Darkside501st's Iron Man Mk VII pepakura files - Password in First Post

Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Brace is really usefull. It allows to adjust the position of the chest (and thus, the back).

The MK4 (but you'll understand when you download robo's file why I say Mark 4-6 folder) is the brace to use indeed. And it is the same scale used in Mark VII chest!
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

darkside501st said:
So, it sound like there are errors on one or more of the unfolds... am I understanding that correctly? You can add the tabs back in using Pep Designer. You can even put tabs on edges that are not connected to anything if you want.
Click to expand...

Not necessarily. Those extra solid lines are negligible, and I didn't have to cut them. I scored half of them to make the piece bend into shape but the rest I didn't even bother to touch.

P.S. I forgot to mention that I'm only referring to the V2 helmet.
 
Last edited:
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Hello everyone,

I am totaly new to this papercraft thing. I would like to as a noob question.
How do you do the scaling in the editor ?
And i am going to use A4 paper. Is there anything specific that i need to do ?

Thanks in advance.
 
Last edited:
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

@ agassparkle:

In Designer:

Goto "FILE"
Then "PRINT AND PAPER SETTINGS".

For "PAPER SIZE"; select A4 (should be at the top).

Rearrange the Pieces so they're not on the dotted lines in the view window on the right, Save, Print.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Hey guys. I was thinking on What part to start with for my Iron Man suit. i am quite new at Pep and thought to try the abs and cod first to find out my perfect scale. Is this Recommended? Could I please have some advice.

Also is there a release date on the v2's, so I can decide whether to wait or make it now.

Thanks
--------------------------------------
I am Iron Man
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

hey Richie11:

if I were you I'd start with the shin, it's fairly easy to do, and you can get the howl thing on and off when it's done

I found a method to fine the scale that I use and that works for me...
you find a pic of the suit (from top to bottom) that you'r going to build,
print it out and measure it
for example the printout I have is 27,9 cm tall
then measure your own height, in my case it's 194 cm
so then you say 194 divided by 27,9 = 7 the magical number
and now you can use this to say,
the height of the shin (on the pic) * the magical number (7) = the height of the shin or part IRL
I hope you got all of that because I'm sorry to say that I can't remember the name of the guy that came up with this method
and if he reads this post pleas feel free to correct me or comment
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

and by the way there is not an official release date on the V2 files other than the VIP's will have 2 months earlier access
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Darkside,

If you need extra detail photos i have the kotobukiya mk7 iron man statue. i can take high detail shots if needed for your v2 files.


Iron Man by Barros!, on Flickr
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Barros said:
Darkside,

If you need extra detail photos i have the kotobukiya mk7 iron man statue. i can take high detail shots if needed for your v2 files.


Iron Man by Barros!, on Flickr
Click to expand...

Very nice, I wish I had a Hot Toys figure or that NECA figure. It would be so helpful to be able to see it from any angle. The NECA isn't out yet and the Hot Toys are too pricy.

I wish the Kotobukiya was more accurate. Anyways, I am sure that some shots of it could still help fill in the blanks so-to-speak. I am redoing the back now so could you do some shots of the back while rotating the statue. Try and get as many angles as you can. For example, start on the right side, take pic, rotate 5-10 degrees, take pic, rotate, take pic, etc... And then do a downward angle in the same manner and an upward angle in the same manner. You can send me a PM when you are done so I can get the pics. ;) Thanks for the help.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

darkside501st said:
Very nice, I wish I had a Hot Toys figure or that NECA figure. It would be so helpful to be able to see it from any angle. The NECA isn't out yet and the Hot Toys are too pricy.

I wish the Kotobukiya was more accurate. Anyways, I am sure that some shots of it could still help fill in the blanks so-to-speak. I am redoing the back now so could you do some shots of the back while rotating the statue. Try and get as many angles as you can. For example, start on the right side, take pic, rotate 5-10 degrees, take pic, rotate, take pic, etc... And then do a downward angle in the same manner and an upward angle in the same manner. You can send me a PM when you are done so I can get the pics. ;) Thanks for the help.
Click to expand...

Yeah, I want a Hot Toys Iron man but def too pricey! NECA is coming out with some? gotta look into that. I have their Portal gun. haha.

you got it, man. I'll take those shots tonight or first thing tomorrow morning. I'll post them to my flickr account as a private section and give you the link.

edit: ....and NECA figure pre-ordered... haha.
 
Last edited:
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

Darkside:
I don't know if it'll be to late, but I've already pre ordered the hot toys mark VII witch will be here in may... all I need would be to borrow a friends camera if he still has it
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

sylvester86 said:
Darkside:
I don't know if it'll be to late, but I've already pre ordered the hot toys mark VII witch will be here in may... all I need would be to borrow a friends camera if he still has it
Click to expand...

It is just that seeing pics of it and actually holding it in your hands is two different things ;) But still pics are better than nothing.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

sylvester86 said:
Darkside:
I don't know if it'll be to late, but I've already pre ordered the hot toys mark VII witch will be here in may... all I need would be to borrow a friends camera if he still has it
Click to expand...

I'm already jealous.
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

I dont think using hot toys as reference for the back would be a good idea ..
Since the backpiec is the only unaccurate piece of ghe hot toys you should used the blueprints of the mark 7 with no backpiece, model it and then add the shoulder pod and flaps
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

omarbou1 said:
I dont think using hot toys as reference for the back would be a good idea ..
Since the backpiec is the only unaccurate piece of ghe hot toys you should used the blueprints of the mark 7 with no backpiece, model it and then add the shoulder pod and flaps
Click to expand...

what blueprint are you using and where did you find it ?
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

omarbou1 said:
I dont think using hot toys as reference for the back would be a good idea ..
Since the backpiec is the only unaccurate piece of ghe hot toys you should used the blueprints of the mark 7 with no backpiece, model it and then add the shoulder pod and flaps
Click to expand...

I am going to do it this way for the HD model. The LD model will just have the outer shape. Also, I am not putting all my eggs in one basket if you catch my drift. Just as you all saw the montage I put together on the part of the collar that I was asking about, I also look at many different pictures from several different reference sources for all the parts I am modeling. I don't just take one source and run with it.

sylvester86 said:
what blueprint are you using and where did you find it ?
Click to expand...

Yes, do tell... are you just referring to the side, front, and back views that we already have or something else?
 
Re: Darkside501st's Iron Man Mk VII pepakura files **Update Jan 3, 2013**

551438_425263594221167_111068425_n.jpg


Here's a pic of the V2 helmet I made :) Hope I did your files justice, Mike. ;)
 
You must log in or register to reply here.

Similar threads

Mauzzam1
Seeking Cardboard Iron Man Templates (MK3/MK85) – 2025 Working Links?
Replies
1
Views
855
Kolin86
Kolin86
paxtoprime94
Idea for Iron Man Suit that you can step right in/out of
Replies
1
Views
559
renaissance_man
renaissance_man
Colby8128
Spider-Man Dark Suit PS4
Replies
3
Views
1,146
Colby8128
Colby8128
paxtoprime94
“FABRIC” IRON MAN SUIT? (Fabric-covered foam?)
Replies
2
Views
685
Kolin86
Kolin86
Kolin86
Iron man mark 4 build (klakus cast)
2 3
Replies
43
Views
3,420
Kolin86
Kolin86
Back
Top