-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Blade Runner - Deckard's Blaster (Version 3)
- Thread starter rgriesbeck
- Start date
-
- Tags
- blade runner
Re: 3D Printed Blade Runner Gun Kit
If a plastic gun is going to kill someone, it's gunna be this one. The stress to get it right is giving me an ulcer
If a plastic gun is going to kill someone, it's gunna be this one. The stress to get it right is giving me an ulcer
Sean
Master Member
Re: 3D Printed Blade Runner Gun Kit
I'd rather you walk away from It than get an ulcer. stomach problem's suck. golden rule. health before prop's...
I'd rather you walk away from It than get an ulcer. stomach problem's suck. golden rule. health before prop's...
Re: 3D Printed Blade Runner Gun Kit
Quick update, have handed the 1st 3D model we have onto another modeler who wants to make this a bit more functional. SO we're going to try to have the lever open the bolt, the trigger will move and are hoping the cylinder will open, but not sure about pivoting yet...
Quick update, have handed the 1st 3D model we have onto another modeler who wants to make this a bit more functional. SO we're going to try to have the lever open the bolt, the trigger will move and are hoping the cylinder will open, but not sure about pivoting yet...
CSMacLaren
Sr Member
Re: 3D Printed Blade Runner Gun Kit
Photo please!
Photo please!
Re: 3D Printed Blade Runner Gun Kit
We're printed the back 4 pieces, patience
Photo please!
We're printed the back 4 pieces, patience
Re: 3D Printed Blade Runner Gun Kit
For the first try, it works!!! Needs tweaking and re sizing as it's pretty tight, but it looks to be doable!
- - - Updated - - -
I'm looking for some good pics on how the cylinder hinges out and how the cylinder cover attaches, anyone got any? I've only found one, from 1 angle...
For the first try, it works!!! Needs tweaking and re sizing as it's pretty tight, but it looks to be doable!
- - - Updated - - -
I'm looking for some good pics on how the cylinder hinges out and how the cylinder cover attaches, anyone got any? I've only found one, from 1 angle...
CSMacLaren
Sr Member
Re: 3D Printed Blade Runner Gun Kit
Nuff said. ;-)
Nuff said. ;-)
Re: 3D Printed Blade Runner Gun Kit
Man, that's a nice blaster. Is it yours? If so, can I ask the maker? I'd think its a Tomenosuke, but it looks like the green leds light up too, and as far as I know, Tomenosuke didn't make a version where the green leds light up? Or am I mistaken?
Re: 3D Printed Blade Runner Gun Kit
Here's a really really early partial prototype. We don't normally print or share these so early in the process, but this is such a loved (and bizarre) gun, we need to see if our 3D model is even printable...
The bolt opens and slides and the box that holds the 4 LEDs and the switch opens for easy install and changing of batteries. Body and grips are printing now, should have more to share soon.
Like I said though, these are early, the 3D model isn't finished and the parts reflect that.
Here's a really really early partial prototype. We don't normally print or share these so early in the process, but this is such a loved (and bizarre) gun, we need to see if our 3D model is even printable...
The bolt opens and slides and the box that holds the 4 LEDs and the switch opens for easy install and changing of batteries. Body and grips are printing now, should have more to share soon.
Like I said though, these are early, the 3D model isn't finished and the parts reflect that.
Country Paul
Sr Member
Re: 3D Printed Blade Runner Gun Kit
Very cool definitely heading in the right direction
Very cool definitely heading in the right direction
