JURASSIC WORLD Owen Grady Costume
- Thread starter MartyMcPhly
- Start date
-
- Tags
- jurassic park
dansl
Jr Member
got my grey one delivered the other day, it's amazing quality! But yeah I ordered medium for a fitted fit but the arms are rather baggy (my arms are bigger than average for my size) not sure whether to go for small or to just get it tailored. So I second the sizing down :thumbsup
Thanks for the awesome tip on the belt. Went to an Orvis store near Boston today and picked one up. They seemed to have several of every common size, about 15 in all on the display.
jonnytrooper
Sr Member
Dansl, where have you seen smalls for sale? I wound up getting a medium but would love a small.
Here's our initial prototype for the Grady Henley:
We used a contrasting fabric for the front placket since we didn't have the fabric in stock. The final run will have the matching color. Also, the front buttons will be shifted to the left slightly as they should be centered between the placket edge and first vertical stitch, not centered on the entire placket.
Kind regards,
Magnoli
We used a contrasting fabric for the front placket since we didn't have the fabric in stock. The final run will have the matching color. Also, the front buttons will be shifted to the left slightly as they should be centered between the placket edge and first vertical stitch, not centered on the entire placket.
Kind regards,
Magnoli
dansl
Jr Member
When I originally ordered the medium, small was available but checking after I received it, they had run out of stock :unsure, looks like I'm getting mine altered!
jonnytrooper
Sr Member
Check it out guys! Here's the grey Orvis shirt:
First - slightly overexposed in direct sunlight, subtle filter added
Second - indirect sunlight
Third - indoors with filter added
He sure likes color-changing clothes!
First - slightly overexposed in direct sunlight, subtle filter added
Second - indirect sunlight
Third - indoors with filter added
He sure likes color-changing clothes!
Last edited:
chuck2003
Well-Known Member
Looks good! count me in for one
We'll be starting on our vest shortly. I finally found some good shots of the back to confirm seams, strap placement and buckle type.
TK9336
Active Member
Johnny trooper just wanted to say your posts have been on point. Since Dragon*Con is just around the corner I pulled the trigger on the Jacket Maker Vest. Also thanks to keen posters I canceled my Orvis shirt Large and instead am ordering a medium from the store in Chicago along with the "secret sku store only" belt. I went with the chocolate Eastlands too. This thread has been a real LIFESAVER. Also...wallet emptier.
The only thing I am on the fence with are the J Brand Kane versus the cheaper Dillards. I feel like just going full retard considering everything I got.
I swear this site has ruined me. (But hey! If I ever go to the zoo I now have a funny outfit...)
Edit: I went with the J Brand Kane Industrial based on the unique stitching on the fly/crotch of the pants that matches the screen used pants. I didn't get a sweet price like Johnnytrooper but you can get 10% off and free shipping if you order from J Brand directly.
The only thing I am on the fence with are the J Brand Kane versus the cheaper Dillards. I feel like just going full retard considering everything I got.
I swear this site has ruined me. (But hey! If I ever go to the zoo I now have a funny outfit...)
Edit: I went with the J Brand Kane Industrial based on the unique stitching on the fly/crotch of the pants that matches the screen used pants. I didn't get a sweet price like Johnnytrooper but you can get 10% off and free shipping if you order from J Brand directly.
Last edited:
jonnytrooper
Sr Member
Thank you for the kind words, TK9336! I think you'll be happy with the J Brand's. They really feel like the real deal when you put them on. 
Post pics when you have the getup!
Post pics when you have the getup!
dansl
Jr Member
Right, eastlands, henley, jbrands and now the orvis belt all on their way!! hope they get here in time!! For anyone in the UK, it's the same situation as the US for the belts, call up give them code 2c7c and the size and they can tell you the store to order from, 45+7.50 express shipping.
jonnytrooper
Sr Member
Where did you wind up getting the henley from?
Last edited:
DL Rebecca
New Member
I'm so sorry to hear this!! I hope the guy is caught, and forced to return the money he took. :-/ Also, sorry for the full quoting, but with the edit I wanted to be sure people knew what I was referencing. Our site is www.dlwtn.com, for those looking, and each piece we make is numbered and comes with a certificate of authenticity. We were sad that they didn't end up using our belt, but it was very cool to see the pieces they did use.
Rebecca Badurina
Dragon Leatherworks
Last edited by a moderator:
dansl
Jr Member
DL Rebecca hey! Just a quick question is there no way at all you can supply to the UK?
