DUNE stillsuit FREE files for laser cutting

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


XavNZ92

Member
RPF PREMIUM MEMBER
So after weeks of finding reference and actually getting some insider information I managed to figure out and "reverse engineer" the DUNE (2021) still suit (padded parts).

A good friend Jorge Zepeda (you are AMAZING) then drew these up for laser cutting and I am happy to share these with the community now.

These files include almost ALL the soft parts that are not part of the main fabric suit and are scaled to a 5'8 60 kilogram person but can very easily be scaled up or down before laser cutting or printing out in paper and cutting manually out of foam or neoprene, these have ALL the slits for straps and holes for snaps and the parts should be cut out of 3mm EVA foam or 3mm neoprene.

See pictures for representation of files and reference picture.

FILES ARE HERE :


PLEASE NOTE : These files include two STL files for the crotch protection and the belly pad (only parts that are apparently "hard" plastic.

DISCLAIMER: These files are NOT to be used for lucrative purposes and any modifications other than scaling should be consented by Jorge and myself.
 

Attachments

  • 243164637_555655918980130_3181746615259419297_n.gif
    243164637_555655918980130_3181746615259419297_n.gif
    221.9 KB · Views: 163
  • 243256847_374395161076816_3643447489024231029_n.gif
    243256847_374395161076816_3643447489024231029_n.gif
    168.5 KB · Views: 139
  • 243215409_380449760209817_1819281486745136371_n.gif
    243215409_380449760209817_1819281486745136371_n.gif
    442.1 KB · Views: 151
  • 242103830_585205589299839_8972525719990727604_n.jpg
    242103830_585205589299839_8972525719990727604_n.jpg
    79.6 KB · Views: 162

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

XavNZ92

Member
RPF PREMIUM MEMBER
Here is an updated version of the files along with pictures of the very roughly assembled files.

neoprene vest.zip
 

Attachments

  • 244733676_4572293942830790_2713525040623618852_n.jpg
    244733676_4572293942830790_2713525040623618852_n.jpg
    40.5 KB · Views: 87
  • 244255559_4572294142830770_7819409834376529474_n.jpg
    244255559_4572294142830770_7819409834376529474_n.jpg
    34.6 KB · Views: 89
  • 244222356_4572294216164096_9146564778202728026_n.jpg
    244222356_4572294216164096_9146564778202728026_n.jpg
    82.3 KB · Views: 89

Malibu139

Sr Member
RPF PREMIUM MEMBER
That is looking great. Is this mostly sealed foam. Will it be painted or weathered or as is?

How are you planning to do the sleeves? They have an airsoft dye sleeve look to them.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

XavNZ92

Member
RPF PREMIUM MEMBER
That is looking great. Is this mostly sealed foam. Will it be painted or weathered or as is?

How are you planning to do the sleeves? They have an airsoft dye sleeve look to them.
Which sleeves are you talking about ? The fabric part of the costume ?

I have a seamstress working on that im not that good with fabric.

As for the foam I'm thinking of what to seal it with as I really don't want it to crack or wrinkle too much.

Of course it will be weathered !
 

Malibu139

Sr Member
RPF PREMIUM MEMBER
Plastidip for the foam maybe?

The undersuit looks to have sleeves. But there seems to be sleeves over them that look like paintball/airsoft protective over sleeves
The left arm here at the elbow there is an opening.
56D0243D-AB7F-4CC9-8397-0009B9B06B1F.jpeg
7C8C6231-F30E-49A5-8B81-0AAB50FCD157.jpeg
 

CrossfireProps

Member
RPF PREMIUM MEMBER
So after weeks of finding reference and actually getting some insider information I managed to figure out and "reverse engineer" the DUNE (2021) still suit (padded parts).

A good friend Jorge Zepeda (you are AMAZING) then drew these up for laser cutting and I am happy to share these with the community now.

These files include almost ALL the soft parts that are not part of the main fabric suit and are scaled to a 5'8 60 kilogram person but can very easily be scaled up or down before laser cutting or printing out in paper and cutting manually out of foam or neoprene, these have ALL the slits for straps and holes for snaps and the parts should be cut out of 3mm EVA foam or 3mm neoprene.

See pictures for representation of files and reference picture.

FILES ARE HERE :


PLEASE NOTE : These files include two STL files for the crotch protection and the belly pad (only parts that are apparently "hard" plastic.

DISCLAIMER: These files are NOT to be used for lucrative purposes and any modifications other than scaling should be consented by Jorge and myself.
These are awesome! May try and tackle it one day. What laser are you using? I assume the parts are too big for a glowforge?
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top