you ripping out the original blue LEDs or leaving them in place?
3. Where are you bringing the wires out from the sole?
Cheers,
Dan.
Sent from my GT-N7100 using Tapatalk
My EL sheet is available for pickup tomorrow so I'm going to pick that up and start on the straps tomorrow night.
When it comes to putting the EL in the soles I have a few questions:-
1. Do you guys have exact measurements of the halfmoon shapes for the EL sheet?
2. Where are you placing the inverter in the sole and are you ripping out the original blue LEDs or leaving them in place?
3. Where are you bringing the wires out from the sole?
Cheers,
Dan.
Sent from my GT-N7100 using Tapatalk
- Status
Similar threads
