TRON Legacy - Misc Props

Brucelee42

Well-Known Member
RPF PREMIUM MEMBER
Didn't really see a thread for these, so I thought I would do a catch all - for other items from the film.

First - Flynns mantle -

clock-sm.jpg

I would love to find the clock! But the items in the front are Yoshimoto Cubes, available from the moma store - MoMA Store - Yoshimoto Cube_

AAAAAiAUH_8AAAAAAIAyig.jpg


The glasses at the dinner table at flyns....

dinner1-sm.jpg

The closest I could find so far - Amazon.com: Square Plastic Wine Glasses 1 Piece Design Clear 8oz 6per Pack: Kitchen & Dining

For a $1 prop you can't beat it! - This has subtle stripes, but I can't tell if they are in the one Flynn is holding or not.

EMI-SWG8_1042010124935_full.jpg


Lastly I would love to make these - the mines that came out of the back of the car. I would love to find better images. I am guessing that they would be about 3-4" inches in diameter?

mine-spheres1-sm.jpg
 
I made a 3d model of what I thought they looked like but I've no idea how to go from there, definitely more a thinker than a doer unfortunately.
tron-legacy-other-props-spoilers-quorras-mines-rpf.jpg-47038d1299347865

dunno if this is any help.
cheerio
p.s. I'm thinking 4" although six would make the electronics easier and the plunger seems a little tubby.
p.p.s what he \/ said
 
Last edited:
The white mirror in Flynn's Grid Apt is from Ikea...it comes black but was obviously painted for the film. Sorry, no screen cap...
 
I was tempted to make Zuse / Castor's cane. The trick would be getting the light source small enough to fit in the mteal bit at the end. I made an umbrella with a light up handle and was able to fit the a Luxeon LED and batteries into about 4 inches to light up the acrylic handle I made. I'd have to figure out how to get that down to two or three inches for the cane.

Andy
 
Share some pics! Sounds cool...

I was tempted to make Zuse / Castor's cane. The trick would be getting the light source small enough to fit in the mteal bit at the end. I made an umbrella with a light up handle and was able to fit the a Luxeon LED and batteries into about 4 inches to light up the acrylic handle I made. I'd have to figure out how to get that down to two or three inches for the cane.

Andy
 
I would like to know how to make Clu's meditation balls that he uses when the Disk Wars is going on between Rinzler and Sam. I don't know if they already exist somewhere on the net or what a good way to make them so they would light up would be.
 
I was tempted to make Zuse / Castor's cane. The trick would be getting the light source small enough to fit in the mteal bit at the end. I made an umbrella with a light up handle and was able to fit the a Luxeon LED and batteries into about 4 inches to light up the acrylic handle I made. I'd have to figure out how to get that down to two or three inches for the cane.

Andy

Share some pics! Sounds cool...

*cough cough* http://www.therpf.com/f13/tron-legacy-castors-cane-third-run-103551/?highlight=castor+cane :angel
 
I would like to know how to make Clu's meditation balls that he uses when the Disk Wars is going on between Rinzler and Sam. I don't know if they already exist somewhere on the net or what a good way to make them so they would light up would be.

They kind of remind me of these: Amazon.com: Sof Sole Matrix Sneaker Balls: Sports & Outdoors which i just happen to have... The modification would be minimal e.g. painting, then inserting a plexiglass ring, and electronics.
 
Last edited by a moderator:
I would like to know how to make Clu's meditation balls that he uses when the Disk Wars is going on between Rinzler and Sam. I don't know if they already exist somewhere on the net or what a good way to make them so they would light up would be.

They're actually known as Baoding balls, I believe. Though those sneaker fresheners might have indeed been used, as IIRC, they're just about the right size and would have been a lot easier to put lights into.
 
Back
Top