Jackieisrockin's IM3 Iron Patriot Pepakura Files! V2 files coming soon!

[Don Juan]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Great! Youll have more time to finish your war machine suit also :love which will be awesome. But dont worry everyone. I will definitely come back with a new set of more accurate IP files . If any of the files i already made happen to already be accurate, then there will be no need to remake them (unless people request it).
I think ill wait until the movie comes out to remodel certain parts, just to know how everything functions in the movie, so i can model the new files to function accurately in real life :thumbsup. But until then, we must wait :unsure.
However, i started working on something last night that i think you all will like

Lol...i was going to take it too movie premier...but hopefully wee get more leaked pictures out there...but at this rate i won't finish till iron man 4..lol.

Just a question..on the boot you only have the foam version.or did i miss something?

 

[jackieisrockin]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Lol...i was going to take it too movie premier...but hopefully wee get more leaked pictures out there...but at this rate i won't finish till iron man 4..lol.

Just a question..on the boot you only have the foam version.or did i miss something?

IronLeoMan is currently unfolding the boot for normal pep

 

[Murdoch]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Hey guys looking at the scale. I'm at 68.5 in. now it says to go slightly bigger now on the chart the next size up would be 68.93=392.733585 now by following this do i enter this number for every piece? I apologize as i am just learning all of this but thanx in advance. You guys here have put in a lot of time and effort into this and for a newbie like myself these threads are like gold. Thanx everyone for everthing...GM

 

[AH studio]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Thank you guys! I'll definatelly donate some. God Bless!

 

[peruski]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

However, i started working on something last night that i think you all will like

Go on.... opcorn

 

[Don Juan]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

IronLeoMan is currently unfolding the boot for normal pep

ok thanks thought i missed it..

Go on.... opcorn

lol...yes go on...

 

[jackieisrockin]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Ill put some pics up when this part im working on is finished and ill release it when its all done

 

[iamking]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Inner Armor added

Yup, but I'm not happy with it though. Need a better coating method, plus it's bend slightly.

You may notice I got the decals ! Those i'm pretty happy with them.

By the way, these new hot toys pics are great ! Very helpful !

thanks dude. i get the idea now.

how did u make those awesome decals?

 

[ladman]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Great! Youll have more time to finish your war machine suit also :love which will be awesome. But dont worry everyone. I will definitely come back with a new set of more accurate IP files . If any of the files i already made happen to already be accurate, then there will be no need to remake them (unless people request it).
I think ill wait until the movie comes out to remodel certain parts, just to know how everything functions in the movie, so i can model the new files to function accurately in real life :thumbsup. But until then, we must wait :unsure.
However, i started working on something last night that i think you all will like

I like suprises:love

 

[gaiatron]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

with all your builds almost finished and mine hasnt hit anything as of now, im gonna jump to a high building to end it all.

 

[Irongatsu]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

last night, I reshaped the pep, the foot of IP ... I have already printed the left, here is the right one. I made ​​some changes in order to cut few pieces as possible ... is a little help to facilitate the creation to IronLeoMan

 

[ladman]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Finally finished creating the hands and fingers for 3d printing.

Here are some pictures of them. Below will be a link for the .obj file. They are currently scaled for my hands, which is a medium 8.75 to 9 inches. The only thing that you will need to do after you scale it is to move the individual finger pieces apart a bit. if you don't there is a good change when they get printed they will be stuck together.

 

[Murdoch]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Does anyone know? Three words on the left side, just below the canon slide?

 

[ladman]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Does anyone know? Three words on the left side, just below the canon slide?

No idea, the print is far too small in that picture. I i had to guess, it most likely is a warning or something for the track the cannon is on.

 

[Mdonci]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Finally finished creating the hands and fingers for 3d printing.

Here are some pictures of them. Below will be a link for the .obj file. They are currently scaled for my hands, which is a medium 8.75 to 9 inches. The only thing that you will need to do after you scale it is to move the individual finger pieces apart a bit. if you don't there is a good change when they get printed they will be stuck together.

IP Hands for 3D Printing - Download - 4shared - Thaddeus Ladzinski

Can you share it in another extension? I am familiar with SolidWork, it can open stl (or something like this) files. I'd appreciate it

 

[gaiatron]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

so jackie, after the boot, all is finished now, right? all that is needed is a finished build by a member.

i just wanna say thank you very much for making every builder's dream come true! and its been an honor unfolding your works.

now all i need is a steady supply of 5mm rubber foam to continue my build...

 

[ironmaided]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

as i wait for ironshawarma's mark 47 suit to be shipped. .i decided to make me a IP chest. . .here's the one i built and i also primed it with grey, and my v2 mark 47 chest (i scrapped my first one just to make templates for ironshawarma's mark 47

 

[ladman]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Can you share it in another extension? I am familiar with SolidWork, it can open stl (or something like this) files. I'd appreciate it

Yes i can put it in a .stl file for you!! anyone else need it in another file format just let me know

 

[Murdoch]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Yes i can put it in a .stl file for you!! anyone else need it in another file format just let me know

If you are talking about hand files, i'll take one of those as well please...GM

 

[peruski]

Re: Jackieisrockin's IM3 Iron Patriot Pepakura Files! Boot added

Finally finished creating the hands and fingers for 3d printing.

Here are some pictures of them. Below will be a link for the .obj file. They are currently scaled for my hands, which is a medium 8.75 to 9 inches. The only thing that you will need to do after you scale it is to move the individual finger pieces apart a bit. if you don't there is a good change when they get printed they will be stuck together.

IP Hands for 3D Printing - Download - 4shared - Thaddeus Ladzinski

Any guesses as to what it would cost to have a pair of these printed? I have never had anything printed and am completely in the dark about how it works. I was going to build an IP for my 8 year old son. If I can skip the hands in lieu of having them printed...I'd be all for it. But if they're going to be like $200 each then I will pep the tiny fingers.

Either way... Awesome model and thanks for sharing!