What's on your workbench? (no Star Wars, Marvel or DC stuff)

[DaBuild]

Bioshock Grenade Launcher

 

[yaris]

On my bench - Colt Pythons (Gel Blasters) added some lead weight for realism, painted one chrome and the other wood handle....Pulled R2 out of the dark to start the refurbishment program.....EDIT: Can't buy pistol grip where I live, so molded and cast another for a project..

 

[Shataan]

Rgriesbeck sent me 1 of his Vers. 3.5 Deckard Blaster 3D prints to finish for him. ;p Just mailed this off to him not long ago. Real .44 Cals fit in the Tumbler. Red LEDs slowly pulse on and off. Fun though tedius project.

 

[Cameron]

Getting close to the end of this long build.

 

[Seananigans]

A couple of Pulse Rifles, one mostly metal (just casting some Thompson pewter parts) and the other (Alien3 commando) 3d printed resin parts with a pla+ shroud and spas12 cage.
Also a Spas12 deac with a 3d printed replacement cage and grip.

 

[Bengrim09]

I had a small file for a Thanos bust
But I upscaled it for a massive 3D print
Oh boy what was I thinking

the shoulder armour is WIDE

 

[skiffy]

Nice Pulse Rifle Seananigans. Here's my WIP 1:18 scale Aliens APC scratchbuild.

 

[Captain Dunsel]

I just completed an “idealized” version of the “Theta” communicator.

There are skant few images of the original prop which allows me to make some artistic license choices in interpreting certain details, such as what the clearly two-part moire may have looked like, for example.

Here is the original (with the large blob of glue distorting the lower 1/4 of the moire)...

...and another shot which gives a glimpse of the rear of the comm.

Here is my “idealized” version:

 

[Bengrim09]

I had a small file for a Thanos bust
But I upscaled it for a massive 3D print
Oh boy what was I thinking
View attachment 1447840View attachment 1447841
the shoulder armour is WIDE

Half the shoulder

 

[Captain Dunsel]

This weekend, I also finished up a non-functional Wand Phaser II that I had decided to revamp with a more “screen accurate” look complete with:

- New aluminum and brass parts on the Phaser II
- Recut Phaser II body shells
-New Phaser II handle
-Replaced the Phaser II side and top heat sinks
- A new Phaser I emitter, acrylic half round, watch crown, Mylar extra crispy, and recut Phaser I shells.
- Brushed-on paint on both the Phaser I and Phaser II.

 

[BrooklynGuy]

I just completed an “idealized” version of the “Theta” communicator.

There are skant few images of the original prop which allows me to make some artistic license choices in interpreting certain details, such as what the clearly two-part moire may have looked like, for example.

Here is the original (with the large blob of glue distorting the lower 1/4 of the moire)...

View attachment 1448249
...and another shot which gives a glimpse of the rear of the comm.
View attachment 1448251

Here is my “idealized” version:

View attachment 1448250
View attachment 1448258
View attachment 1448259
View attachment 1448260
View attachment 1448261
View attachment 1448262

Nothing like a good communicator build. This is very slick, love it!

 

[blspro]

View attachment 1342255
Whats on my workbench IS my workbench. New workspace in the works, sit/stand desk in the center flanked by storage units on either side. All topped with russian birch worktable slab.

New display case for the collection thus far:

View attachment 1342345

Nice case. What type/brand?

 

[paulsboutique]

M240 incinerator, just working out the pilot light in brass and copper

 

[ScoobiJohn]

M240 incinerator, just working out the pilot light in brass and copper

is that functional? or those pipes just for looks? thumbs up if its functional

 

[paulsboutique]

is that functional? or those pipes just for looks? thumbs up if its functional

Not functional as in "kill them with fire and burn your house down",....... im just attempting to replicate the look of "functional"

 

[ID10T]

I need to open up my Panasonic boom box. The FF and REW buttons are both down and the auto stop is not working... need to get my tape out and be able to listen again!

Maybe I’ll document the process?

 

[mutronics]

I’ll finish it all one day.

 

[lmgill]

A little 3d print project.

 

[Bengrim09]

Update on my Thanos build
I’ve now printed all the parts and glued them together,
Just fill rub and primer for the next couple of months !!!
going to install LEDs and wires in the base for illuminated crystals before I glue that together,
the crystals will be resin printed in the correct colour.

 

[Ryan Clinton]

Still doing metal lando vibro axe blades!