Last edited by a moderator:
dansl
Jr Member
well I thought I'd try my luck going direct to homespun, they don't deal direct with consumers but they were awesome in helping me out this one time, they basically had the coal miner with a little mark on it so couldn't sell it before and have had since they manufactured it so I agreed to buy it at a reduced cost, was very lucky they had anything at all, it's a large but depending on how it comes will probably get it altered so it's a fitted fit.
jonnytrooper
Sr Member
Well done! Let me know if you ever get sick of it!
augofett
Sr Member
Just recieved a mail from Dennis that I´ll post here.
"Hi Pablo,
I was reading the thread on the RP forum, and I saw where someone was
scammed (see page 2, bottom of the page) by a company claiming to be me.
Would you be so kind as to mention on the thread that all of the genuine
stuff that comes from me has a Certificate of Authenticity (so that
people know they are getting the real thing, not a expensive fake) AND
has a serial number that I keep on file with the original owners name.
I do this for both the knife sheath and Leatherman holder. Yours is
Leatherman Holder # 011. The first four were the originals that went to
the movie set, and you are the owner of #011."
By the way, he is very nice person to deal with
"Hi Pablo,
I was reading the thread on the RP forum, and I saw where someone was
scammed (see page 2, bottom of the page) by a company claiming to be me.
Would you be so kind as to mention on the thread that all of the genuine
stuff that comes from me has a Certificate of Authenticity (so that
people know they are getting the real thing, not a expensive fake) AND
has a serial number that I keep on file with the original owners name.
I do this for both the knife sheath and Leatherman holder. Yours is
Leatherman Holder # 011. The first four were the originals that went to
the movie set, and you are the owner of #011."
By the way, he is very nice person to deal with
Last edited by a moderator:
Hello folks,
Dennis from Dragon Leatherworks here. You've all met my better half, Rebecca, who has posted here.
I'm going to keep this short and sweet, because I don't want to run afoul of guidelines on the forum being a vendor and all.
First.. @Joker31, I'm sorry to hear that you got taken by someone posing as me. That sucks, and I hope that you can track the guy down and get your money back.
@dansl...we're working on it. We are, literally, a mom-and-pop operation. Its just me and DL Rebecca. I do the leatherworking, we share the minding of the store, and she does the marketing.
Thats it.
We've never had requests from foreign countries, and are new to import/export laws. Given that we also deal in exotic leathers (like, animals that could be on an endangered list in other countries) I have to learn the ins-and-outs of how to follow all the customs laws. It takes time to learn, and we can't afford to hire a lawyer to do it for us.
I'm doing all I can to see what it would take to open up shipping to other countries. But each country is different, there are individual rules to follow that differ from one country to the next, and learning it all is alot of work, and time consuming. We'll keep folk posted here as soon as we know what we can do, and how to do it.
Warmest Regards to all here, and a huge Thank You from both myself and Rebecca. The response to our work for the movie has been overwhelming, and I'm truly humbled.
sincerely,
Dennis aka: Dragon
Dragon Leatherworks.
Dennis from Dragon Leatherworks here. You've all met my better half, Rebecca, who has posted here.
I'm going to keep this short and sweet, because I don't want to run afoul of guidelines on the forum being a vendor and all.
First.. @Joker31, I'm sorry to hear that you got taken by someone posing as me. That sucks, and I hope that you can track the guy down and get your money back.
@dansl...we're working on it. We are, literally, a mom-and-pop operation. Its just me and DL Rebecca. I do the leatherworking, we share the minding of the store, and she does the marketing.
Thats it.
We've never had requests from foreign countries, and are new to import/export laws. Given that we also deal in exotic leathers (like, animals that could be on an endangered list in other countries) I have to learn the ins-and-outs of how to follow all the customs laws. It takes time to learn, and we can't afford to hire a lawyer to do it for us.
I'm doing all I can to see what it would take to open up shipping to other countries. But each country is different, there are individual rules to follow that differ from one country to the next, and learning it all is alot of work, and time consuming. We'll keep folk posted here as soon as we know what we can do, and how to do it.
Warmest Regards to all here, and a huge Thank You from both myself and Rebecca. The response to our work for the movie has been overwhelming, and I'm truly humbled.
sincerely,
Dennis aka: Dragon
Dragon Leatherworks.
Last edited:
