ANOVOS issues (ANOVOS ONLY discussion)

[ECOLI]

Its a plus they are actually shipping. I have paid my invoice and am waiting the shipment notification. Is the lens of the helmet smoke/green it also looks like its bolted in place....either way kudos to Anovos I am glad I bit the bullet on this one. Not that everything is forgiven but this is starting to be a better sign that this company can deliver quality products again. I hope the momentum for them continues and the backorders start trickling out. Mando helmets are pretty complicated so this is a good sign the Sabine helmet if and when it ships will be well done.

 

[Bobafett46]

I'll be interested to see impressions on the Bobamaker version - I was very torn between going down that path and Anovos. As for the Anovos Mando visor, unless I am just going crazy, the visor is just a smoked lens without any distinguishable color to the tint.

 

[JetSetWilly]

It would be good if Disney gave a mandate for all of their products

 

[Bobafett46]

Anybody have a good recommendation for a display stand for the helmet (it does not come with one for those wondering)?

 

[Mr Mold Maker]

I'll be interested to see impressions on the Bobamaker version - I was very torn between going down that path and Anovos.

I know there are 10000000 3D printed versions out there of this helmet, I’d love to see how, say, BobaMaker’s stacks up against it.

So I got a Bobamaker helmet in for repainting a few days ago, happy to give you my thoughts with it in hand. These photos show the stock helmet just as it arrived to me. I also took one next to my proto helmet to show the size.

I do like the sculpture, however, it is super obvious it started as a Boba Fett Helmet. The proportions and finer forms are very “Boba.” I think he would have been better off starting with a proper ground up sculpture referencing the real helmet.

As for size, it doesn’t look like it but the Bobamaker is considerably bigger. Even a little bigger than my FPH2. The paintjob is pretty flat and missing some of the details like the ear and vent color variation just as an example. Virtually no weathering on the helmet save for a pass of black airbrushing. If you’ve got a larger head, Bobamaker may be a very good lid for you, but beyond that I honestly can’t say I’d recommend it personally.

In my opinion EFX is the helmet to get, but Anovos would be the next best thing.

 

[Bobafett46]

So I got a Bobamaker helmet in for repainting a few days ago, happy to give you my thoughts with it in hand. These photos show the stock helmet just as it arrived to me. I also took one next to my proto helmet to show the size.

I do like the sculpture, however, it is super obvious it started as a Boba Fett Helmet. The proportions and finer forms are very “Boba.” I think he would have been better off starting with a proper ground up sculpture referencing the real helmet.

As for size, it doesn’t look like it but the Bobamaker is considerably bigger. Even a little bigger than my FPH2. The paintjob is pretty flat and missing some of the details like the ear and vent color variation just as an example. Virtually no weathering on the helmet save for a pass of black airbrushing. If you’ve got a larger head, Bobamaker may be a very good lid for you, but beyond that I honestly can’t say I’d recommend it personally.

In my opinion EFX is the helmet to get, but Anovos would be the next best thing.

Did you do the paint job on your prototype helmet? It looks awesome!!!

 

[Spartan 061]

So I got a Bobamaker helmet in for repainting a few days ago, happy to give you my thoughts with it in hand. These photos show the stock helmet just as it arrived to me. I also took one next to my proto helmet to show the size.

I do like the sculpture, however, it is super obvious it started as a Boba Fett Helmet. The proportions and finer forms are very “Boba.” I think he would have been better off starting with a proper ground up sculpture referencing the real helmet.

As for size, it doesn’t look like it but the Bobamaker is considerably bigger. Even a little bigger than my FPH2. The paintjob is pretty flat and missing some of the details like the ear and vent color variation just as an example. Virtually no weathering on the helmet save for a pass of black airbrushing. If you’ve got a larger head, Bobamaker may be a very good lid for you, but beyond that I honestly can’t say I’d recommend it personally.

In my opinion EFX is the helmet to get, but Anovos would be the next best thing.

