I decided to fix the portcullis on with screws . I got some m5 allen headed set screws from a supplier I pass on my way to work , they`re stainless and match the upholstery pins nicely .
After using masking tape to protect the helmet , I taped the visor over the helmet and into the position I decided looked best . Then I drilled (gulp) holes into the helmet through the visor .
Removing the visor I then opened out the holes and used a thread tap to cut an m5 thread into the helmet shell .
Once all the masking tape was removed , and the dust wiped away , the portcullis was screwed into its final postition .
Whew ... FINISHED !!!!!!!!!!!!!!!!!!!!!!
Here it is on my temporary display , this is how it will appear at the SF Weekender event 1/2 march.
After the event this weekend , I intend to re-do the display in time for the RPF prop party show season that is fast approaching here in the UK .
My intention is to make a correct looking comic book Judge Death head for the helmet to sit upon . Wish me luck ......................