Too Much Garlic
Master Member
Re: Metropolis 1/4 Maria Maschinenmensch figure
You could use something called putty primer to help cover that seam. Only spray on the area around the seam, and be sure to tape off intricate detail areas as it will fill those. Then you simply sand it slowly with a very high grit sandpaper until you reach the vinyl. Sand down as much as you can on the surrounding areas without sanding all the way down at the area where the seam is. You may have to do it a few times, prime, sand, prime, sand until you get a perfect result. Any sharp edges, then you need to give those areas extra attention to keep the details sharp.
You could use something called putty primer to help cover that seam. Only spray on the area around the seam, and be sure to tape off intricate detail areas as it will fill those. Then you simply sand it slowly with a very high grit sandpaper until you reach the vinyl. Sand down as much as you can on the surrounding areas without sanding all the way down at the area where the seam is. You may have to do it a few times, prime, sand, prime, sand until you get a perfect result. Any sharp edges, then you need to give those areas extra attention to keep the details sharp.