Limited Run LUKE ROTJ V2 empty saber run on IRA

[SolosHold]

http://imperialroyalarms.com/thread/5396/official-rotjv2-thread-solos-hold



This is the “Official” run thread for the ROTJ V2


Solo’s Hold Presents

“LIMITED EDITION EMPTY”

ROTJV2
Custom Collector saber

This Saber is designed to be the most install Friendly saber of it's Kind


Now is your chance to own a limited run, screen accurate saber that you can finish any way you wish. You will have complete control over who does the install on your saber, whether you choose to do it yourself, work with a recommended installer, or choose another installer; it is completely up to you.
THIS SABER IS DESIGNED TO USE THE TRI-CREE XPE2, and has integrated HEATSINK


<font color="#000000"><span style="font-family: Verdana">

There are 13 separate parts for this saber, more if you count all the fasteners and pieces I am not making.

The sabers will include the lever parts and the D ring, minus the Clamp, Chassis, and Clamp Card( or electronics) please see Group buy thread, and the Chassis will be available on Shapeways Store.
imperialroyalarms.com/thread/5397/graflex-clamp-slothfurnace-cards-thread


THE COST OF EACH SABER AS DESCRIBED is $282.00 + Paypal fee and Shipping, ( Priority Conus, and International will be Quoted at the time of project completion)



Non Refundable Deposit of 50% due at the time of Signing onto Run, Please Pay as Goods to SALES@SOLOSHOLD.COM via Paypal

Deposit Amount is $146.97, the remainder of the Balance is due at time of shipping and will have shipping quote added to it.

After the run closes, any extra sabers will not be at pre-order ( 30 day sign up) pricing.
After close Pricing is $370.00 + fees and shipping (based on location), Priority mail unless otherwise arranged.




Read more: http://imperialroyalarms.com/thread/5396/official-rotjv2-thread-solos-hold?page=16#ixzz3sVbaBEIV


Read more: http://imperialroyalarms.com/thread/5396/official-rotjv2-thread-solos-hold#ixzz3gonpLkcd


There are very few LIMITED extra sabers from the project left in addition to the Pre-Order (Early adopters).
When they are gone they are gone forever.
If you would like one of the Limited Edition Collector sabers you can email me at sales@soloshold.com
You can go here to the website and place your order if you are in the USA: http://soloshold.com/sabers.htm
For international orders please email me to get shipping costs.
I will post lots more media as these ship out to their owners
You are welcome to Contact the following installers to complete your saber: All are members here on the RPF, and are Armory / Consortium members of the Imperial Royal Arms.
Obi-Shane
https://www.facebook.com/Obi-Shane-7...14185/?fref=ts
GOTH 3Designs
https://www.facebook.com/goth3designs/?fref=ts
Scott juarez at
Crucible custom Props
https://www.facebook.com/cruciblecustoms/?fref=ts
Darth Alice Sabers
https://www.facebook.com/Darth-Alice-Sabers-1988977902780…/…
CSJ PROPS
https://www.facebook.com/CSJProps/?fref=ts
For installations instructions GO here:
http://goth-customsabers.ftl-network.com/log/diy-sh-luke-v2/
To get ROTJ clamp cards please contact
Slothfurnace
https://www.facebook.com/Slothfurnace/?fref=ts

For Graflex clamps Please contact
Romans Empire Props here:
http://www.romanprops.com/
For all the chassis Parts please go here:
http://imperialroyalarms.com/thread/...scrollTo=70798
http://www.shapeways.com/shops/goth-customsabers…

Thank you and May the force be with you, Always.
Solo

 

[Spirit of ob1]

Do you have pics on how the saber will come apart?

 

[SolosHold]

Highlighted are the threads, I am not showing everything, however you can see a MOCKUP electronics chassis, for all the PLector labs soundboards.


The bottom of the saber from the back of the clamp unscrews from the front section, the saber comes with 2 emitter fronts, 1 for display and another to install a blade.

The saber will have a chassis available for complete electronics installs.

The only parts that don't come with the sabers are the Graflex clamp, clamp card, and chassis will be availbe to order from 3d printer service.

There is also a switch solution for the sabers that will be available with the chassis.

 

[SolosHold]

Do you have pics on how the saber will come apart?

I am not revealing everything yet, but it will be fully installable, and have chassis available to install premium soundboards, and even comes with switches.

You can check the thread over there, I will try to keep this thread updated as well with information.

 

[Spirit of ob1]

Looks good! When is payment due

 

[majortom98]

Looks good! When is payment due

Not much time left. It will close soon. You will need to send your deposit if you want to get on the run

 

[SolosHold]

Yes, I am closing the run to start production over the next several days.

its been open for almost 3 weeks. I posted here after I knew that some other projects were wrapping up here. We have been working on this since February, and the thread on the IRA will have more posts from the other people that are collaborating with me on this. I will update stuff here, but to get all the info that other people post its best to follow the link to the OP on the IRA where the official run is taking place.

thanks, Solo

 

[SolosHold]

UPDATE, STAY TUNED. thanks SOLO

 

[SolosHold]

- - - Updated - - -



- - - Updated - - -

 

[SolosHold]

 

[LTsmash1200]

Damn. That looks awesome. Sorry I missed out on this run. Can't wait to see one finished and everything installed.

 

[SolosHold]

There are extra sabers available. Please see the run thread on the IRA in the link at top of page.

Full boogie coming up , thanks for your patience.

Solo & Co.

 

[SolosHold]

Prototype picture

 

[SolosHold]

ELECTRONICS CHASSIS ( will be available for all run members soon, and I will post a lot more information regarding the parts and where to get them)
Courtesy of Goth 3-Designs, who has collaborated on this project with us to make the best V2 possible.

 

[Spirit of ob1]

Coming out great!

 

[SolosHold]

Thanks, Courtesy of Co-Collaboration partner Goth 3-Designs for the V2 which will be available in multiple tiers, this is the UBER version for the Crystal Focus.




More to come we will be showing a fully working saber, along with lots of information regarding the chassis... thanks

 

[Romans Empire]

AWESOME work, Aaron! I need to comission someone to make me some awesome chassis for my OB1! DI'd you make those?

 

[SolosHold]

I work with a friend on these project, you should speak with Goth 3-designs. I have done some chassis over the years, but I am always in awe of Goths work and we have worked together on props for several years now.

You can contact him on his facebook, or on the IRA here :

https://www.facebook.com/goth3designs/?fref=ts


http://imperialroyalarms.com/board/85/3designs

 

[gyoung2993]

Remarkable

 

[SolosHold]