Iron Man Mark 42 (Foam). !!UPDATE SUIT FINISHED!!! 26.1.15

Re: Iron Man Mark 42 (Foam). !!UPDATE!! 28.10.14

Max5796 said:
I only have this small piece of foam left but it also works with this :)


1. Step

View attachment 401133

You have the foam piece and make a line with a pen where you wanna have this kind of sharp line on your suit :)

2. Step

View attachment 401134


You cut out an triangle out of the foam like shown in the photo below :)

3. Step

View attachment 401138View attachment 401139

You have cut out the triangle and the then you put some hot glue into this triangle and glue it with the angle you want it to be together :) Finish :D
Click to expand...

Wow awesome! Thanks so much! I'll be sure to let you know if I attempt a build :)


Sent from my iPhone using Tapatalk
 
Re: Iron Man Mark 42 (Foam). !!UPDATE!! 28.10.14

rentonjosh said:
Wow awesome! Thanks so much! I'll be sure to let you know if I attempt a build :)


Sent from my iPhone using Tapatalk
Click to expand...

No problem I am happy to help :) Yeah definitely let me know if you start your own suit

Max
 
Re: Iron Man Mark 42 (Foam). !!UPDATE!! 28.10.14

Max5796 said:
No problem I am happy to help :) Yeah definitely let me know if you start your own suit

Max
Click to expand...

I'll do that for sure. And just one more thing, what's the size and thickness of your foam sheets that you used?


Sent from my iPhone using Tapatalk
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

And how many were needed for the whole suit?


Sent from my iPhone using Tapatalk
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

That stuff is Plastazote LD45 with 5mm thickness. I haven't seen anyone from the US use it so far. In my opinion Plastazote is so much better to work with than Evazote. It makes a huge difference.
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

rentonjosh said:
And how many were needed for the whole suit?


Sent from my iPhone using Tapatalk
Click to expand...


It has a thickness of 10 mm for almost every part of the suit :) some times I used 5 mm. I had to redo an large amount of parts because I didnt like the finish but I think about 5-6 qm should be more than enough ! :)

- - - Updated - - -

Dirtsen said:
That stuff is Plastazote LD45 with 5mm thickness. I haven't seen anyone from the US use it so far. In my opinion Plastazote is so much better to work with than Evazote. It makes a huge difference.
Click to expand...


I used Plastazote ld 45 with 10 mm the most but that doesnt matter :) Yeah plastazote is so much better specially the way you can bend it with a heat gun and so on :)
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Max5796 said:
It has a thickness of 10 mm for almost every part of the suit :) some times I used 5 mm. I had to redo an large amount of parts because I didnt like the finish but I think about 5-6 qm should be more than enough ! :)

- - - Updated - - -




I used Plastazote ld 45 with 10 mm the most but that doesnt matter :) Yeah plastazote is so much better specially the way you can bend it with a heat gun and so on :)
Click to expand...

Sorry I'm from the U.S. What does qm mean? :)


Sent from my iPhone using Tapatalk
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Qm is short for Quadratmeter which means squaremeters. You get the idea.


Gesendet von iPad mit Tapatalk
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Ohhhhhh. Awesome thanks


Sent from my iPhone using Tapatalk
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

@Max5796

wow - der Anzug sieht einfach nur fantastisch aus ! ich bin erst seit kurzem in der Community und hab mir "mal eben" kurz vor halloween gedacht ich baue sowas auch

den aufwand total unterschätzt (und die kosten) so das ich nur helm & handschuhe fertig bekommen habe ...
die qualität und die detailtreue zum original seien mal dahingestellt, aber es war mein erstes Projekt und für knapp 3 wochen arbeit ist es ausreichend gut geworden für diesen
einen abend ^^

habe mir deine Doku über den Anzug mal genauer angesehen und denke darüber nach ebenfalls mit dem Plastazote einen neuen Anzug zu beginnen :D

DSC04118.JPG








DSC04118.JPG
 
Last edited by a moderator:
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Venom1989 said:
@Max5796

wow - der Anzug sieht einfach nur fantastisch aus ! ich bin erst seit kurzem in der Community und hab mir "mal eben" kurz vor halloween gedacht ich baue sowas auch

den aufwand total unterschätzt (und die kosten) so das ich nur helm & handschuhe fertig bekommen habe ...
die qualität und die detailtreue zum original seien mal dahingestellt, aber es war mein erstes Projekt und für knapp 3 wochen arbeit ist es ausreichend gut geworden für diesen
einen abend ^^

habe mir deine Doku über den Anzug mal genauer angesehen und denke darüber nach ebenfalls mit dem Plastazote einen neuen Anzug zu beginnen :D

View attachment 401273
Click to expand...