Thanks for the write-up! I was thinking about going with eFX anyway, but what specifically makes you recommend it over the Anovos?

 

[Mr Mold Maker]

Did you do the paint job on your prototype helmet? It looks awesome!!!

Yep, thanks!

Thanks for the write-up! I was thinking about going with eFX anyway, but what specifically makes you recommend it over the Anovos?

The reason I would personally chose the EFX is because it has direct lineage to the real helmets. Anovos is, as far as I know, a scan of a finished helmet that was printed and then molded.

Scanning and printing technology are insane these days, but it still isn’t a perfect 1:1 process. There is digital clean up, printing, mastering, etc. EFX is a true 1:1 cast from the master.

If I was to get super nit picky, which.. let’s be honest, I am super nit picky.. I would also point out issues with the Anovos castings. These pics show a very crunchy rear vent, and the Mohawk lines are just about anything but straight.

Finish wise, I believe EFX will put out something much closer, but that remains to be seen.

(I should also say, eFx, Anovos, bobamaker, and everything inbetween.. buy what you like. Buy what makes you happy. I’m not intending to take away anything from Anovos or Bobamaker, just sharing my own thoughts.)

 

[Spartan 061]

Yep, thanks!



The reason I would personally chose the EFX is because it has direct lineage to the real helmets. Anovos is, as far as I know, a scan of a finished helmet that was printed and then molded.

Scanning and printing technology are insane these days, but it still isn’t a perfect 1:1 process. There is digital clean up, printing, mastering, etc. EFX is a true 1:1 cast from the master.

If I was to get super nit picky, which.. let’s be honest, I am super nit picky.. I would also point out issues with the Anovos castings. These pics show a very crunchy rear vent, and the Mohawk lines are just about anything but straight.

The lineage question was the main reason I was leaning towards eFX, but the detail shots are making the decision easier as well! It being a numbered edition is also a nice bonus.

 

[Synz314]

Oh ****, I can't believe it's actually shipping. I got a Mandalorian helmet from MiGran Studios for a third of the price that I'm pretty happy with. Though sure I would prefer the Anovos or EFX.

I'd love to see a side by side comparison between the Anovos and EFX whenever the latter finally is in someone's hands. Based only on the promo images of them, certain details on the Anovos look more accurate to me.

 

[Bobafett46]

Yep, thanks!



The reason I would personally chose the EFX is because it has direct lineage to the real helmets. Anovos is, as far as I know, a scan of a finished helmet that was printed and then molded.

Scanning and printing technology are insane these days, but it still isn’t a perfect 1:1 process. There is digital clean up, printing, mastering, etc. EFX is a true 1:1 cast from the master.

If I was to get super nit picky, which.. let’s be honest, I am super nit picky.. I would also point out issues with the Anovos castings. These pics show a very crunchy rear vent, and the Mohawk lines are just about anything but straight.

Finish wise, I believe EFX will put out something much closer, but that remains to be seen.

(I should also say, eFx, Anovos, bobamaker, and everything inbetween.. buy what you like. Buy what makes you happy. I’m not intending to take away anything from Anovos or Bobamaker, just sharing my own thoughts.)

Fair point on the rear vent - that is one of my gripes. RE: the paint job on the Anovos, I have seen set images with both the glossier/laquered looking finish and the more matte tone. The Anovos clearly does not have a shiny finish, but after seeing your prototype, I think I am partial to the glossier look. What did you use to seal it?

 

[Mr Mold Maker]

Fair point on the rear vent - that is one of my gripes. RE: the paint job on the Anovos, I have seen set images with both the glossier/laquered looking finish and the more matte tone. The Anovos clearly does not have a shiny finish, but after seeing your prototype, I think I am partial to the glossier look. What did you use to seal it?

It is Alumaluster sealed with a 2K automotive clear coat like the real helmets. It’s actually a pretty in-depth process to weather and seal the chrome without losing any luster.



