Darkside501st's Iron Man Mk VII pepakura files - Password in First Post

Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

1z68wft.jpg


i built this for a friend here at therpf.com :) i also missed building darkside's files
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Well, here is a WIP shot of the new V2 back.

 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

sorry, darkside... i missed the mark today. i wound up sleeping in this morning. i'll get those pics done asap tonight.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

very nice !!
cant wait till the release !!!
if i can suggest something..
you shouild increase the height a little bit !
but its just a suggestion :/
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

ironmaided said:
:thumbsup handsome! 3D modeling at its finest! great job again darkside!
Click to expand...

streetsoul said:
Ooooooooshtt looking good buddy as always :)
Click to expand...

Thanks guys... glad you like it so far.

Barros said:
sorry, darkside... i missed the mark today. i wound up sleeping in this morning. i'll get those pics done asap tonight.
Click to expand...

No problem, get them to me when you can.

omarbou1 said:
very nice !!
cant wait till the release !!!
if i can suggest something..
you shouild increase the height a little bit !
but its just a suggestion :/
Click to expand...

If you recall the V2 files will be available in several different scales already. ;)
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Soooo impatient to see the V2 coming! Looks awesome so far!
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Hi id like to get the password for the files.i recently have started the ironman armor and i am having trouble scaling i am 5 5 180 pds and i figured id try another method and i seen you are the same size the helmet is the hardest for me so if you please it would be appreciated i will not share them and i will send a contrubution thank you
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

berserker13 said:
Hi id like to get the password for the files.i recently have started the ironman armor and i am having trouble scaling i am 5 5 180 pds and i figured id try another method and i seen you are the same size the helmet is the hardest for me so if you please it would be appreciated i will not share them and i will send a contrubution thank you
Click to expand...

Please read the OP. This has been discussed already. You need to send Dark side a PM requesting the password.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

berserker13 said:
Hi id like to get the password for the files.i recently have started the ironman armor and i am having trouble scaling i am 5 5 180 pds and i figured id try another method and i seen you are the same size the helmet is the hardest for me so if you please it would be appreciated i will not share them and i will send a contrubution thank you
Click to expand...

you need to send a PM to Darkside in order to get the password and for the scale you can check my post one or to pages back where I try to explain how I scale the parts
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Hello Darkside, hello guys,

happy eastern from germany.

Finished the helmet (cutting and gluing) last week and put the first coat resin on.

I got 3 questions:

1. The helmt fits straight with my ears. Is that ok ?
Is there enough space for electronics (faceblade, eyes) and pad

2. The resin smells very strong. its a cheap one from the hardware store
i applied the resin outside, cause of the smell.

3. and my last question: Does the SILHOUETTE PORTRAIT also work with pepakura?? its 100 Euro cheaper than the CAMEO.

Here pics of the helmet and my workshop.


 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

WOW! That 3D model is wicked! I'm sure the V2 files will be worth the wait :D
 
Last edited:
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

cooper32 said:
Hello Darkside, hello guys,

happy eastern from germany.

Finished the helmet (cutting and gluing) last week and put the first coat resin on.

I got 3 questions:

1. The helmt fits straight with my ears. Is that ok ?
Is there enough space for electronics (faceblade, eyes) and pad

2. The resin smells very strong. its a cheap one from the hardware store
i applied the resin outside, cause of the smell.

3. and my last question: Does the SILHOUETTE PORTRAIT also work with pepakura?? its 100 Euro cheaper than the CAMEO.

Here pics of the helmet and my workshop.
Click to expand...

We can't really answer #1 for you. If you had a pic of you wearing the helmet then we might be able to tell you if it looks too big. If you are saying that you can slip the helmet on over your head without detaching part of the back of the helmet then it is too big.

Fiberglass resin is a strong chemical and you should be working in a well ventalated area or outside and you should also be wearing clothes that cover your body (pants, long sleeves, and gloves) as well as a respirator.

The Silhouette Portrait doesn't yet work with the Tamasoft software. You would have to export the files as a vector format (DXF). See my tutorials here:
http://sdrv.ms/13LhHIe

It is a longer process but it is possible to cut with the Portrait.

jasonamigo23 said:
WOW! That 3D models is wicked! I'm sure the V2 files will be worth the wait :D
Click to expand...

Thanks. Glad you like it... wait till you see the final render.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

I know I can't wait to see the final render :) keep up the good work Darkside
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

The back is finished so I took some pictures with brace, neck, shoulder, back, chest, and helmet. It begins to look awesome!

The size is good! That's a relief. Next step, the flaps, then the legs.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

DevilFlash said:
The back is finished so I took some pictures with brace, neck, shoulder, back, chest, and helmet. It begins to look awesome!

The size is good! That's a relief. Next step, the flaps, then the legs.
Click to expand...

Looks great! Thanks for sharing!
 
You must log in or register to reply here.

Similar threads

Mauzzam1
Seeking Cardboard Iron Man Templates (MK3/MK85) – 2025 Working Links?
Replies
1
Views
862
Kolin86
Kolin86
paxtoprime94
Idea for Iron Man Suit that you can step right in/out of
Replies
1
Views
564
renaissance_man
renaissance_man
Colby8128
Spider-Man Dark Suit PS4
Replies
3
Views
1,150
Colby8128
Colby8128
paxtoprime94
“FABRIC” IRON MAN SUIT? (Fabric-covered foam?)
Replies
2
Views
698
Kolin86
Kolin86
Kolin86
Iron man mark 4 build (klakus cast)
2 3
Replies
43
Views
3,426
Kolin86
Kolin86
Back
Top