Limited Run CLOSED: Kylo Ren CNC aluminium ultra accurate Saber

[Brian N]

Payment sent for the heat sinks. Feels like we are getting closer! Can't wait to see some of these built.

 

[refugee]

Payment sent for heatsinks and wire

 

[dday]

Payment sent for the heat sinks. Feels like we are getting closer! Can't wait to see some of these built.

Payment sent for heatsinks and wire

gotcha both!

The machinist was supposed to start our stuff this week. Scott is on the ground where the machinist is, so waiting to hear if they have or not.

They have been trying some funny business but we're not putting up with that! We are close, that much is known!

 

[ZahcStarKiller]

gotcha both!

The machinist was supposed to start our stuff this week. Scott is on the ground where the machinist is, so waiting to hear if they have or not.

They have been trying some funny business but we're not putting up with that! We are close, that much is known!

What kind of funny business? Trying to jack the prices up again?

 

[medic2410p]

Probably more like delay production.

 

[ZahcStarKiller]

Probably more like delay production.

The nerve!

 

[Zelazny]

I want both heatsinks and wire please. I also sent an email. Thanks!

 

[ender9492]

Payment sent for the pair of heatsinks and the wire.

 

[GeneralFROSTY]

Here we go folks! Here is my prototype paint job on this kit. There are a few parts missing so please excuse that.
This will approximately be what my clients can expect from my shop if you choose to have your kit professionally finished. dday has all the info on hiring me for this. Customer must provide all parts not included with the kit.
Hope you guys like it! I look forward to doing more and excited to offer top quality service every step of the way.

 

[Brian N]

Is that an aluminum or plastic prototype you finished there GeneralFrosty?

 

[GeneralFROSTY]

Is that an aluminum or plastic prototype you finished there GeneralFrosty?

That's the all aluminum. I highly recommend at least getting the end cap in metal - the anodized paint will just look better.
The core parts I think you can be OK with resin, I'll just have to metalize them before detailing.

 

[ZahcStarKiller]

Here we go folks! Here is my prototype paint job on this kit. There are a few parts missing so please excuse that.
This will approximately be what my clients can expect from my shop if you choose to have your kit professionally finished. @dday has all the info on hiring me for this. Customer must provide all parts not included with the kit.
Hope you guys like it! I look forward to doing more and excited to offer top quality service every step of the way.
http://i1215.photobucket.com/albums...5-2016-0855130594979552785_wm_zpszcbvtpb8.jpg
http://i1215.photobucket.com/albums...5-2016-0852130591308074515_wm_zps15rl0zu5.jpg
http://i1215.photobucket.com/albums...5-2016-0848130587897918265_wm_zpsztvmcmag.jpg
http://i1215.photobucket.com/albums...5-2016-0844130584110412161_wm_zpsotjvigy0.jpg
http://i1215.photobucket.com/albums...5-2016-0841130580341765921_wm_zpsrqizo413.jpg
http://i1215.photobucket.com/albums...5-2016-0837130576715606252_wm_zpsvxxtl6q0.jpg
http://i1215.photobucket.com/albums...5-2016-0834130573303954640_wm_zps2bpmkdtw.jpg
http://i1215.photobucket.com/albums...5-2016-0830130569816436331_wm_zpsydmyhnu6.jpg
http://i1215.photobucket.com/albums...5-2016-0826130565289214651_wm_zps6sndp8qq.jpg
http://i1215.photobucket.com/albums/cc506/jimmy2step/DSC_0100_zpsnshqwol2.jpg
http://i1215.photobucket.com/albums/cc506/jimmy2step/DSC_0101_zpsiykzgyxh.jpg

Dear. God. SCHWINGGGG.

