halo M6C/SOCOM build

papasmurf

New Member
heres is a M6C/SOCOM i made a while back it was built from wood and then was molded and cast. it has alot off moving parts and it also has a flashlight and a red laser. its about 15 inches long and about 10 inches tall.everything is held together with two hexbolts and one screw this allows for everything to be broken down with ease.

Moving parts :
spring loaded trigger
working slide lock
clip release button
clip is spring loaded and hold 9mm bullets
slide is spring loaded and can be locked in open postion
button for flashlight and another for laser

4039320878_4ffea96719.jpg


4039316900_ffe55af1d5.jpg


4039313264_1601997ae0.jpg


all finished and primed and ready to be molded

4152883900_09e8a656c2.jpg


4152124317_e4c7d84008.jpg


4152126577_d27d91bacf.jpg


had trouble with Oomoo 25 mold breaking on me so made a new on from mold max 27T

4893459940_4e7d4a8e1a.jpg


4892862879_1c59713789.jpg


4892863255_66e393ba8c.jpg


4893461028_b2b36850f6.jpg


4892864403_098b7a5a98.jpg


4892864661_4bb795ed40.jpg


4905600907_c57c0b7037.jpg


electronics through all its different stages

4209238552_ed206d078c.jpg


4892862471_fcb08a9bca.jpg


5357126983_803ec6b7a7.jpg


5357753506_f3beaa1147.jpg


5357139311_6d268002e7.jpg


twins

4893459570_429f59461b.jpg


4892862725_b302388704.jpg
 
So... does this come with the electronics/laser/LED? Either way this is amazing, by far my favourite pistol from Halo.
 
This thread is more than 12 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top