Kryro's Ironman 3 Helmets WIP - Silver Centurion Added

[Spardax]

Re: Kryro's Ironman Helmet Display - Thread

Mark 42 Progress:

This was technically my first pep build, as I learnt from a failed Mark 7 build.

View attachment 198132View attachment 198133View attachment 198134View attachment 198135View attachment 198136

Original pep, with coat of resin, few imperfections, and I wasn't happy with the ears so I made a new pair and left the back off, attaching the pictured part straight onto the helmet with the tabs

View attachment 198146

The cracks start to appear - Luckily this massive gap was sorted out by a single cut and bulldog clips

View attachment 198138View attachment 198139

I noticed some things that I didn't like on the original faceplate, such as the grooves above the eyes, and the air intakes at the top of the faceplate, so Faceplate mark 2 appeared.

View attachment 198137View attachment 198145

Side to side comparison before and after resin coat

View attachment 198140View attachment 198141View attachment 198143

Faceplate 2.0 on the helmet before resin. I am much happier with this new attachment. I do know the top of the helmet (air intake) is slightly wrong, but it doesn't bother me too much

View attachment 198144

After coat of fiberglass the helmet and 2nd faceplate lie in wait for the rest to catch up.

Great work
Recently i started to built this helmet from gimpee file, but at the end of the pep stage i had problem to position the faceplate, this tended to distort.
After a comparison with some image of the helmet from film wallpaper or scenes, i noticed that gimpee helmet has the chin a little too short.

 

[Kryro]

Re: Kryro's Ironman Helmet Display - Shotgun Added!


streetsoul - The button that looks like a .zip folder - you select that, and then just click on the 3D view which edges you want to combine.
Also a little preview of my semi-siplifed heartbreaker, im still not done with it. - I don't know how to turn these faces back to front though

Spardax - Yes I know what you mean, gimpee's file also misses the little indent at the top of the faceplate, but I can live with it. but don't give up, my best friend at that stage is a bulldog clip - there amazing.

 

[streetsoul]

Re: Kryro's Ironman Helmet Display - Shotgun Added!

View attachment 198851
@streetsoul - The button that looks like a .zip folder - you select that, and then just click on the 3D view which edges you want to combine.
Also a little preview of my semi-siplifed heartbreaker, im still not done with it. - I don't know how to turn these faces back to front though

right yeh i get ya buddy also thats what i was wanting to do is turn them faces round and join them if ya get me

 

[Ciano930]

Re: Kryro's Ironman Helmet Display - Shotgun Added!

@Ciano930 - It was just simplifying in Pepakura designer by joining edges that wernt already joined. Which is what im doing at the moment with the Heartbreaker. - I was just trying to make it a quicker build.

From what I remember about the godkiller, you could scale up the helmet and then pep the top half to use that as the mask over the mask, then maybe the extremis helmet scaled slightly smaller than the top mask

that's what the god killer is looking like in my mind, but ive only seen it a couple times

Well its a little more complex, imagine an iron man helmet with capt A's cowl fitted to the helmet, its more like that. but the similarities between godkiller and Gemini are in the jaw, they both have outward facing jaws where as the other armours are inward facing

 

[Kryro]

Re: Kryro's Ironman Helmet Display - Shotgun Added!

Small update: I Have started pepping what I believe to be the hardest pep file ive encountered in a while, but I simplified it dramatically.

Of course that would be the heartbreaker helmet file. - As it stands at the moment I have the faceplate and the top of the helmet pepped, will be starting the headband and sides later.

I will also be starting the Igor helmet today once I pop out to get some more card

 

[Kryro]

Re: Kryro's Ironman Helmet Display - Heartbreaker WIP added!

Mark 17 Progress:

No Exploded view this time folks sorry, there was too many parts in this pep. - This is still a WIP atm as I only started this morning but I have this already.





After joining the top together - looks sick


More updates soon

About half done, few pieces missing - and the faceplate is slightly crooked, but that will be fixed when the other side of the helmet is attached. The build will go slower now as I am very bust with college this week.



Thought id try it on - seems about right
This pep file is so hard, but I will persevere

UPDATE 23/06

Finished the top of the helmet, I decided to scrap the ears as the just wernt working for me, so im going to do an ear redux

Sorry for the masking tape - its just to cure my paranoia of the glue just not working after I go to sleep

Update 02/07

Finished pepping the back section of the helmet, and started on the chin section - ALMOST DONE!!!

Looking so good so far - thank you Parachristo for this wonderful file


The first part of the chin - this section was definitely one of (if not) the hardest pieces of the file. but I know the center of the chin will be the hardest, so ill leave that till last, shall try and do the other side of this tonight.


UPDATE 2.0

DID SOMEONE SAY... Almost done!!

