Jackieisrockin's IM3 Iron Patriot Pepakura Files! V2 files coming soon!

[ladman]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

definitely use the measure between two points. you can do this for each part to make sure it fits you correctly. leave some room for movement. Like Jackie said before, just make sure if you scale the parts individually, make sure you scale the same parts in the same area,

Upper Torso, Lower Torso, Neck, Hip Plates = same scale

Thigh, Shin, Boot = same scale

Bicep, Forearm, Elbow, Handplate = same scale

 

[rogue9607]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

Bicep, Forearm, Elbow, Handplate = same scale

Have the elbow and handplate files been updated? When I was working with them, those two pieces seemed to have a different scale from everything else... unless I was doing something completely wrong. (which is definitely a possibility)

 

[Tiefschwarz]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

Ok IM Nation and ladman. Just tried it out with the otion to "import file" in pep designer and it looks good with the measuring tool!

Thanks for the support and the fast answers guys!

 

[ksanz]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

Lmao.....so everything but the shoulder had to be the same scale...

I think what they meant is that the scale should be consistent between the parts in each group. But could differ between groups. For example, the Chest and Abs could be 391 but the forearms and biceps could be 375.

 

[laellee]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

I think what they meant is that the scale should be consistent between the parts in each group. But could differ between groups. For example, the Chest and Abs could be 391 but the forearms and biceps could be 375.

That's EXACTLY right. And the shoulder bells could be 385 if you wanted. It's kinda nice that the bells are independent, because you can adjust their size to make the proportions between say a bigger torso and a smaller bicep look better. :thumbsup

 

[tkupka]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

Really sweet work! This may be my first suit build. Thanks for all the work!

 

[jackieisrockin]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

P4r4dox86- It looks great good job!

rogue9607- No not yet I will update them after the movie comes out

tkupka- Thank you very much!

 

[ksanz]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

I know its a little off the topic of the costume, but to keep me motivated to finish and to keep this on my mind I changed my desktop around a bit (Made the background myself)

 

[Yarooon]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

I know its a little off the topic of the costume, but to keep me motivated to finish and to keep this on my mind I changed my desktop around a bit (Made the background myself)

Nice !!!

 

[MMd]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

Someone can send me the STL files of the Iron Patriot armor?

 

[ladman]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

its getting down to the wire for me. I still have to finish painting, assemble and mount the cannon, build one more hand, put in the eyes, arc reactor, and repulsar hands, and oh yeah all this has to be done in the next 17 hours!!!!!!!!!!!!!!!!!!!!

 

[P4r4dox86]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

its getting down to the wire for me. I still have to finish painting, assemble and mount the cannon, build one more hand, put in the eyes, arc reactor, and repulsar hands, and oh yeah all this has to be done in the next 17 hours!!!!!!!!!!!!!!!!!!!!

Goodluck bro!

 

[jackieisrockin]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

ksanz- That might be one of the coolest computer desktops ive ever seen :cool Any chance of a tutorial :lol?

Ladman- Were all looking forward to the end result! opcorn

 

[Irongatsu]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

definitely use the measure between two points. you can do this for each part to make sure it fits you correctly. leave some room for movement. Like Jackie said before, just make sure if you scale the parts individually, make sure you scale the same parts in the same area,

Upper Torso, Lower Torso, Neck, Hip Plates = same scale

Thigh, Shin, Boot = same scale

Bicep, Forearm, Elbow, Handplate = same scale

I have to make a small clarification, maybe I'm the only one who has done the patriot fiberglass (I still have to paint).
The thigh can be in a different scale than the shin, but the arm (shoulder, biceps and forearm) should be all the same scale. The bust is preferable to the scale of the arm, but if you can it is important to put all the pieces of the same scale as written Ladman (upper torso, lower torso and hip plate).

 

[streetsoul]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

ok guys so im gunna start a new thread soon for my ip build , and was woundering can anyone help me with a little problem now , i will admit i am absolutly rubbish with scaling and was wanting someone to help me scale my files perfectly for my size , now it will be a pep build which i hope will turn out as awsome as iron gatsu's build , * high five for that by the way buddy * so if anyone can help please either inbox me or what ever is best for you lol now im a realy realy big iron man fan and like i said to jackie im wanting my own hall of armor with as many suits as i can build at a time lol i no alot of work but gunna be epic , so at the min i have to full suit models one with a helmet and no handlplate and boot and under armor foam edits and i have another with everthing but a helpmet lol so my question is can some one do me a full full suit model and maybe help me with scaleing and again i really want to do these files justice aswell as the mk47 when jackie finishes them (no rush though jackie) and if you would like you can look at my thread for my mk 7 and you can see the quality im hopeing to get with these also . any help would be greatly appreciated and who ever helps me will get appreciation and props in in my thread

 

[laellee]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

I have to make a small clarification, maybe I'm the only one who has done the patriot fiberglass (I still have to paint).
The thigh can be in a different scale than the shin, but the arm (shoulder, biceps and forearm) should be all the same scale. The bust is preferable to the scale of the arm, but if you can it is important to put all the pieces of the same scale as written Ladman (upper torso, lower torso and hip plate).

Nope you're not the only one. I have 2 now (1 too many) made in pep
I was able to make one thigh slightly larger scale than the shin on a leg, but if I'd have modified the scale much more they wouldn't have fit together well. I pepped all of my parts first and test-fitted them before even resining.

 

[streetsoul]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

Nope you're not the only one. I have 2 now (1 too many) made in pep
I was able to make one thigh slightly larger scale than the shin on a leg, but if I'd have modified the scale much more they wouldn't have fit together well. I pepped all of my parts first and test-fitted them before even resining.

yeh i remember the pics you posted its looking good buddy any chance you could help me with scaling mine please and the ultron is looking awsome buddy

 

[laellee]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

yeh i remember the pics you posted its looking good buddy any chance you could help me with scaling mine please and the ultron is looking awsome buddy

It sounds like you want to scale off of a full suit model? All of Jackie's main suit pieces can be assembled in pepakura by importing them (pic below), and then you can use point-to-point measurements to estimate the size.

 

[streetsoul]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

It sounds like you want to scale off of a full suit model? All of Jackie's main suit pieces can be assembled in pepakura by importing them (pic below), and then you can use point-to-point measurements to estimate the size.

yeh was wanting to do that lol erm but with a boot im hoping to start a new thread once ive scaled my suit so that i can start this whilst doin my mk7 too

 

[laellee]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Check out page 66!

yeh was wanting to do that lol erm but with a boot im hoping to start a new thread once ive scaled my suit so that i can start this whilst doin my mk7 too

Yep the boot will import in the correct place too.