Any more questions on paint I’d be happy to answer in PM’s if I can. I can’t divulge too much on my sealing process but would be more than happy to help with the basics.

Anyways, I don’t want to clog up the thread any more on non-Anovos items. Sorry for the quick sidebar.

 

[tubachris85x]

I do like the sculpture, however, it is super obvious it started as a Boba Fett Helmet. The proportions and finer forms are very “Boba.” I think he would have been better off starting with a proper ground up sculpture referencing the real helmet.

It is Alumaluster sealed with a 2K automotive clear coat like the real helmets. It’s actually a pretty in-depth process to weather and seal the chrome without losing any luster.

View attachment 1245426

Any more questions on paint I’d be happy to answer in PM’s if I can. I can’t divulge too much on my sealing process but would be more than happy to help with the basics.

Anyways, I don’t want to clog up the thread any more on non-Anovos items. Sorry for the quick sidebar.

Hmm, are you putting down an intercoat, then adding the weathering and then hitting it with 2k?

 

[Mr Mold Maker]

Hmm, are you putting down an intercoat, then adding the weathering and then hitting it with 2k?

That is one way to do it, and one I recommend to most folks. This does still dull the chrome a bit.

To keep it brief, no, that’s not the process I’m using.. The oil paint weathering is going right on the chrome, which is not technically accurate but IMO produces a better finish. The 2K goes directly over that. There are some weathering steps after that as well. No intercoats.

 

[tubachris85x]

That is one way to do it, and one I recommend to most folks. This does still dull the chrome a bit.

To keep it brief, no, that’s not the process I’m using.. The oil paint weathering is going right on the chrome, and the 2K directly over that. There are some weathering steps after that as well. No intercoats.

Interesting, I was under the impression that direct application of 2k to Alumaluster would dull it, so you'd need to put some kind of water based sealer over it. Sealing anything with a silver/metal shine is always difficult without spending a lot of money.

 

[Inquisitor Peregrinus]

Following up to my previous. Got my package yesterday afternoon. Not bad. On the ordering page for the jumpsuit, they quote a 10-to-14-business-day processing time prior to shipping, and for this it was five. And less than a week in transit via UPS Ground.

On an initial once-over, it seems decently accurate. I'm going to be replacing the shoulder velcro, because no. And the left forearm pocket is requiring closer scrutiny. It's sewn to the sleeve all the way around -- no opening to slip the compad in. I need to check the measurement of the window in that pocket -- it seems a skosh small. And I have a recollection of there being a clear plastic pane in that window to cover the compad... Am I remembering old, bad data?

 

[TK1625]

Wish I could get my Rogue One Merrick Helmet and Cassian Andor jacket that I paid in full for over 3 years ago...

 

[Inquisitor Peregrinus]

Wish I could get my Rogue One Merrick Helmet and Cassian Andor jacket that I paid in full for over 3 years ago...

Yep. Don't get me wrong. I am still mad as hell that I'm still waiting for my FOTK kit, Picard "Darmok" jacket, and movie era Command "bomber jacket" that have been paid in full long since. Just hoping this might signal the beginning of the breakup of the logjam.

 

[darthjones]

Lawyers of anogos are trying to get the judge to block the lawsuit (47+48) after the complaint was updated in 42. the followups are arguments why it should not be blocked by the judge.

The argument against blocking the case looks great! I love the opening, about "adopting" the notion that Anovos would be in the clear for centuries because delivery times are "estimates." Love it! Looks like a robust argument against Defendants motion. Yes, keep at them with both barrels!!!!

 

[ggriffaw]

The argument against blocking the case looks great! I love the opening, about "adopting" the notion that Anovos would be in the clear for centuries because delivery times are "estimates." Love it! Looks like a robust argument against Defendants motion. Yes, keep at them with both barrels!!!!

What are you hoping is the outcome? If Anovos is driven out of business, doesn't that screw the people who have not received their products?