Dexter

That would rock if you could get some better pics. Thanks.

I could scan it if you are comfortable enough to send it to me. I totally understand if you're not. I'd even be up to tracking down and getting the proper holder for you just to make it worth your while.

DarkPassenger said:
I don't have a scanner, but I can try to take a better pic of it.
Click to expand...
 
Fluid said:
That would rock if you could get some better pics. Thanks.

I could scan it if you are comfortable enough to send it to me. I totally understand if you're not. I'd even be up to tracking down and getting the proper holder for you just to make it worth your while.
Click to expand...

Not too sure about that :confused. If it wasn't a Season 4 extra, no problem! Maybe I can take it to Kinkos or Staples or someplace like that and get it scanned?

I'll dig around. I'm sure I know someone with a scanner.
 
That laminate ID is extremely cool Tom! Do you own the other 7 ID's that are pictured in the COA as well?
 
great1 said:
That laminate ID is extremely cool Tom! Do you own the other 7 ID's that are pictured in the COA as well?
Click to expand...

No, I was offered the set, but couldn't afford it. I decided to just pick up Dexter's ID since the others don't use a laminate ID card that I know of.

I just need to find the right squared off ID holder now.
 
Here's a screen of the ID holder. You can even see the little slit at the top of the ID itself, just like the one I have.

vlcsnap-2011-08-21-00h02m19s183.png
 
DarkPassenger said:
Not too sure about that :confused. If it wasn't a Season 4 extra, no problem! Maybe I can take it to Kinkos or Staples or someplace like that and get it scanned?

I'll dig around. I'm sure I know someone with a scanner.
Click to expand...

I completely understand. It never hurts to ask.

If you can get it scanned that would be cool (the higher the resolution the better). However I'm sure I can make a pretty accurate copy with a few really clean pics too, if it's not too much trouble.
 
Fluid said:
I found this one. I'm not 100% sure it's the right one but it looks dead on to me. Check it out.

LEATHER NECK CHAIN BADGE ID HOLDER CASE WALLET >DEAL< ! | eBay
Click to expand...

I saw those on eBay. The thing is, Dexter's looks like it goes in through a slit on the top and actually pops out of the top before going back in and out the side again. (WOW, hope I explained that good). The ones on eBay all have holes like the one in your link.

Fluid said:
I completely understand. It never hurts to ask.

If you can get it scanned that would be cool (the higher the resolution the better). However I'm sure I can make a pretty accurate copy with a few really clean pics too, if it's not too much trouble.
Click to expand...

I should be able to get a better pic when it's daylight out for you.
 
DarkPassenger said:
I saw those on eBay. The thing is, Dexter's looks like it goes in through a slit on the top and actually pops out of the top before going back in and out the side again. (WOW, hope I explained that good). The ones on eBay all have holes like the one in your link.
Click to expand...

It's possible that it was modified. Remember the infamous Global Spatula? I have a set of hole punches that could be used to modify the holder to do exactly what you're describing. Just punch two holes in the top and then re-feed the neck chain through it.
 
Fluid said:
This one looks right if your re-feed the chain.

LEATHER NECK ID/BADGE HOLDER - WITH DELUXE HEAVY CHAIN | eBay
Click to expand...
Close, but the bottom corners are rounded, not square as in the screengrab DarkPassenger posted above. Unfortunately, all of the holders I've seen are like that; I haven't found any (yet) that are squared off like the original prop.
 
Last edited:
Zombie_61 said:
Close, but the bottom corners are rounded, not square as in the screengrab DarkPassenger posted above. Unfortunately, all of the holders I've seen are like that; I haven't found any (yet) that are squared off like the original prop.
Click to expand...
Good eye! I thought I found it for sure. Oh well, back to the hunt.
 
Hey guys, just a heads up. I ordered the badge holder from here, Strong Neck Chain Badge Holder and 3 x 4 ID Card, and it came in with rounded edges. Everything else is 100% perfect though. Check out the way the ID sits in the holder, just like the screen cap. You can see the slit at the top and the edges on the sides.

42f990f1.jpg

7ded7ee47698f47f44d40d3709e87.jpg


And don't worry!!! I will be making a trip to get it scanned and post up the FREE file, front and back.
 
You must log in or register to reply here.

Similar threads

DaveP
Interest DaveP's V2 and V3 run - 2024
10 11 12
Replies
231
Views
49,886
DaveP
DaveP
NakedMoleRat
My "The Greatest American Hero" reboot script (That I've been promising to post for a while now)
Replies
4
Views
1,290
bishopdonmiguel
bishopdonmiguel
LOM
An Analysis of ANH Lightsabers Timeline, Stunt Props, and Miscellaneous Theories
2
Replies
39
Views
11,381
PadawanLoLo
PadawanLoLo
Howlrunner
Ash vs Evil Dead - Lil-Lori Ballerina - doll ID?
Replies
3
Views
3,767
Apollo
Apollo
Daeothar
It's another Holy Grail! In a box...
Replies
12
Views
3,292
mathew
mathew
Back
Top