blickfangQ2 (aka Neuer22) -3D- Iron Man 3 - Mark 42 / XLII or mk 43 / XLIII- DONE!!!

[blickfangQ2]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

One more thing:

I had to show you guys this quick update!! :love





as clean as it can be :lol :ninja

 

[TheRocketeer]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

Looking good getting better as you go through the suit.

Now I need to figure out ways to get these parts together and wearable.. and printable.

 

[blickfangQ2]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

Looking good getting better as you go through the suit.

Now I need to figure out ways to get these parts together and wearable.. and printable.

Thanks Curtis! Now that my internship is over I have a lot more time again

couldn't hold it back:

 

[Jaas]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

amazing first time in my life that i see a job so perfect finish quickly, please god bless you for your knowledge of patience and ability to show you a beautiful job.

Thanks Curtis! Now that my internship is over I have a lot more time again

couldn't hold it back:
View attachment 202517

 

[IronMechanic]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

What a post! Don't know where to begin... First of all, thank you for your kind words! I like your plans on doing charity things and make peoples days with a cool costume. Every plan to make them a bit happier is a great plan!

As for your dreams, I think this model will be a real pain to pep - but thats not a reason to don't pep it - I saw people build those ultra high res hand files like it was making a cup of coffee! So with some more patience everybody can enjoy these files for free with a decent resolution.

If you have any details on how the knees joint together or the shoes, you better don't wait until i'm finished - Cause then its finished
I won't build the full endosuit though...

Thanks again for your post!

OK I will start taking my crappy sketches and redraw them on graph paper. I literally have like 4 or 5 of them on napkins lol. Once i get them re-drawn then I will scan them in and post them to the thread.

Also the endo suit only really needs to be made for a few locations i.e. Shoulder, neck and chest/back, Knees, ankles, small sections of the abs. I will get to work on that today! hopefully i can get them all redrawn to some semblance to scale by Monday.

 

[Drack]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

That is just beautifull man! The level of perfect detailing is making it hard for me to want to do anything else but build this.

 

[Rysjin7717]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

Th' attention to detail on this is astoundin' top notch job on modelin' this Neuer22 absolutely beautiful.

Sent from my SGH-T989 using Xparent Skyblue Tapatalk 2

 

[TheRocketeer]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

So you may want to check with me as well, I'm the one building the real world suit I'd be interested in seeing what you have....but the cost involved in adding these things...it might not see the light of day. So I'm hoping they are simple solutions.

OK I will start taking my crappy sketches and redraw them on graph paper. I literally have like 4 or 5 of them on napkins lol. Once i get them re-drawn then I will scan them in and post them to the thread.

Also the endo suit only really needs to be made for a few locations i.e. Shoulder, neck and chest/back, Knees, ankles, small sections of the abs. I will get to work on that today! hopefully i can get them all redrawn to some semblance to scale by Monday.

 

[IronMechanic]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

So you may want to check with me as well, I'm the one building the real world suit I'd be interested in seeing what you have....but the cost involved in adding these things...it might not see the light of day. So I'm hoping they are simple solutions.

Most of them are about what are the best joints to use to give fluid movement without sacrificing move-ability and over all realism/accuracy.

 

[TheRocketeer]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

Well the uppers and the arms are already printed and being worked on...so may be a little late.

Most of them are about what are the best joints to use to give fluid movement without sacrificing move-ability and over all realism/accuracy.

 

[IronMechanic]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

Well the uppers and the arms are already printed and being worked on...so may be a little late.

Well it all depends on how you guys wanna do it. Its not like there is a rule that says you can never make a better version. Ill still convert my notes and post them up here.

 

[IronMechanic]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

one thing i noticed is the difference in the abs from the in move suit used and the model the silver bits are not connected side by side to the ab plates but are connected from behind using a sliding join they allow movement and bend to an otherwise rigid system. The ab plates on top are layered on top of the red parts that are then behind the silver parts imagine if you will a frame behind them holding them into place so they are like scales. the upper most sections can slide across the place below it.

sorry i didn't speak up sooner and get this stuff on the thread. i just wasn't thinking.

