Zfishies Master Cheif Costume(BUILD)
- Thread starter Zfishies
- Start date
laxman09
Active Member
Re: Under Suit for Master Cheif Costume
for the visor, i'd suggest double-layering it to get a noticeable groove, that would also make it stronger, whereas using a dremel on it may break through (unless you've got a steady hand), and it would be weaker. that's how i would go about it.
do you have any pics of your helmet?
for the visor, i'd suggest double-layering it to get a noticeable groove, that would also make it stronger, whereas using a dremel on it may break through (unless you've got a steady hand), and it would be weaker. that's how i would go about it.
do you have any pics of your helmet?
Zfishies
Member
Re: Under Suit for Master Cheif Costume
[/URL][/IMG]
Just got done painting the top section, where it needs to be darker. going to paint the rest next weekend. so a double layer of the visor should do it? I think I could super glue the two together then super glue the visor inside the helmet. Thoughts? Also where can I get cushion for the helmet?
laxman09
Active Member
Re: Under Suit for Master Cheif Costume(BUILD)
nice, the helmet looks great! and it's just my suggestion, i'm not sure how the other halo makers do it, but it would make sense to double-layer the visor. i'm not sure if super-gluing it would be the best idea though, super-glue tends to cloud up clear visors. this might not be a problem with the reflective glass but again, i'm not certain.
cushion for the inside of the helmet, i would suggest peel-n-stick foam. I'm planning on using it on my skyrim helmet, since you can buy it cheap in sheet form, cut out a shape you like, and then simply peel and stick to the inside of the helmet!
nice, the helmet looks great! and it's just my suggestion, i'm not sure how the other halo makers do it, but it would make sense to double-layer the visor. i'm not sure if super-gluing it would be the best idea though, super-glue tends to cloud up clear visors. this might not be a problem with the reflective glass but again, i'm not certain.
cushion for the inside of the helmet, i would suggest peel-n-stick foam. I'm planning on using it on my skyrim helmet, since you can buy it cheap in sheet form, cut out a shape you like, and then simply peel and stick to the inside of the helmet!
Cbhurless
New Member
Re: Under Suit for Master Cheif Costume(BUILD)
If you are going to use a Drexel on the visor it will distort your vision. If you are alright with that use a clear visor over your gold visor, cut the ridges into the clear visor. When done with the ridges take only the clear visor and lightly heat the areas that have been cut. It will start to go clear again. If you do this with the gold visor it will distort the color.
Sent from my iPhone using Tapatalk - now Free
If you are going to use a Drexel on the visor it will distort your vision. If you are alright with that use a clear visor over your gold visor, cut the ridges into the clear visor. When done with the ridges take only the clear visor and lightly heat the areas that have been cut. It will start to go clear again. If you do this with the gold visor it will distort the color.
Sent from my iPhone using Tapatalk - now Free
Zfishies
Member
Re: Under Suit for Master Cheif Costume(BUILD)
I changed this thread to a Build I want to have this done by Oct 30th heres what I have to do
- Paint the helmet
- make Rondo and spread in armor
- install buckles to hold the armor on my body (I NEED LOTS OF FOAM PM IF YOU HAVE ANY FOR SALE!!)
Thanks I got it from echo5633 its top notch! For the super glue I wasn't planning on spreading it all over the visor probably just put some dots in the corners. And that's actually a really simple great idea for the cushion inside the helmet, why didn't I think of that duhhh hahah :facepalm
I changed this thread to a Build I want to have this done by Oct 30th heres what I have to do
- Paint the helmet
- make Rondo and spread in armor
- install buckles to hold the armor on my body (I NEED LOTS OF FOAM PM IF YOU HAVE ANY FOR SALE!!)
Zfishies
Member
Re: Under Suit for Master Cheif Costume(BUILD)
Since im going into much detail in the visor how can I get a honey comb look on the visor? the picture will explain.
Those circle-honey comb looking things on the visor is what im referring to if that makes sense.
Okay I followed you up to here. so when I make the grooves on the clear visor heat it then attach it to the gold visor? Sorry for the misunderstanding.
Since im going into much detail in the visor how can I get a honey comb look on the visor? the picture will explain.
Those circle-honey comb looking things on the visor is what im referring to if that makes sense.
