Immortan Joe costume from Mad Max, Fury Road

Big Boss is making mine because he had extra petg he is doing the lower half abs then the shoulders on top

Sent from my SM-G900T using Tapatalk
 
Labor Day weekend was productive. Got all my 3D printed pieces painted up (thanks to everyone who made and shared them), and finally did the first makeup test. So far, so good!
immortan jeff 4.jpg
 
Predatormv said:
I notice a lot of you are doing Joe's chase cod piece, anyone id'ed the parts for his ceremonial belt? I see some mentions of a cam shaft holder but when I google pics of that I can't figure out where it would go. I can source the gear, it's a motorcycle rear wheel chain sprocket.
Click to expand...

I just got back from Dragon*Con, I 3D modeled the gear and cam shaft and printed them. If you have access to a 3D printer I can send you the .STL files. I see you're in Orlando though, if you're in the East Orlando area I could print them out and get them to you instead. For the skull and cross bar, my girlfriend made them out of apoxie.
 
aestheticus do you happen to have the 3d files of the car emblems on the cod piece and for the shin guards? I found a 3d print place here in town.

Sent from my SM-G900T using Tapatalk
 
Last edited by a moderator:
I need some nuts that is literally like the last small detail pieces I need please!!!! Someone help me out I got the money's... I know I know shapeways but that is soooooo expensive is there any other way?


Sent from my iPhone using Tapatalk
 
aestheticus said:
I just got back from Dragon*Con, I 3D modeled the gear and cam shaft and printed them. If you have access to a 3D printer I can send you the .STL files. I see you're in Orlando though, if you're in the East Orlando area I could print them out and get them to you instead. For the skull and cross bar, my girlfriend made them out of apoxie.
Click to expand...
Wow that's super nice of you. I'm over by Sea World but I'm willing to drive. PM me and we can work out details.

- - - Updated - - -

Bigboss1o1 said:
I need some nuts that is literally like the last small detail pieces I need please!!!! Someone help me out I got the money's... I know I know shapeways but that is soooooo expensive is there any other way?


Sent from my iPhone using Tapatalk
Click to expand...
someone a few pages back suggested getting one and casting it and then just poring resin copies of it, it would take very little mold and resin to get what all you need.
 
TrapperBlu said:
@aestheticus do you happen to have the 3d files of the car emblems on the cod piece and for the shin guards? I found a 3d print place here in town.

Sent from my SM-G900T using Tapatalk
Click to expand...

For the cod piece, I think Ein made the car emblems on there. For the shin guards, Hamsterstyle modeled some of those. Check out this thread for the models: http://www.therpf.com/showthread.php?t=242605

There are a few bits I also 3D modeled, and I'll try to get those into one collection of STLs.

I'd recommend downloading the latest they posted because I think they've been modified since I last downloaded them.
 
Last edited by a moderator:
Bigboss1o1 said:
I need some nuts that is literally like the last small detail pieces I need please!!!! Someone help me out I got the money's... I know I know shapeways but that is soooooo expensive is there any other way?


Sent from my iPhone using Tapatalk
Click to expand...

I might be doing some resin casts, keep you posted!
 
eriksmask did someone make the horse shoe blue patch? What did you do for it

Sent from my SM-G900T using Tapatalk
 
Last edited by a moderator:
TrapperBlu said:
@eriksmask did someone make the horse shoe blue patch? What did you do for it

Sent from my SM-G900T using Tapatalk
Click to expand...
No one has been able to nail it down yet.
0809151808~2.jpg
I'm using a diamond shaped scout patch for the time being, but I am certain there are more accurate patches out there.
 
Last edited by a moderator:
I'm still on a mission to find the real filters. The closest I can get us lawn mower filters

Sent from my SM-G900T using Tapatalk
 
Hey I found these at the car yard might work for the medals. I'll try it out and if so I got extrasuploadfromtaptalk1441754638717.jpg

Sent from my SM-G900T using Tapatalk
 
I'm giving some serious thought to jumping head on into making the Immortan's armor set (because my mask looks so lonely) but I can't 3D print any files available for the medals and such; anyone planning on making casts available for medals and such? I know there's a patch run but I've not heard anything about the medals.
 
You must log in or register to reply here.

Similar threads

Troxx
Max Rockatansky Fury Road costume
Replies
19
Views
6,480
TymanRoach
TymanRoach
Ein
Interest Mad Max: Fury Road - Immortan Joe Embroidered Armor Patches
2
Replies
30
Views
5,406
Lawoman26
L
thomasotom
Immortan Joe's Mask, from Mad Max - Fury Road.
Replies
16
Views
8,020
TheShinyOne
TheShinyOne
Back
Top