The Definitive CW Arrow Thread

Thanks for putting all this together. I wanted to contribute something to this thread. Here are some screens of Ollies new jacket design from Cisco. Taken from this TVguide photoshoot video I found. Seems like the removed the from pockets and add a new stitch across the front.

http://youtu.be/INSY-l2-my0


Screen Shot 2014-12-05 at 9.28.34 AM.png
Screen Shot 2014-12-05 at 9.28.43 AM.png
Screen Shot 2014-12-05 at 9.30.04 AM.png
 

Attachments

  • Screen Shot 2014-12-05 at 9.29.30 AM.png
    Screen Shot 2014-12-05 at 9.29.30 AM.png
    1.4 MB · Views: 386
For the arm quiver consider using flip flops, their material is practically memory foam and the friction properties hold arrows well; I made a pair of mens flip flops onto a serviceable homemade bow quivers... lots of material to work with considering how cheap flip flops are online.

primal_gear_unlimited_quiver_2_by_waitingforrogo-d86jj44.jpgprimal_gear_unlimited_quiver_1_by_waitingforrogo-d86jitp.jpgcorridor_bow_by_waitingforrogo-d86j85k.jpg
 
Yeah they removed the pockets and added two new top seams and it looks like wide elastic waist bits that are riveted on. They also changed the shape of the bottom of the jacket. Otherwise pretty close to the last one.
 
View attachment 411668View attachment 411670

The hunt for the rubber shaft holders that were added to this is still on. My guess is they're right under our noses.

(The revised forearm quiver used since Season 2 was made from scratch, but patterned after this original.)

Greetings, I posted this about a week ago but I think it might have been lost in the deluge of posts.

what do people think of these two items for the fletchette holder.
http://www.3riversarchery.com/Replac..._baseitem.html
http://www.3riversarchery.com/Replac..._baseitem.html

the kwikee has the one sided wave vibe and if you zoom in on the forward gripper in the sdcc pic5 photo it looks to me that they have joined two of the selway grippers together to create the symmetry. There is a seam visible in the spacer between the second and third fletchette.

Cheers,
Russell
 
Greetings, I posted this about a week ago but I think it might have been lost in the deluge of posts.

what do people think of these two items for the fletchette holder.
http://www.3riversarchery.com/Replac..._baseitem.html
http://www.3riversarchery.com/Replac..._baseitem.html

the kwikee has the one sided wave vibe and if you zoom in on the forward gripper in the sdcc pic5 photo it looks to me that they have joined two of the selway grippers together to create the symmetry. There is a seam visible in the spacer between the second and third fletchette.

Cheers,
Russell

Looks spot on to me from the shape of both:
arrow-green-arrow-05.JPG

Rear one?:

5028.jpg

Front one?;

Untitled.jpg
 

Attachments

  • 5108.jpg
    5108.jpg
    45.4 KB · Views: 151
Yeah, you're right, I think they are the right styles of grippers but some of the details are off.

what ep is that low angle pic from Pinder??
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top