 

[vaderjeff1744]

BEAUTIFUL work there GeneralFROSTY! I do have a question for you GeneralFROSTY. If we have D-day provide the red wire with our kits, will you install them for us if we commission you to paint the hilt? Just curious if this service will be provided? Also wondering on details on pricing? Can you PM me details please? Thanks!:cool

 

[GeneralFROSTY]

BEAUTIFUL work there GeneralFROSTY! I do have a question for you GeneralFROSTY. If we have D-day provide the red wire with our kits, will you install them for us if we commission you to paint the hilt? Just curious if this service will be provided? Also wondering on details on pricing? Can you PM me details please? Thanks!:cool

Thank you for the kind words!
I have prepared a thorough PDF document that details everything you'll need to know for hiring me specifically for this incredible kit. Please follow the link below to view it.
The only part that is an additional cost is if the customer sends me the belt clip for mounting and painting.
Wires and emitter plugs will be included with my rate if you provide them.
It's a very well made kit, those involved with making it really did an amazing job.
I trust dday won't mind me putting a direct link to the info PDF here (might save him some email requests)
https://www.dropbox.com/s/azcjthcivce18zx/Hero Hilt Finishing.pdf?dl=0

 

[vaderjeff1744]

Thanks for the quick response GeneralFROSTY! D-day, I'm interested in getting the red wire with my kit, & having it sent to GeneralFROSTY for painting. D-day, is there any chance of arranging to get one of Luke Daley's functional saber clips, so it could be sent with my kit & red wire to GeneralFROSTY? I already have one of Luke's full kits that includes the metal belt clip. Wondering if it is possible to just get the metal saber clip and mounting hardware from Luke to be included with the saber kit? I'm sure others would be interested in the same. Don't know if you've thought about contacting Luke to make this an available option or not? If this isn't feasible, I'll have to contact Luke directly to see about getting the parts to install on my saber after the other work has been completed. Just some food for thought I guess!:cool

 

[dday]

Is that an aluminum or plastic prototype you finished there GeneralFrosty?

GeneralFROSTY; got one of the very first full alu pieces off the prototype line. So this is the real deal.

@@@@@@Outstanding!

 

[dday]

Thank you for the kind words!
I have prepared a thorough PDF document that details everything you'll need to know for hiring me specifically for this incredible kit. Please follow the link below to view it.
The only part that is an additional cost is if the customer sends me the belt clip for mounting and painting.
Wires and emitter plugs will be included with my rate if you provide them.
It's a very well made kit, those involved with making it really did an amazing job.
I trust dday won't mind me putting a direct link to the info PDF here (might save him some email requests)
https://www.dropbox.com/s/azcjthcivce18zx/Hero Hilt Finishing.pdf?dl=0

No problem at all, like you said, easier for me.

Thanks for the quick response GeneralFROSTY! D-day, I'm interested in getting the red wire with my kit, & having it sent to GeneralFROSTY for painting. D-day, is there any chance of arranging to get one of Luke Daley's functional saber clips, so it could be sent with my kit & red wire to GeneralFROSTY? I already have one of Luke's full kits that includes the metal belt clip. Wondering if it is possible to just get the metal saber clip and mounting hardware from Luke to be included with the saber kit? I'm sure others would be interested in the same. Don't know if you've thought about contacting Luke to make this an available option or not? If this isn't feasible, I'll have to contact Luke directly to see about getting the parts to install on my saber after the other work has been completed. Just some food for thought I guess!:cool

For folks who have setup to get wires from me I will be making sure that the red wires you ordered are included with your kits when they ship to their destination.

I'm working on blue wires as well, hope they get here soon.

Please though, when you speak to GeneralFROSTY; about finishing let him know if he should completely attach the cable holders and wire or leave the top part detached. If the cable is locked down, the installer will not be able to unscrew the top without detaching them.

 

[GeneralFROSTY]

Behind the curtain...

 

[bpatneaude]

Hey darren just letting you know i sent payment for heat sinks and wires. Also would like my saber sent to general frosty for finishing

Sent from my SM-N910P using Tapatalk

 

[Halliwax]

the paint job is amazing.. every time I see this thread bump I get super excited then super depressed.. it's like a bipolar ride.

super excited because of how great this thing looks, this has to be the most accurate cross blade to date! then super depressed because I'm poor..

I envy all of you on this list. it is truly a amazing piece!!


Sent from my iPhone using Tapatalk