-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run New Korbanth saber runs - LS6 reveal Gullwing and Crossguard 2.0 details inside
- Thread starter Korbanth
- Start date
andrew25rs
Well-Known Member
You are VERY correct. Escape while you still can! Haha jk have fun.
MoeSizzlac
Active Member
I believe the short answer is no...but you can build one yourself. I only have experience with the Color Spark 2 from Naigon and I know you can use that board for what you are describing. It has slots to add 6 LED's that can pulse or be constant on. I'm pretty sure other boards can do it too but I don't know which ones.
Last edited:
I just looked this up. Is this just a controller that you add your own leds to? I don't see much info on how to use it on their site.
andrew25rs
Well-Known Member
It's a complete Soundboard/Led Controller. If your planning on adding sound and light then this will be the heart of the system. Wire all the components to this and then all the settings can be adjusted on the included SD card.
I find their lack of documentation disturbing. Do you recommend it?
Sandtracker
Active Member
There's a manual for the Spark Color 2 that tells you how to wire it.
MoeSizzlac
Active Member
I would recommend it definitely. There is a learning curve but you can get results like this easily. This was my first build.
I've pretty much decided to build my own electronics drivers with arduino to cut costs. Where did you get that crystal chamber?
MoeSizzlac
Active Member
Built it from threaded rod and a whole bunch of parts. Nothing crazy. I documented it here if you want a more in depth look at what I did.
Sorry, I think I missed coming back to THE RPF and giving the link to the pre-orders that launched 2 weeks ago.
www.korbanth.com/2017
What I have are 3 sabers
1 - Crossguard 2.0 - a 3 bladed saber that is better and more correct than the 2015 crossguard 1.0 saber - has reveal features, straight side parts, and is 110% the size of previous and is much easier to get electronics/sound boards installed into - takes 1 inch main and 3/4 inch side blades - $250 - preorder - comes in hand Sept/October of this year
2 - LS6-Reveal-Gullwing - this cool new saber is really 2 sabers in 1 kit - you get the V1-Hero Activation box with light up green/red arrows, and the V2-V3 stunt clamp-activation box and alot of other parts so you can build the version you want, or buy 2 kits of the same and just make both versions - also takes 1 inch blade. The Gull wing refers to the bottom of the V1 hero clamp that has magnetic doors that "gullwing" open to reveal your own lit up green force crystal... $250 - Preorder -comes in hand Sept/Oct of this year.
3 - SID 2.0 - this re-released SID saber is 110% the size of 1.0 and has a much better more durable emitter...and I think just made better than the first version, but to own this one, you have to pre-purchase 2 of the sabers listed above, any combination from 1 of each to 2 of each of the same saber works...but I can only give away the SID 2.0 as a promotion for the purchase of 2 saber hilts.... about 40 FREE SID left still if you want to participate in the promo
Thank you
www.korbanth.com/2017
What I have are 3 sabers
1 - Crossguard 2.0 - a 3 bladed saber that is better and more correct than the 2015 crossguard 1.0 saber - has reveal features, straight side parts, and is 110% the size of previous and is much easier to get electronics/sound boards installed into - takes 1 inch main and 3/4 inch side blades - $250 - preorder - comes in hand Sept/October of this year
2 - LS6-Reveal-Gullwing - this cool new saber is really 2 sabers in 1 kit - you get the V1-Hero Activation box with light up green/red arrows, and the V2-V3 stunt clamp-activation box and alot of other parts so you can build the version you want, or buy 2 kits of the same and just make both versions - also takes 1 inch blade. The Gull wing refers to the bottom of the V1 hero clamp that has magnetic doors that "gullwing" open to reveal your own lit up green force crystal... $250 - Preorder -comes in hand Sept/Oct of this year.
3 - SID 2.0 - this re-released SID saber is 110% the size of 1.0 and has a much better more durable emitter...and I think just made better than the first version, but to own this one, you have to pre-purchase 2 of the sabers listed above, any combination from 1 of each to 2 of each of the same saber works...but I can only give away the SID 2.0 as a promotion for the purchase of 2 saber hilts.... about 40 FREE SID left still if you want to participate in the promo
Thank you
Sixth Element
Active Member
The renders are amazing. I hope the machinist can do these justice.
Don Mac.
Don Mac.
so far, the last few runs, the actual product looked just as good as the renders. Also the renders are files given to the China manufactoring plant, and actually have all the needed measurements that they feed into a computer and just create the parts from, so the renders are also the design files
. Anyone have the demension yet to design a chassis?
would it be a specific price if we buy 3 similar sabers, ex, 3 crossguard?
These sabers are still up for preorder - www.korbanth.com/2017 -
only 20 left of the free SID 2.0 saber (which you get for purchasing any combination of the 2 sabers, Crossguard 2.0 and LS6-REVEAL-GULLWING sabers)
email me if you have any questions on this - korbanth47@gmail.com
only 20 left of the free SID 2.0 saber (which you get for purchasing any combination of the 2 sabers, Crossguard 2.0 and LS6-REVEAL-GULLWING sabers)
email me if you have any questions on this - korbanth47@gmail.com
Similar threads
