Yet another M134 minigun (pic heavy)
- Thread starter OzDean
- Start date
Werstrooper
Well-Known Member
bloody beautiful build mate!
lokidwargod
New Member
Looks pretty awesome man.
OzDean
Well-Known Member
Sorry guys, I had planned an update but I've been away on holidays.
I'm going to primer the parts then use a pewter/silver spray and let that harden. Then I'll spray it black and rub it pack with some metho. I'll airbrush some blue/black on the edges and then dullcote after.
I was thinking about applying rust and dirt using chalks once that's done.
I'm going to primer the parts then use a pewter/silver spray and let that harden. Then I'll spray it black and rub it pack with some metho. I'll airbrush some blue/black on the edges and then dullcote after.
I was thinking about applying rust and dirt using chalks once that's done.
OzDean
Well-Known Member
Update:
Been flat out in the second half of last year creating props for local theatre.
I created this rose for Beauty and the Beast which featured remote controlled rigs so I could drop the petals on cue. This picture is of the full rose (I also created a half rose, 1/4 rose and the remote rig which has it's last two petals) so you can see that it kept me busy.
During the dress rehearsal I saw that Belle was struggling with the mirror the director (not a hands on creative) had made so I had to redo this prop too.
I made it from MDF and placed a light ring in it and a 2 way mirror. When the audience first sees it they just think they are looking at a mirror, then with a flick of a switch a picture of the beast appears. The picture below shows the original on top and mine below.
Sooooo.... back to the gun!
Picked up a cheapo wind chime and some gate handles at Bunnings.
Measured, cut and glued them together.
I had originally made the cross handle a bit wide so I cut this to length and inserted the new handles.
And I finally finished making the back piece. I just have the drop down to do and I've got this part finished.
Been flat out in the second half of last year creating props for local theatre.
I created this rose for Beauty and the Beast which featured remote controlled rigs so I could drop the petals on cue. This picture is of the full rose (I also created a half rose, 1/4 rose and the remote rig which has it's last two petals) so you can see that it kept me busy.
During the dress rehearsal I saw that Belle was struggling with the mirror the director (not a hands on creative) had made so I had to redo this prop too.
I made it from MDF and placed a light ring in it and a 2 way mirror. When the audience first sees it they just think they are looking at a mirror, then with a flick of a switch a picture of the beast appears. The picture below shows the original on top and mine below.
Sooooo.... back to the gun!
Picked up a cheapo wind chime and some gate handles at Bunnings.
Measured, cut and glued them together.
I had originally made the cross handle a bit wide so I cut this to length and inserted the new handles.
And I finally finished making the back piece. I just have the drop down to do and I've got this part finished.
Similar threads
