Unlimited Run Blade Runner - Deckard's Blaster (Version 3)

[rgriesbeck]

NOW SELLING:

Our version of a plastic Deckard Blaster kit. We've matched part for part and worked very hard to make this the most accurate 3D Printed Deckard Blaster around. This is our 3rd version and definitely our final version as I find it to be perfect now.

Your kit will come with 30+ pieces AND the screw & LED Kits. I am having theRocketeer make the new grips and tint them amber.

The pics are an assembled kit (minus the screws) with no sanding or clean up



The Tomenosuke kit and our kit



ASSEMBLY VIDEO

Check out the parts, size and assembly of this beauty - New video by Rob Griesbeck


PRICING:

1) BR kit - $125.00 (plus $15 shipping to US/Canada, $20 everywhere else) - PRICE INCLUDES SCREW & LED KITS

2) Resin Grips - now done by Soulinertia -

Unlimited Run - Custom Blade Runner Blaster Grips for rgriesbeck's 3D printed kits in Amber or Clear cast resin

Upgrade your PKD Blade Runner Blaster kit from rgriesbeck with a set of new solid resin cast grips! This is a joint effort between rgriesbeck and myself. These are made specific to fit the his blaster kits. You buy the kit from him and the grips from me. Each set of grips are cast in resin...

www.therpf.com

I've switched over to a google order form to make it easier to order my kits. Simply click the link, fill out the form and send the PP. All information needed is available in the form:

http://goo.gl/forms/p0YUUrS

 

[James Kenobi 1138]

Re: 3D Printed Blade Runner Gun Kit

I'm interested for sure, I kept hoping Adam Savage was going to produce a 3D kit like this.

Model looks great so far.

 

[rgriesbeck]

Re: 3D Printed Blade Runner Gun Kit

Oh ya, we're planning on having at least a few LEDs that work. The "battery pack" under the barrel should fit a 9 volt and operate the 2 LEDs in that area...

 

[Serenity]

Re: 3D Printed Blade Runner Gun Kit

Nicely done!

 

[mojo1971]

Re: 3D Printed Blade Runner Gun Kit

you know I'm in on this one too!!

 

[TheRocketeer]

Re: 3D Printed Blade Runner Gun Kit

You know I'm there...I'll come pick it up once its done

 

[Country Paul]

Re: 3D Printed Blade Runner Gun Kit

Very interested in this one

Looks like its gonna be good

loved my Samaritan kit

 

[rgriesbeck]

Re: 3D Printed Blade Runner Gun Kit

Very interested in this one

Looks like its gonna be good

loved my Samaritan kit

Thanks Paul, just to check my scale, could you please send me a length measurement on the one you have?

 

[CSMacLaren]

Re: 3D Printed Blade Runner Gun Kit

I'd be interested, depending on price, accuracy, etc. Do keep me posted in case I lose track of the thread.

 

[Sean]

Re: 3D Printed Blade Runner Gun Kit

depending on accuracy. I WANT ONE...lol

 

[rgriesbeck]

Re: 3D Printed Blade Runner Gun Kit

I know the concern and the pressure to be accurate. We are going to do our best to be as accurate as we can, including the text on the barrel, etc. I'm open to all feedback, if you notice something wrong as we develop this, please let me know

 

[Country Paul]

Re: 3D Printed Blade Runner Gun Kit

Here's some pics of mine for measurements/scale as requested,

I'll point out though before anyone else does that this is an offworld blaster upgraded with the metal parts but still nowhere near as accurate as a Coyle or a Tomenosuke (but it's the best I could afford in the UK :lol)

I think the barrel/receiver length are pretty close but I know that the grip angle is off on the offworld & I'm sure the accuracy hounds would have something to say about using it for measurements (that's enough apologising for my inaccurate prop)

but you asked & I didn't want to let you down if I can contribute at all

I'm sure there are lots of lucky folks on here who can give measurements from their Coyle or Tomenosuke or Sidkit,

Given how amazing your Samaritan was I'm sure that the Blade Runner blaster will be great

how are you thinking of doing the translucent amber grips, can they be printed?

personally I'd be happy with black grips like the patrolman's blaster but that's just me

Mega accuracy isn't the key factor for me just a nice looking prop

can't wait to see this happen, make sure I'm on the list when there is a list

 

[Sean]

Re: 3D Printed Blade Runner Gun Kit

My only gripe with the off world is the grip length. It's shorter than the other's mentioned..

 

[rgriesbeck]

Re: 3D Printed Blade Runner Gun Kit

Thanks Paul, the measurements are good. We're using image planes from the tomenosuke kit, so they should be really accurate. I just wanted to make sure the images we had were in scale to length.

That said, anyone with a tomenosuke kit who would post a pic with a ruler, ig would be much appreciated, and would bring you some good Karma

 

[AkDog]

Re: 3D Printed Blade Runner Gun Kit

Hello! Although this is my first post, I've been following the RPF for several months while looking for a BR blaster. This is exactly what I was hoping would pop up. I'd rather not spend the big bucks on a Tomenosuke, but I really, really want to put something together. This is perfect. Feel free to sign me up. I'm confident you'll knock something out of the park.

 

[Sean]

Re: 3D Printed Blade Runner Gun Kit

I can't help much. but here Is something. this Is a left grip for a tomenosuke kit. and a replacement barrel made for the kit by a member here....

 

[MrBugSlayer]

Re: 3D Printed Blade Runner Gun Kit

I would be interested in this kit. I'm already on the Vash the Stampede thread as interested and this is the other kit I would like to obtain.

 

[andrew3D]

Re: 3D Printed Blade Runner Gun Kit

Thanks for the measurements Paul. I'm the artist modeling the gun for Gries Monkey but I'm having difficulty finding reference for a top down view with the top of the slide facing the camera along with a picture of the gun with the camera looking down the sights. Could you please take a couple of these pictures for me? It would really help me out keeping the model as accurate as possible.

To answer your question about the translucent grips, we can print with a clear plastic but it will be decided during prototyping. I won't tolerate anything less then perfect so we will find a solution.

 

[rgriesbeck]

Re: 3D Printed Blade Runner Gun Kit

I can't help much. but here Is something. this Is a left grip for a tomenosuke kit. and a replacement barrel made for the kit by a member here....



View attachment 304170

Awesome man! From that we can make sure everything is scaled perfectly.

Thanks again!

As Bill Murray says " 'Oh, uh, there won't be any money, but when you die, on your deathbed, you will receive total consciousness.'

 

[Sean]

Re: 3D Printed Blade Runner Gun Kit

Your more than welcome. here are some of my off world.