Delete thread

Status
Not open for further replies.
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

Hey stealth, also looking forward to the next video. Is pva glue waterproof? I mean if it rains, is the weather goin to have a dramatic effect on the build?... and can u use the glue to smooth out rough edges?
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

Here's the modded MK4 chest file

MK4_CHEST_modded.pdo - 4shared.com - online file sharing and storage - download


MK4_CHEST_modded.jpg


and the pdf if you want it

IM_MK4_CHEST_FOAM.7z - 4shared.com - online file sharing and storage - download
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

breakpoint said:
Btw do u have and pep fils for foam, for the "under shirt" or chest/back connecting thingy . like graphic jordan has here in his thread. first pic

http://www.therpf.com/f24/eva-foam-...artial-right-arm-paint-up-pics-8-26-a-108184/
Click to expand...


you mean the brace?

here's the mk4 and mk6 braces

MK4_BRACE.pdo - 4shared.com - online file sharing and storage - download

MK4_BRACE.jpg


MK6_BRACE.pdo - 4shared.com - online file sharing and storage - download

IM_MK6_BRACE_FOAM.jpg
 
Last edited:
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

Clips added to allow the chest and Back to be removed/attached easily. Shoulders done and also the right bicep. So far so good :)

 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

awesome thx Stealth ^^

just what I meant :D
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

I like how you keep calling me STEALTH. :lol
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

hahah lol sry j0wE :p been up for many hours I need some sleep :p
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

that looks awesome, standard scale?
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

you guys are awesome.
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

Has anyone released the collar files?

Jonny said:
Hi Stealth,
I haven't seen the collar pieces amongst your posts. I've been able to make my own, but as I don't have Pepakura Designer I can't share what I've done.

They're not necessarily required but they do make it easier to attached the top of the back to the top of the front.
Click to expand...
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

This is great stuff and more or less planning my first IM EVA foam build. Thanks Stealth and all those involved for sharing. As of today I bought these anti-fatigue floor mats from Harbor Freight Tool’s here in the US and they measure about 10-11mm in thickness. From what I’ve read, there have been builders using different thickness for building from the neck down to shoes anywhere between 2, 4 and 6mm foam and it’s getting hard to figure out which to use for any part. So far, I understand that the helmet should be pepped in standard card stock to keep details crisp as Stealth advises. So 2 questions, can we get a clear breakdown as to what EVA thickness should be used for each body part (would be helpful) and are the 10-11mm foam’s I just bought of any use at all?
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

mizuno hadouken said:
Has anyone released the collar files?
Click to expand...
I had some collar plates laying around that I had done in resin/fiberglass... In the end, I ended up just making my own. The pep file version isn't as accurate to the movie as if you were to just make your own. Here's mine as an example.

collarplate1.jpg


Here they are colored in photoshop for a better visual.

collarplate2.jpg
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

simul8r said:
So 2 questions, can we get a clear breakdown as to what EVA thickness should be used for each body part (would be helpful) and are the 10-11mm foam’s I just bought of any use at all?
Click to expand...

I'd use the 10mm for the chest and back. this is what I plan on doing when I do my war machine, everything else in 6mm
 
Re: Robo3687's IRON MAN Mark 4/6 Pepakura FOAM Templates -Easy to Build "Green" Versi

Hi guys! My name is Vincent. Im new here, but im semi-not new to foam building. I have built a Halo 3 Recon helmet out of Foamies on the 405th.com :)
so being used to halo armor making, i gotten used to tabs. I watched stealth's video about foam armor making and he instructed not to use tabs, but cut the edges at a 90 degree angle and glue

How can i do this when making the iron man helmet with thin foamies? id imagine it would be pretty hard ;) or should i do this with tabs?

sorry for the noob-ishness
 
Status
Not open for further replies.

Similar threads

ExplodingApple
DELETE
Replies
1
Views
156
JurassicChaser
JurassicChaser
joez2391
Delete
Replies
0
Views
544
joez2391
joez2391
T
Aliens (1986) Production Alien Queen components
Replies
2
Views
817
trimmersparks
T
bwayne64
Please delete
Replies
0
Views
410
bwayne64
bwayne64
MARK M3
Delete
Replies
0
Views
497
MARK M3
MARK M3
Back
Top