Cbhurless
New Member
Re: Under Suit for Master Cheif Costume(BUILD)
How I would do it: tape the pattern on the inside if the clear visor, and take model paint "silver or aluminum" highly thinned out with paint thinner and paint the pattern onto the inside of clear visor with the thinner/paint mixture. Then remove the masking tape and glue together the clear, and gold visors using superglue/crazy glue around the outside edge (not on any visible surface as any glue that will bind these together will fog the visors or destroy your paintwork)
Sent from my iPhone using Tapatalk - now Free
How I would do it: tape the pattern on the inside if the clear visor, and take model paint "silver or aluminum" highly thinned out with paint thinner and paint the pattern onto the inside of clear visor with the thinner/paint mixture. Then remove the masking tape and glue together the clear, and gold visors using superglue/crazy glue around the outside edge (not on any visible surface as any glue that will bind these together will fog the visors or destroy your paintwork)
Sent from my iPhone using Tapatalk - now Free
Zfishies
Member
Re: Under Suit for Master Cheif Costume(BUILD)
Silver paint? why not black? the pattern looks to be dark not light, is there a reason why to use silver vs black? On the visor I do the pattern should I make the grooves on that visor as well? Or do a triple layer 1 clear (grooves), 1 clear (pattern), 1 gold visor.
Thanks! and the armor is painted and done just needs the buckles and rondo applied.
Silver paint? why not black? the pattern looks to be dark not light, is there a reason why to use silver vs black? On the visor I do the pattern should I make the grooves on that visor as well? Or do a triple layer 1 clear (grooves), 1 clear (pattern), 1 gold visor.
Zfishies
Member
Re: Under Suit for Master Cheif Costume(BUILD)
Going to order the visors tomorrow. Now back to the original issue, the under armor. Would a black morph suit be fine? Or should I do a combination of a motorcycle jacket & morph suit?
Edit: how much visibility will I be loosing btw? To the point where I cannot even walk/run?
Going to order the visors tomorrow. Now back to the original issue, the under armor. Would a black morph suit be fine? Or should I do a combination of a motorcycle jacket & morph suit?
Edit: how much visibility will I be loosing btw? To the point where I cannot even walk/run?
Cbhurless
New Member
Re: Under Suit for Master Cheif Costume(BUILD)
You will notice the grid pattern when you first put the helmit on, but a pair of sun glasses is worse then this as long as you thin the metallic color down enough, about 1 part paint to 100 part thinner. Remember you can always put more paint on, but on clear plastics you can't take it off. So thin coates, but put them on continueously so that it stays even. The big spong brushes that you can get at any hardware store have worked best for me.
Sent from my iPhone using Tapatalk - now Free
You will notice the grid pattern when you first put the helmit on, but a pair of sun glasses is worse then this as long as you thin the metallic color down enough, about 1 part paint to 100 part thinner. Remember you can always put more paint on, but on clear plastics you can't take it off. So thin coates, but put them on continueously so that it stays even. The big spong brushes that you can get at any hardware store have worked best for me.
Sent from my iPhone using Tapatalk - now Free
Zfishies
Member
Re: Under Suit for Master Cheif Costume(BUILD)
I'll pick up the paint thinner on Sunday, hopefully I can find a motorcycle shop I rather just buy it from somewhere near me rather then wait for shipping, thanks for your help! So the morph suit vs the motorcycle jacket. Im going to order a morph suit and if I need the jacket ill buy that.
I'll pick up the paint thinner on Sunday, hopefully I can find a motorcycle shop I rather just buy it from somewhere near me rather then wait for shipping, thanks for your help! So the morph suit vs the motorcycle jacket. Im going to order a morph suit and if I need the jacket ill buy that.
Last edited:
Zfishies
Member
Re: Under Suit for Master Cheif Costume(BUILD)
Just got done with and a 3rd coat after the 1st I sanded it down and applied the 2nd coat, and 3rd coat was just to even it all out. Sunday ill be removing the masking tape and working on the rest of the helmet and will be making and applying rondo to the inside of my armor.
Just got done with and a 3rd coat after the 1st I sanded it down and applied the 2nd coat, and 3rd coat was just to even it all out. Sunday ill be removing the masking tape and working on the rest of the helmet and will be making and applying rondo to the inside of my armor.
Zfishies
Member
The Rondo turned out VERY good. Im extremely pleased with it. So I figured out how I'm going to wear this. Will be a mixture of heavy duty velcro and a buckle system. I just ordered a motorcycle armor jacket, and a gold tinted visor. Will be picking up some gloves and a morph suit Thursday. Due to time ill have to detail the visor another time (before the Halo 5 release). underneath ill be wearing a morph suit and the jacket over that. Sorry for the late update.
Sent from my GT-N7100 using Tapatalk now Free
Sent from my GT-N7100 using Tapatalk now Free
Attachments
