The Amazing Spider-man 2 - 3D Print Files/Pattern - FREE

[haha]

I was going to say that's a bit dark looking.. but I guess there's not much sunshine going on

But yeah; comparing these:

http://static.comicvine.com/uploads...167602-the+amazing+spider-man+2+poster+!!.png

with

http://twinstickgaming.files.wordpress.com/2014/04/amazing-spiderman-2.jpg

the second one obviously has been edited/ he's in sunlight

So your's is probably pretty accurate! Is this an edited file or using Ken's print?

 

[haha]

When are you thinking of getting this suit made?

I've got exams, but they finish on 12th June.

 

[Aron Wohlfart]

Here is a good shot of the movie suit



Sent from my iPhone using Tapatalk

 

[dungparker]

View attachment 322504Not the greatest shot but you get the idea. It cost £70

Can you post another pic , and do the blue color is dark too much ? I sew on the pic , is black
And also did you edit the color when print or you not ?
Can you still see out line on blue arena for sew
Do the blue color look good , acurate in person ?

 

[haha]

The blue is a bit dark, to be honest I think I WILL be lightening the colours.
But now that your's is printed there's not much point starting over it again...
Yeah, please take a picture of it outside or something...

My worry by looking at this suit is that you can't see the brick pattern, but the photo isn't the best so I hope you can

I'll be puff-painting brick onto my blue! What colour do you think I should do... metallic blue, should I lighten that with some white?

 

[dungparker]

The blue is a bit dark, to be honest I think I WILL be lightening the colours.
But now that your's is printed there's not much point starting over it again...
Yeah, please take a picture of it outside or something...

My worry by looking at this suit is that you can't see the brick pattern, but the photo isn't the best so I hope you can

I'll be puff-painting brick onto my blue! What colour do you think I should do... metallic blue, should I lighten that with some white?

Yea i think the color is dark, i cant see brick pattern
Hoping him share more pic,
And what does metalic blue color look like ?

 

[Aron Wohlfart]

Yea i think the color is dark, i cant see brick pattern
Hoping him share more pic,
And what does metalic blue color look like ?

I am waiting for the colors:
Slick navy blue
Slick royal blue
Metallic blue
Metallic black
Pearl midnight blue

I will make pics when i got and tested them on the bricks of my test suit
But that can take a week more.


Sent from my iPhone using Tapatalk

 

[dungparker]

I am waiting for the colors:
Slick navy blue
Slick royal blue
Metallic blue
Metallic black
Pearl midnight blue

I will make pics when i got and tested them on the bricks of my test suit
But that can take a week more.


Sent from my iPhone using Tapatalk

Awesome ,and about the print , do you gonna edit the pattern to print or not

 

[Aron Wohlfart]

Awesome ,and about the print , do you gonna edit the pattern to print or not

I try the paints for the suit i have printed already

For kens file im not sure yet.
Maybe i will do it all different and try the bricks n webbs been screen printing on red and blue colored fabrics.



Sent from my iPhone using Tapatalk

 

[kenlandrum]

HAVE AN ISSUE WITH THE SIZE OF THE MODELS I HAVE HERE??
OK. I will explain how to remedy the situation.

I have built all of these parts in 3dsMax. My working units are millimeters. I then output stl and sometimes obj files for everyone and they are in millimeters as well.

For some reason SOME 3d print applications don't play well with 3dsMax when it comes to unit conversion. If you feel like the file you are about to print seems small, and I mean really small, simply run it through "Netfabb" and convert the units from "Inches to MM" I have no idea why netfabb thnks the file in in inches, but it, and other 3d print apps have this issue.

You may ask, why don't I just convert all of the file in netfabb and put those out there for everyone to download? Well, not everyone needs the file converted and it would be a cluster-f--k for me to try and keep track of which files are converted and which are not...

Here is a pic of how to do this conversion if you need it.... it's super simple and takes only seconds.

I also found when uploading these files to places like "Shapeways", when they ask "what units are the files?" You must select INCHES even though it is in MILLIMETERS.

Hope this helps.
Ken

 

[kenlandrum]

Regarding Sizing the Suit... check the link below... toward the end of the page.

http://www.therpf.com/f78/spider-man-raimi-3d-print-files-pattern-free-207565/index2.html

 

[Soulgypsy]

I guess none of the companies has a shine like the tasm2 movie suit.
They used some kind of nylon spandex or something ^^ i didnt find an company that offers that. ......yet


Sent from my iPhone using Tapatalk

Look at the 70's spiderman TV show. The red looks like its on a different material than Lycra and its pretty dark

 

[HawkBlade]

kenlandrum, maybe, just a thought, to add your last two posts (unit convert, and resize) to the first post (entire or link to your posts on them? this way maybe get less requests on both items within the tread?

 

[kenlandrum]

kenlandrum, maybe, just a thought, to add your last two posts (unit convert, and resize) to the first post (entire or link to your posts on them? this way maybe get less requests on both items within the tread?

GREAT idea!
Thanks.

 

[Aron Wohlfart]

Look at the 70's spiderman TV show. The red looks like its on a different material than Lycra and its pretty dark

When u look up nylon spandex it looks like the tasm2 suit.


Sent from my iPhone using Tapatalk

 

[Soulgypsy]

Spandex World fabric Catalog - 11068

 

[Aron Wohlfart]

Spandex World fabric Catalog - 11068

That one is a nono.
You have to look. It is a 2way stretch. Means it only stretches in one direction.
If i stretch it in the other diretcion it can break.


Sent from my iPhone using Tapatalk

 

[Aron Wohlfart]

Etsy sells 4way stretch.


Sent from my iPhone using Tapatalk

 

[ultimate spider]

5.5 cm long

- - - Updated - - -


No. Convert from mm to inches when uploading

Thanks for the help!

 

[xTapz]

What thread?

The guy at the top ^ said there was a thread about some one making a full size paper template for the suit.