Sieht auf jeden fall Klasse aus !! Ja man unterschätzt echt sehr leicht wie viel Arbeit in so einem Anzug steckt und was er an Kosten verursacht allein die Kosten für die Farben sind immens wenn man gute Farben haben möchte :) Du siehst ja das ich schon 1 jahr gebraucht habe um den Anzug in der Qualität bewerkstelligt zu bekommen ( natürlich mit Sommerpause :D ). Also ich kann dir Plastazote nur empfehlen ist wirklich ein tolles Material für einen Anzug und meines erachtens der beste Schaumstoff für so Arbeiten :) Bei Fragen meld dich einfach ich stehe immer gerne rede und antwort.

Max

Ach und vielen Dank für dein positives Feedback :)
 
Last edited by a moderator:
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Hey Jungs, Forumsprache ist English. Nicht dass die Mods wieder schimpfen :p

- - - Updated - - -

And congratulations on the suit! Looks Über-Awesome :D
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Dirtsen said:
Hey Jungs, Forumsprache ist English. Nicht dass die Mods wieder schimpfen :p

- - - Updated - - -

And congratulations on the suit! Looks Über-Awesome :D
Click to expand...

Oh ja du hast recht :D dann lieber wieder zurück zur englischen Sprache from NOW on haha


Thank you for your feedback !
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

If there is anyone who has questions about my suit or how I build it please ask :) I am happy if I can help you out there and I also will give you than some Photos on how you do this stuff like an step by step explanation above :) I am also interested in some critical feedback what I could do better.
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Yes... show us a pic of you wearing that thing!! Cant wait to see it in action. :D
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

Hey max, nice work! It's season opening of Kölner Karneval tomorrow . U going? And if yes are u wearing that suit?
 
Re: Iron Man Mark 42 (Foam). !!UPDATE ONLY LIGHTS LEFT!! 4.11.14

JayCVenlo said:
Yes... show us a pic of you wearing that thing!! Cant wait to see it in action. :D
Click to expand...


Yes I will make a few photos of the me wearing it when the lights are here but the lights I ordered from UK take a bit longer so I just cant go on with the suit yet except from a few small adjustments and coverparts :) But I think in one week I will have everything I need

- - - Updated - - -

markseven said:
Hey max, nice work! It's season opening of Kölner Karneval tomorrow . U going? And if yes are u wearing that suit?
Click to expand...

Thank you it´s great to get such good feedback from all of you :)

Yeah I life in Cologne so I had a good day at 11.11 :D Much alcohol and drinks for sure haha but I couldnt wear it because the suit is still not finished completely

- - - Updated - - -

ironmaided said:
sweet looking mark 42 :thumbsup
Click to expand...

To get feedback from you is very much amazing ! I am proud that especially you like my build because the suits you build are so amazing and to only get close to the level of suit building you do is very nice :D

- - - Updated - - -

The lights I ordered will arrive friday !! :)

I will post some photos of the finished suit in the evening of friday I hope you all like it haha
 
You must log in or register to reply here.

Similar threads

paxtoprime94
“FABRIC” IRON MAN SUIT? (Fabric-covered foam?)
Replies
2
Views
332
Kolin86
Kolin86
Kolin86
Iron man mark 4 build (klakus cast)
2
Replies
39
Views
2,307
Kolin86
Kolin86
R
  • Sale
Marvel Beast Kingdom Iron Man Mark 50 Battle Damaged Helmet
Replies
5
Views
549
rebelranger
R
paxtoprime94
Idea for Iron Man Suit that you can step right in/out of
Replies
0
Views
248
paxtoprime94
paxtoprime94
paxtoprime94
Best ways to attach/cover foam with fabric?
Replies
3
Views
289
masterjedi322
masterjedi322
Back
Top