 

[IronMechanic]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

This series shows the edge pieces of the chest plate are separate from the main chest plate and actually have the ability to slide forward all along the length of the piece in response to shoulder movement forward. it seems to be anchored an inch of two from the bottom with a sliding joint and at the top there is probably one other on it. they probably have springs that will putt them back to their neutral position but they can slide up or down only forward and tilt in reference to the chest piece next to them.



The red diamonds are where i theorize they would be connected to the endo suit which clarifies the sliding bars that go towards the arc reactor this means the parts of the armor around the reactor are static and the other parts move in relations to them.

 

[TheRocketeer]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

The movie suit that RDJ wears has none of these sliding bits. It doesn't even have bolt details etc... Everything is connected to eachother in one big piece. Even the shoulders are connected, he slides it on from the side, it's flexible. And they CG the details in after the fact. Besides the abs will more likely be rubber. And adding an under suit...which they did not do for the movie, would add weight and much much more to the $$ amount. Everything your bringing up sounds great in theory. But to build a suit that did all this... It would cost $7,8,9k min and for me to do it would take a very long time. I think this suit will be compatible to the other suits, like the suits made by Masked Rider, they need to be this way to keep cost and production time down.

This series shows the edge pieces of the chest plate are separate from the main chest plate and actually have the ability to slide forward all along the length of the piece in response to shoulder movement forward. it seems to be anchored an inch of two from the bottom with a sliding joint and at the top there is probably one other on it. they probably have springs that will putt them back to their neutral position but they can slide up or down only forward and tilt in reference to the chest piece next to them.

View attachment 202967

The red diamonds are where i theorize they would be connected to the endo suit which clarifies the sliding bars that go towards the arc reactor this means the parts of the armor around the reactor are static and the other parts move in relations to them.

 

[IronMechanic]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

im not taking about building the endo suit. im just using the position showed on it from the people at trixster to show how the suit "works".

 

[blickfangQ2]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

im not taking about building the endo suit. im just using the position showed on it from the people at trixster to show how the suit "works".

okay, now I know how much you go into detail

Sure all those things would be amazingly awesome to have in the end, but I think we were hoping for just some pivot points for the bigger sections to connect.

Btw: let's move on with further posts in Biggeek1972's interest thread cause its more about the moveability but the model

 

[Carterbuilder12]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

You just keeps on surprising me the model is amazing, cant wait to se this complete Keep up the wonderful work :thumbsup
One question though in the forarm he has a room with a missile, do you any plan on adding that or? No problem if you choose not to Probably easier if you don't when I comes to peping it

 

[blickfangQ2]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

That is just beautifull man! The level of perfect detailing is making it hard for me to want to do anything else but build this.

Haha thank you! I would love to see your pep work!

Th' attention to detail on this is astoundin' top notch job on modelin' this Neuer22 absolutely beautiful.

Thanks man! That made me smile!

You just keeps on surprising me the model is amazing, cant wait to se this complete Keep up the wonderful work :thumbsup
One question though in the forarm he has a room with a missile, do you any plan on adding that or? No problem if you choose not to Probably easier if you don't when I comes to peping it

I'm glad you like it! I hope I can finish the legs soon, cause that's the only thing missing now - everything else is out to the printers
So unfortunately the answer is no (for now), we haven't build in a room for the arm missile. Not everyone can program servos to make all the electrification :/ so it will be up to the buyer in the end.

 

[jangofett89]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

This model looks amazing, i wish i had some pep skills to offer but sadly do not. Keep up the work havent seen any other model with such great detail

 

[blickfangQ2]

Re: Neuer22 - 3D - Iron Man Mark 8 / 47 / 42 / VIII / XLII Project W.I.P

Eye Candy time :love :love

I found some time to make better Renders of the current status





enjoy :thumbsup