Not by the hairs on my chinny chin chin

Finally it starts to resemble the Heartbreaker - All that needs to be done is the new ear sections, the middle piece of the chin and the 2 bottom rims of the chin section, then I can quickly resin it, as im am most scared of this pep coming out of place.


98% Completed - just need to make the new ears, and then I am DONE with the pep!!!

Here it is, mostly de-taped and oh my it looks sexy if I do say so myself

 

[streetsoul]

Re: Kryro's Ironman Helmet Display - Heartbreaker/Igor WIP added!

looking good bro keep it up

 

[Madosheet]

Re: Kryro's Ironman Helmet Display - Heartbreaker/Igor WIP added!

That's looking awesome so far! Can't wait to see how it looks when it's finished.
You're inspiring me to give the Heartbreaker a go!

 

[Kryro]

Re: Kryro's Ironman Helmet Display - Heartbreaker/Igor WIP added!

Thanks streetsoul and Madosheet

if parachristo ever gets back to me with the PW for the file I will send you my much simplified version
so far the heartbreaker has been alright, ive had to cut a few pieces on the headband because for some reason it didn't fit, but I can fi that at the bondo stage, or ill just put some paper over it lol

Updated the heartbreaker post with a few more updates

 

[Mdonci]

Re: Kryro's Ironman Helmet Display - Heartbreaker WIP added!

Hey, I like your helmets! Can you give me a link where can I find the Mark 37 helmet?

 

[Kryro]

Re: Kryro's Ironman Helmet Display - Heartbreaker WIP added!

Mdonci - unfortunately I don't think the guy who made it wanted to distribute it, or have people mass message him, so I wont be revealing his name.

I can say he did just unfold the low poly game model, of which balmung has uploaded a load. im sure there brilliant

 

[EnzoStark15]

Re: Kryro's Ironman Helmet Display - Thread

Awesome!

 

[Kryro]

Re: Kryro's Ironman Helmet Display - Heartbreaker WIP added!

EnzoStark15 thanks man
I've had to take a break until next week as I've got major college work to do this weekend

 

[Kryro]

Re: Kryro's Ironman Helmet Display - Heartbreaker WIP added!

Mark 38 Progress:

Hi guys, sorry for no updates, I've been away doing college work, but got back a few hours ago in the early morning and thought id whip this beauty up.
Due to no sleep and forgetfulness, I neglected to take any photos during the pepping stage. but anyway:

HERES MY BOY:




And here is a few shots of how it compares to the other helmets, size etc - think its about spot on.


I Will update after the resin stage

 

[Kryro]

Re: Kryro's Ironman Helmets WIP - IGOR added!

*Heartbreaker Updated - small*

 

[osvaldo5811]

Re: Kryro's Ironman Helmet Display - Thread

awesome and want to see your house party protocol
could you send me the file mark 37 hammerhead by personal message please is the only thing I need to complete my collection please

 

[Kryro]

Re: Kryro's Ironman Helmets WIP - IGOR added!

Unfortunately the file is not mine to give out, nor does the owner want to be swamped with email requests. sorry man, it is possible to point you in the direction of Balmung's 3D model from the game, which is what my helmet came from.

Heartbreaker pep 98% Completed!!!!! (Updated post)

 

[Program]

Re: Kryro's Ironman Helmets WIP - Heartbreaker 98% done

Kryro I did't think it was possible! Someone actually is building the most ridiculous Iron Man helmet I've very see...The Heartbreaker!
This deserves thumbsup Keep up the Awesome work!

 

[Kryro]

Re: Kryro's Ironman Helmets WIP - Heartbreaker 98% done

Kryro I did't think it was possible! Someone actually is building the most ridiculous Iron Man helmet I've very see...The Heartbreaker!
This deserves thumbsup Keep up the Awesome work!

Thank you very much, it now has a coat of fiberglass on the inside - I am still wondering how to do the ears, I may just cover them with a ectagle of card and fiberglass and then do the detail with body filler. it is the 2nd on my priority list for body filler after centurion.
But thank you, keep checking

Update very soon!

 

[Kryro]

Re: Kryro's Ironman Helmets WIP - Heartbreaker 98% done

Mark 33 Progress

Well ive had this file printed out ever since Balmung released it, but was put on hold due to heartbreaker.
Anyway this build is my scariest as I am resin-ing and fiberglassing the 3 pieces seperatly, HOPEFULLY the supports will keep it all cool.

And yes I have continued to use colours, as im bored of white card

The first part, the Chin


The Whole Helmet - slightly out on the back - easily fixed with body filler


The faceplate is now complete, looks beautiful


Checking the pieces are in line, makes me love this helmet SO much,


Sexy Centurion


Its strange how making all these helmets changes my opinion on which one is my favourite.
Anyway, as of now, the centurion has resin coat and the faceplate and chin have fiberglass in them. Hopefully when I fiberglass the helmet part it will still all fit perfectly *crosses fingers*