Iron Man Mk.45 Pep! **Helmet and Neck complete and unfolded!**

Biskt

Well-Known Member
RPF PREMIUM MEMBER
Hey everyone!
Time for me to give back to this fantastic community!
I've decided to model the Mk.45 helmet. I may do the rest of the suit, or parts of it, but as far as I am aware there's at least two people working on that already, so we'll see.

HelmampNeck_Iso_zpsabq9gy3l.jpg


Version 1 Helmet and Neck files are done, and unfolded for foam.
They are password protected, the password is WARMACHINE ROX :)

Enjoy!

Helmet:
Helm_Iso_zps4rstk32h.jpg

(A4) Foam: ttp://www.mediafire.com/download/2suf1c8xoq90xl7/Blackout%27s+Mk45+Helmet+Foam.pdo#39;s_Mk45_Helmet_Foam.pdo

Neck:
Neck_Iso_zpsdvib1mwa.jpg

(A4) Foam: http://www.mediafire.com/download/n...'s+Mk45+Neck+Foam.pdo#39;s_Mk45_Neck_Foam.pdo




----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Original post:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Here's my progress so far,

Helmet45%20WIP2_zpskbluxv2r.jpg


Helm_Iso_zps4rstk32h.jpg


Neck_Iso_zpsdvib1mwa.jpg
 
Last edited by a moderator:
Re: Iron Man Mk.45 Helmet model for pepakura

Fantastic! After looking at yours, I realize my front is entirely wrong... mostly just the eye shape and that my chin is too wide! I'll have to go fix that now... But great model!
 
Re: Iron Man Mk.45 Helmet model for pepakura

Thanks everyone!
More progress, this one is coming on fast. I'm going to do a multiple versions, one with the panel lines, and one without (only visible by enabling the texture in pep designer) for foam.
 
Re: Iron Man Mk.45 Helmet model for pepakura

Anyone planning on doing a run of these? If so PM me and let me know, i would be interested.
 
Re: Iron Man Mk.45 Helmet model for pepakura

STARLORD13 Yes I am actually getting this helm 3D Printed, and will be doing a small run hopefully.
The helmet is almost done now. I keep changing bits here an there. I've changed the 'eyebrow' sections, rebuilt the jaw and chin/lip, completed the back section, added the small lip that separates the cheek indent from the jaw, and also deepened the vent areas at the top of the faceplate. I've also made a start on the neck because why not? ;)

Helmet45%20WIP7b_zps7ivm6rjv.jpg


Helmet45%20WIP7a_zpsubdpeqmx.jpg


Helmet45%20WIP7c_zpszazh5fvg.jpg


If anyone finds decent ref images of what on earth is going on in the cheek please post it here!
watisthis_zpsjc3lho97.jpg


There's still a few bits to polish and tweak, once i'm happy with it i'll get it unfolded and post it here.
 

Attachments

  • Helmet45%20WIP7b_zps7ivm6rjv.jpg
    Helmet45%20WIP7b_zps7ivm6rjv.jpg
    303.6 KB · Views: 174
  • Helmet45%20WIP7b_zps7ivm6rjv.jpg
    Helmet45%20WIP7b_zps7ivm6rjv.jpg
    303.6 KB · Views: 249
  • Helmet45%20WIP7b_zps7ivm6rjv.jpg
    Helmet45%20WIP7b_zps7ivm6rjv.jpg
    303.6 KB · Views: 128
  • Helmet45%20WIP7a_zpsubdpeqmx.jpg
    Helmet45%20WIP7a_zpsubdpeqmx.jpg
    321.4 KB · Views: 112
  • Helmet45%20WIP7a_zpsubdpeqmx.jpg
    Helmet45%20WIP7a_zpsubdpeqmx.jpg
    321.4 KB · Views: 118
  • Helmet45%20WIP7c_zpszazh5fvg.jpg
    Helmet45%20WIP7c_zpszazh5fvg.jpg
    336.2 KB · Views: 148
  • Helmet45%20WIP7c_zpszazh5fvg.jpg
    Helmet45%20WIP7c_zpszazh5fvg.jpg
    336.2 KB · Views: 130
  • Helmet45%20WIP7c_zpszazh5fvg.jpg
    Helmet45%20WIP7c_zpszazh5fvg.jpg
    336.2 KB · Views: 166
  • Helmet45%20WIP7a_zpsubdpeqmx.jpg
    Helmet45%20WIP7a_zpsubdpeqmx.jpg
    321.4 KB · Views: 175
  • watisthis_zpsjc3lho97.jpg
    watisthis_zpsjc3lho97.jpg
    132.5 KB · Views: 153
  • watisthis_zpsjc3lho97.jpg
    watisthis_zpsjc3lho97.jpg
    132.5 KB · Views: 122
  • watisthis_zpsjc3lho97.jpg
    watisthis_zpsjc3lho97.jpg
    132.5 KB · Views: 103
  • Helmet45%20WIP7b_zps7ivm6rjv.jpg
    Helmet45%20WIP7b_zps7ivm6rjv.jpg
    303.6 KB · Views: 170
  • Helmet45%20WIP7a_zpsubdpeqmx.jpg
    Helmet45%20WIP7a_zpsubdpeqmx.jpg
    321.4 KB · Views: 143
  • Helmet45%20WIP7c_zpszazh5fvg.jpg
    Helmet45%20WIP7c_zpszazh5fvg.jpg
    336.2 KB · Views: 180
  • watisthis_zpsjc3lho97.jpg
    watisthis_zpsjc3lho97.jpg
    132.5 KB · Views: 123
Last edited by a moderator:
Re: Iron Man Mk.45 Helmet model for pepakura

This is incredible man! The only thing that nighg be changed is to make the chin a tad bit wider. You can see the difference in the first comparison photo you posted. Also I completely forgot to add the groove on the top of the helmet in mine. :facepalm As for the cheek, I think it's just a diagonal groove where the light is just hitting the top part of the lower section. But again, this is very, very well done.

