yuumi2891103
Master Member
There is a blank space above the stove in a living room.
It was used to cover with the brick tiles but one day (many years ago) it fell down suddenly.:eek
I had discussed with my Highness the plans and estimated cost.
We have agreed with the total JPY 5000 to 8000. about 45 to 75 USD.
OK, Lets start.
I choice MDF for the material.
That is light, stiff, solid, easy to craft and cheap.
I went to the large DIY shop and bought three 5.5 mm thick '3 x '6 MDF board for about 45 USD.
And they cut it for me one feet square.
To save the time, I fix the sizes of the parts as 3 cm 5 cm and 7 cm. All the angles are 45 degrees.
I built totally16 panels with different patterns.
Paint it and plant some LED behind.
And put it up on the wall.
It took 10 days and cost us about $70 including splay paint.
Thank you very much for looking.
katsu
It was used to cover with the brick tiles but one day (many years ago) it fell down suddenly.:eek
I had discussed with my Highness the plans and estimated cost.
We have agreed with the total JPY 5000 to 8000. about 45 to 75 USD.
OK, Lets start.
I choice MDF for the material.
That is light, stiff, solid, easy to craft and cheap.
I went to the large DIY shop and bought three 5.5 mm thick '3 x '6 MDF board for about 45 USD.
And they cut it for me one feet square.





To save the time, I fix the sizes of the parts as 3 cm 5 cm and 7 cm. All the angles are 45 degrees.


I built totally16 panels with different patterns.




Paint it and plant some LED behind.
And put it up on the wall.






It took 10 days and cost us about $70 including splay paint.
Thank you very much for looking.
katsu