Edit: The groove is visible in a picture posed by iNSPIRATION on page 2 (post #32) in KadzaNeon's modeling thread
 
Last edited:
Re: Iron Man Mk.45 Helmet model for pepakura

Shaynebishop Thanks not long now!
MiddleFinger Thanks! I've altered the chin accordingly (a chin that wide goes against everything I know ;) but it's what it looks like, so i've made the changes :) Thanks for the ref, I will check it out and add that in shortly. hopefully I'll get a better look when i see the film (I have to wait until sunday :'(

Progress wise I've completed the neck. this was quite the bugger to model due to much of the detail being a few pixels on blurry images but it's done now :) It fits nice and snug inside the helmet.

Helmet45%20WIP8c_zpsq1ecufm5.jpg


Helmet45%20WIP8d_zps8xvjbwet.jpg


Helmet45%20WIP8a_zps3l2lmsoi.jpg


Helmet45%20WIP8b_zpsve8qh4jc.jpg
 

Attachments

  • Helmet45%20WIP8c_zpsq1ecufm5.jpg
    Helmet45%20WIP8c_zpsq1ecufm5.jpg
    269 KB · Views: 182
  • Helmet45%20WIP8c_zpsq1ecufm5.jpg
    Helmet45%20WIP8c_zpsq1ecufm5.jpg
    269 KB · Views: 229
  • Helmet45%20WIP8d_zps8xvjbwet.jpg
    Helmet45%20WIP8d_zps8xvjbwet.jpg
    265.7 KB · Views: 168
  • Helmet45%20WIP8d_zps8xvjbwet.jpg
    Helmet45%20WIP8d_zps8xvjbwet.jpg
    265.7 KB · Views: 101
  • Helmet45%20WIP8c_zpsq1ecufm5.jpg
    Helmet45%20WIP8c_zpsq1ecufm5.jpg
    269 KB · Views: 121
  • Helmet45%20WIP8d_zps8xvjbwet.jpg
    Helmet45%20WIP8d_zps8xvjbwet.jpg
    265.7 KB · Views: 207
  • Helmet45%20WIP8a_zps3l2lmsoi.jpg
    Helmet45%20WIP8a_zps3l2lmsoi.jpg
    209.2 KB · Views: 436
  • Helmet45%20WIP8a_zps3l2lmsoi.jpg
    Helmet45%20WIP8a_zps3l2lmsoi.jpg
    209.2 KB · Views: 118
  • Helmet45%20WIP8a_zps3l2lmsoi.jpg
    Helmet45%20WIP8a_zps3l2lmsoi.jpg
    209.2 KB · Views: 556
  • Helmet45%20WIP8b_zpsve8qh4jc.jpg
    Helmet45%20WIP8b_zpsve8qh4jc.jpg
    97 KB · Views: 129
  • Helmet45%20WIP8b_zpsve8qh4jc.jpg
    Helmet45%20WIP8b_zpsve8qh4jc.jpg
    97 KB · Views: 214
  • Helmet45%20WIP8b_zpsve8qh4jc.jpg
    Helmet45%20WIP8b_zpsve8qh4jc.jpg
    97 KB · Views: 156
  • Helmet45%20WIP8d_zps8xvjbwet.jpg
    Helmet45%20WIP8d_zps8xvjbwet.jpg
    265.7 KB · Views: 108
  • Helmet45%20WIP8c_zpsq1ecufm5.jpg
    Helmet45%20WIP8c_zpsq1ecufm5.jpg
    269 KB · Views: 131
  • Helmet45%20WIP8a_zps3l2lmsoi.jpg
    Helmet45%20WIP8a_zps3l2lmsoi.jpg
    209.2 KB · Views: 144
  • Helmet45%20WIP8b_zpsve8qh4jc.jpg
    Helmet45%20WIP8b_zpsve8qh4jc.jpg
    97 KB · Views: 151
Last edited by a moderator:
Re: Iron Man Mk.45 Helmet model for pepakura

Amazing job bro!! Ive got a 3d printer...are you able to make it an stl file? I'll print you one for your hard work
 
Re: Iron Man Mk.45 Helmet model for pepakura

Shaynebishop Sorry my friend but i've already spoken to someone about printing it, he'll be the only one getting his hands on the high poly stl file.
 
Last edited by a moderator:
Re: Iron Man Mk.45 Helmet model for pepakura

The helmet is done and unfolded for foam guys! and the neck too if anyone want's to give it a shot!
The files are password protected, just PM me for the password! :)
If you do use the files, make sure to post your builds here! :)


 
Are you doing a run of completed ones? I do not know how to do any of this but I Really want one. Just PM me and let me know the details please.
 
This thread is more than 7 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top